S&T Airsoft

If you're running an S&T Lee Enfield and need more mags, these will do the trick! The 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is patterned after the real steel No.4 MK.I detachable magazine which differs slightly from the earlier No.1 MK.III mags in the geometry of its reinforcement ribs. This makes this mag perfect for the stitch counters who need the perfect look for their No.4 MK.I but for those less picky Lee Enfield wielders, this also fits the S&T Rifle No.1 MK.III.

As with the No.1 MK.III magazine, this mag is loaded through the fill/feed port at the front of the magazine body using a speed loader or loading tool. The mag is finished in a realistic gun metal grey with an antique look, steering well clear of any hints that this mag isn't the real deal. If you're an observant skirmisher or collector seeking the correct magazine for your S&T Lee Enfield Rifle No.4 MK.I, the 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is exactly that!

If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world. 

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

If you are into WW2 reenactment and fancy a Red Army loadout, then S&T has just the thing for you! The Mosin-Nagant M1938 Bolt-Action Rifle is a near-immaculate replica of the Mosin-Nagant M1938 Carbine that the Soviet Army used during WW2. It was less common than its older brother, the Mosin-Nagant M1891/30, but it is still an iconic platform nonetheless. It is made from real wood giving it that authentic feel and weight.

S&T's Mosin M1938 replica follows a similar format to its longer counterpart, the M1891/30, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that would be equally at home in a glass cabinet as it would be on the skirmish field. From a performance standpoint, this M1938 is no joke, coming out of the box shooting at approximately 400 FPS when we tested it, and it's also compatible with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant replica that shoots as exquisite as it looks, this is one of the finest available!

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

An accurate 6mm BB Airsoft Electric Gun replica of an iconic piece of movie history, an all Alloy constructed replica of the Sterling E-11 Blaster. 

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

If you need a gun on your gun so you can shoot while you shoot, the S&T G316 Grenade Launcher is ideal! This imposing piece of equipment is designed for AR36 platform Airsoft guns, and will install in place of your handguard to provide an awesome under barrel 40mm Grenade Launcher for you to effortlessly fire Airsoft MOSCART Grenades from underneath your Assault Rifle. 

The included handguard is designed to replace either the K or the E (full-length) AR36 handguards, so if you want to add it to your AR36C you will most likely need a barrel extension to clear the handguard. If you want a serious firepower upgrade for your AR36, then the S&T G316 Grenade Launcher is just what you were looking for!

Do you need a couple of spare magazines for your Type 38 or Type 97? This is exactly what you are looking for! It is a direct copy of the magazine that comes with the Arisaka rifles and therefore it will be a guaranteed fit. This does however mean that it is ONLY compatible with these rifles and no others.

It is constructed from a high-density polymer and holds 26 BBs, it's the perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer. Its spring-fed design negates the "battle rattle" effect, allowing you to stay sneakier!

If you're a WW2 reenactor looking for a period-accurate sniper rifle replica, the S&T Type 97 Arisaka Bolt-Action Sniper Rifle gives you one more superb option to consider! This full metal spring bolt action sniper rifle features a real wood stock, authentic arsenal markings, an integral monopod and a beautiful replica of the real steel Type 97 2.5x scope to top it off. On the outside, this Type 97 replica is practically flawless and the ideal piece to finish off your Japanese Imperial Army impression or to compliment your Type 96 LMG!

Internally, we are treated to a 6.03mm tightbore inner barrel, improving accuracy potential and helping you squeeze every last bit of useful FPS from the pre-installed spring. The trigger sear is a 90-degree example, reducing stress to allow for stronger springs to be used, and the HOP-up bucking, inner barrel and mainspring are all VSR-10 compatible; perfect for those who simply must upgrade everything they touch. Whether you have a taste for classic platforms or you're working on a perfect IJA loadout, the Type 97 is the perfect addition to your arsenal!

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!

Those looking for a lightweight backup weapon with fully fledged special forces style looks you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real world platform we all know and love, and that is widely issued to special forces of almost every nation in some form.

The ST46 is constructed almost entirely from high density polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. High density polymer may be less realistic, but it will not show damage as readily as a full metal gun might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. If you need a lightweight solution, either as a primary or a backup, the ST46 is the perfect thing!

