Airsoft M4/AR-15 Magazines

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

For those of you looking for an ultra modern styled STANAG magazine this is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

Looking for polymer mid-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 150rnd LS-Mag Mid-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.