Big Dragon

*When ordering this item you will receive either a transparent or smoked speed loader at random 

If you have ever needed one and not had one, you will know! The Big Dragon Speed loader is a small and compact Airsoft BB magazine speedloader that is shaped to fit into pistol magazine pouches. The loader comes with a pistol magazine adaptor which makes loading up GBB magazines considerably easier and can hold 100 BBs per fill. To fill the loader, all you need to do is pour BBs into the fill window at the top of the loader, close the fill window and press the button at the side which will extend the thumb plunger. You are now ready to load!  

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

If you're like some of us, and your thumb gets tired loading your 10 mid-cap loadout, this speed loader is what you need to alleviate that thumb ache! Introducing the 1000rnd BB Speed loader from Big Dragon. This loader is compatible with an M4/AR15 low or medium capacity magazine and is capable of effortlessly filling a magazine in just a few seconds with its crank-driven operation.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

If you are a mid-cap user, you can never have too many speedloaders! The Big Dragon 150rnd Large Speed Loader is slightly larger than the usual 90rnd speed loader, meaning you can fill most mid-caps with a single loader fill. 

The loader is filled through its fill window at the top, and to load your mid-cap, align the loading port with the fill/feed port on your mag and push the thumb plunger until it becomes firm. The thumb plunger can also be stored inside the loader for easier carry by pushing it down and pushing the side button in. 

This loader works with any Airsoft mid or low-cap mag, and if you run multiple different weights or types of BB you will need several to stay organised! 

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!