If your Lee Enfield is out of action, hopefully, this will cure it! The S&T Loading Ramp for SMLE NO.1 MK.III S.M.L.E Bolt Action is constructed from high density polymer with steel screws and is a replacement original part for the S&T S.M.L.E spring bolt action rifle. This is the part that transports the BBs from the magazine into the HOP-up chamber, known as the "Loading Ramp", and is a common part which gets worn down over time. Whether your Enfield needs fixing or not, this is a great part to have in the tool box!

If you like a challenge in game, this will certainly give you that! The S&T ST870 Marine Magnum is a single-shot pump action shotgun boasting full metal construction, a 6.03mm tightbore inner barrel, a TDC HOP-up unit and 400 FPS +/- 10% out of the box. "But why on earth would I want a single-shot, high FPS shotgun?" we hear you ask...

The ST870 may not be your CQB platform of choice, but it fulfils a different role. This shotgun is intended to simulate a real M870 shotgun firing 12 gauge slugs which are a single, solid projectile intended for long-range engagements and hunting. This means the ST870 falls into the same class as DMRs and Sniper Rifles when it comes to skirmishing, with the added challenge that there are no iron sights or rails to be found. If you are finding skirmish life a bit too easy with a sniper rifle, the ST870 will make you work even harder but give you even more satisfaction when you land the kill!

If you have caught AR-9 fever (it's contagious!) but you want something realistic, and ultra-compact, EMG has something for you to take a look at! The Angstadt Arms SCW-9 is a modern AR-9 platform designed to be as compact as physically possible for concealability when used by close protection details and bodyguards and fortunately for us, this translates directly into a seriously competitive CQB platform that is probably the most compact option on the market right now. 

This pocket-sized M4/AR15-derived submachine gun features full metal construction, a female threaded outer barrel complete with14mm CCW male thread adapter and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock makes this tiny boi barely bigger than a pistol. If you want the edge when it comes to challenging CQB scenarios, the SCW-9 would be a great choice!

If an Airsoft sniper rifle will be your next buy but you want something that stands out in the safe zone yet blends in in the field, the S&T SV-98 Bolt Action Sniper Rifle; Real Wood is a great choice. This full metal spring-powered bolt action sniper rifle replicates the real steel SV-98, the standard sniper rifle of the Armed Forces of the Russian Federation.

While the S&T SV-98 uses the quite frankly superior L96 receiver design, the muzzle device, detachable steel carry handle and super realistic real wood stock finished in green paint like the real thing make it a fantastic balance between practicality and realism. Inside, we are also treated to some generous pre-upgraded parts, including a 6.02mm tightbore inner barrel along with full HOP-up bucking and inner barrel compatibility with prolific VSR/GBB aftermarket replacements.

Whether you're running a full Russian Army loadout with a Leshy suit or you fancy a change from the usual VSR-10 and L96 sniper rifles seen on skirmish sites, the S&T SV-98 Bolt Action Sniper Rifle; Real Wood will suit you perfectly!

An extremely authentic 1:1 scale Airsoft replica of the infamous Springfield M1903A3 bolt action rifle that saw service throughout WW1 and WW2, this spring powered replica is constructed from genuine wood and alloy.

This MK7 Sterling is a replica of the rare Para-pistol SMG. It is a variation of the Sterling Submachine Guns that was produced for only 18 months from 1986 to 1988. This SMG was designed to provide paratroopers and non-infantry personnel with an automatic compact alternative to their pistols. The Airsoft replica doesn't quite have the same decorated history, but it looks just as stunning and would be a fine addition to any old military replica collection or wartime reenactor's arsenal.

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T MK7 Sterling is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it at home (we don't judge!). Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the underside of the outer barrel. If you're looking for an old-school rare SMG or are working on your historic British firearms collection, you need the S&T MK7 Sterling!

If you have caught AR-9 fever (it's contagious!) but you want something realistic, EMG has what you need! The Angstadt Arms UDP-9 is a modern AR-9 platform which is popular on the US civilian market and boasts full Angstadt Arms trademarks thanks to EMG.

