Specna Arms Airsoft

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

Specna Arms have their ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs. This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

The Specna Arms SA-46 CORE is an incredibly tough Electric replica of the MK46 Light Machine Gun, which features a lightweight but solid Polymer Receiver, but also has an Alloy Railed Handguard and Steel Bipod which brings the total weight up to 5.5kg. Crammed full of goodies such as a Quick Change Spring System, Electronic Trigger, Rotary HOP Unit and Auto-Winding 2500rnd Box Magazine, this is the ideal choice for someone wanting to lay down the pain.

If you're looking for heavy-weight sniper BBs on a budget, Specna Arms ONE 0.40g 6mm BIO BBs should be right up your street. These biodegradable 6mm BBs are supplied in a resealable bag of 1000 rounds approximately and are 0.40g in weight, making them great for sniper rifles and DMRs with upgraded HOP-up parts.

Being made from biodegradable materials means minimal clean-up on your home range and the ability to get involved in skirmishing at any outdoor site in the country, even the stricter sites which mandate bio BBs!

If you're after affordable heavy-weight BBs, Specna Arms ONE 0.30g 6mm BIO BBs are a fantastic option. Supplied in a resealable bag containing 1000 BBs approximately, these BBs are made from biodegradable materials, making them great for outdoor target shooting and skirmishing alike. 

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're trying to feed an ammo-hungry LMG without emptying your wallet, Specna Arms ONE 0.30g 6mm BIO BBs are a great way to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries. 

11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.

A 7.4v LiPo Battery for Airsoft Electric Guns, specifically the Specna Arms PDW range and other replicas with a tight/compact Battery Compartment. The Battery has a capacity of 600mAh, and a discharge rate of 20/40C. The compact size of the Battery makes it ideal for PDW Stocks, Pistol Grips, PEQ Boxes and other tight battery spaces.

A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!