Airsoft Stocks

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Minimalist Folding Stock is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium to reduce weight when compared to 90% of other stock setups around, and the stock folding and mounting mechanism is constructed from steel for extra strength. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing a low profile stock option with QD sling sockets in either side and a textured rubber butt plate for added grip.

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.