This compact M4/AR15-derived submachine gun features full metal construction, a 14mm CCW male threaded outer barrel and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB and has a nice rate of fire if you want to stretch this lil guy's legs in an outdoors setting. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock allows it to be pocket-sized but still make use of buffer tube style stick batteries. If you want ARP-9 like short barrel with a healthy dose of realism, the UDP-9 would be a great pick!

An incredibly realistic Bolt Action Sniper Rifle Replica of the Type 38 Service Rifle, which was used by the Empire of Japan mainly during World War 2. It features a solid and pleasant Real Wood Stock as well as an Alloy/Steel Receiver for a weighty and realistic replica that is perfect for re-enactment or displaying on your wall.

An M203 Grenade Launcher replica which fires 40mm MOSCART Grenades and attaches to rifles either by a 20mm rail or direct to an M4/M16 outer barrel.

An M203 Grenade Launcher replica which fires 40mm MOSCART Grenades and attaches to rifles either by a 20mm rail or direct to an M4/M16 outer barrel.

A spare/replacement Magazine for the S&T M1903A3 and KAR98K Rifles, holding a total of 25rnds and being filled using a Speedloader. These lightweight and low profile Magazines are super easy to carry on your person, and will be the difference between holding your position until endex (end of the game), or walking back to the Safe Zone early to reload.

If you're experiencing feeding issues with your S&T Lee Enfield No.1 MK.III, this should cure it! The Loading Plate for S&T Lee Enfield No.1 MK.III Rifles is an original replacement part, constructed from high density polymer. The set includes the loading plate itself and its C-clip retainer and is confirmed to be compatible with the S&T Lee Enfield No.1 MK.III but compatibility with S&T's No.4 MK.I rifle is yet to be confirmed. 

Whether you've been unlucky and broken your loading plate or want to get ahead of a potential future failure, the S&T Loading Plate for S&T Lee Enfield No.1 MK.III Rifles is ideal!

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

Feel the weight of this absolute classic! With a full metal build and incredibly satisfying pump action, this shotgun features the original full-length build with beautiful faux wood stock and pump.

The shotgun is single shot, firing at roughly 370 FPS, which is incredibly reliable for taking people out on the field at close range or at a distance.

If you are looking for some BBs to feed your glorious upgraded rifles look no further! The S&T 0.32g Precision 6mm BB; 3000rnd Bag are the ideal BBs for your outdoor skirmishes, these finely polished Airsoft BBs are constructed from polymer and are flawlessly polished for maximum accuracy and reliable feeding. 

Supplied in a resealable bag containing approximately 3000 BBs, these BBs have excellent quality and ensure excellent performance over long distances. If you value your accuracy and need a BB with the perfect combination of weight, affordable price and high quality, the S&T 0.32g Precision 6mm BB; 3000rnd Bag is exactly what you need!

Upgrade your Lee Enfield with a superior cylinder. Tough and durable, the cylinder is specifically for the Lee Enfield S.M.L.E No. 1 MK III, with the cylinder set constructed from stainless steel and Teflon coated, to reduce piston friction. As a result the set can work with high-power springs. 

If you love a bit of old-school cool or have a thing for Japanese firearm replicas, the S&T Nambu Type 100/40 Submachine Gun AEG; Real Wood should excite you! This beast of a Type 100 replica mimics the real steel Type 100/40, constructed from flawlessly finished alloy and steel with a gorgeous real wood stock to top it off. Externally, this thing is a perfect match for the early war Japanese SMG issued to naval raiders and is perfect for a Japanese Imperial Army loadout or as a wall hanger to dominate the man cave. 

Inside, we are treated to some solid internal components, including reinforced steel gears, steel bushings, a quick-change spring system and a high torque motor with a 6.03mm tightbore inner barrel to ensure your BBs fly straight and true. The gearbox shell is a unique shape constructed from alloy and compatible with most V2/3 upgrade parts, though the Type 100/40 shoots superbly straight out of the box. If you like lesser-seen platforms or collect WWII replicas, the S&T Nambu Type 100/40 Submachine Gun AEG; Real Wood should put a massive grin on your face!