Airsoft Artisan

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

If your Scorpion EVO stock has developed a bit of wobble or you fancy an ergonomic upgrade, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 will take your EVO to the cutting edge! This stock adapter is constructed from CNC-machined aluminium and allows 1913/20mm Picatinny compatible stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913 interface allows you to swap your stock in seconds whenever you feel like it, giving your EVO extra flexibility to meet the requirements of the mission at hand. If you fancy an aesthetic change for your EVO with loads of functional benefits, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 is ideal for your build!

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762 Dummy Suppressor belongs on your gat! Well suited to Sig MCX and Rattler builds but compatible with any Airsoft platform with a 14mm CCW male threaded barrel, the SRD762 makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Externally, the SRD762 takes a walk on the wild side, equipped with a menacing spiked front end designed for breaching doors in real steel form. The exterior profile is ribbed to match the real thing, intended to help dissipate built-up heat but serving in Airsoft terms to keep the SRD762 looking faithful to its real steel counterpart. 

Inside the SRD762 you'll find a spacer designed to accommodate a 34mm diameter tracer module and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762 Dummy Suppressor is as well-made and good-looking as they come! 

If you like your sidearm equipped with the latest sight setup, you'll need the RMR Mount w/ Front & Rear Sight for Tokyo Marui EU17/26 GBB from Airsoft Artisan. This set includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your Tokyo Marui EU17 or EU26 GBB pistol.

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. Compatibility-wise, this set is designed for the Tokyo Marui EU17 Gen 3 and EU26 GBB pistols but in all likelihood won't fit the newer EU19, EU34 or the full auto EU18. If you need to get on target faster with your handgun, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for Tokyo Marui EU17/26 GBB is what you need!

If you're following modern real steel trends and want a red dot on your sidearm, Airsoft Artisan has what you need! The RMR Mount w/ Front & Rear Sight for WE EU17 GBB includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your WE EU series GBB pistol. 

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. This set is designed for the WE EU17 GBB and as such should also fit WE EU19 and EU34 GBB pistols but won't fit WE EU18 GBB pistols due to their redesigned slide. If your EU series needs a touch of modernity, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for WE EU17 GBB will provide!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

Do you find that there are not enough attachment slots on your current MCX handguard? If so then the Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is for you! It features a modernised design with a 20mm Picatinny rail on top and M-LOK sections at 3, 6 and 9 o'clock, plus additional offset M-LOK slots at the lower diagonals and in line with the gas block cutout. This is an improvement upon the original MCX handguard as the extra M-LOK slots allow for more attachment space and the added angles mean more customisation is available when it comes to style and ergonomics.

This handguard and barrel are constructed from CNC machined aluminium, which makes them not only very strong but also ensures that they are flawless in their design. The Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is the best way to give your MCX an external facelift and keep it up to date with the latest MCX variant, the MCX-SPEAR.

If you're looking for a super-slick suppressor to finish off your cutting-edge build, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is calling your name! This suppressor is flawlessly machined using CNC technology, making use of high quality aluminium and steel throughout the build. As we might expect from Airsoft Artisan, this suppressor is an absolutely gorgeous sight to behold, with some of the most precise machining we've seen on an Airsoft suppressor. 

The set includes two mounting options; a QD suppressor collar with a tri-prong flash hider and a direct thread collar, allowing you to switch between QD and direct thread depending on the mission's requirements. Included in the set is a tracer module spacer for 34mm diameter tracer modules (not included) and an aluminium tube designed to support an extended inner barrel or prevent BBs from impacting the inside of the HELIOS. 

Finished in eyecatching Titanium Grey with an aesthetic unlike any other suppressor, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is the perfect finishing touch for a modern "gucci" build!

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

If your MP9 or TP9 is due a style up, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will add a touch of modernity to your beastly SMG! This stock adapter is constructed from CNC machined aluminium and allows cutting-edge 1913/20mm interface stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913/20mm interface allows you to swap your stock in seconds whenever you feel like it or even ditch the stock entirely to run your MP9 in its most compact form. If you need your MP9/TP9 to keep pace with other ultra-modern SMGs, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will do the trick!

If your MP9 or TP9 is due a style up, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will add a touch of modernity to your beastly SMG! This stock adapter is constructed from CNC machined aluminium and allows cutting-edge 1913/20mm interface stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913/20mm interface allows you to swap your stock in seconds whenever you feel like it or even ditch the stock entirely to run your MP9 in its most compact form. If you need your MP9/TP9 to keep pace with other ultra-modern SMGs, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will do the trick!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

If you're building a Navy Seal style SMG-7 and need to mount a suppressor, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB will sort you out! This thread adapter is constructed from steel, mounting to 12mm CCW male barrel threads and providing common 14mm CCW male barrel threads for mounting suppressors, tracer units and other muzzle devices. 

Compatibility-wise, this adapter is designed specifically for Tokyo Marui's SMG-7/PM7A1 GBB SMG and the WE SMG-7 & SMG-8 GBB. If you run one of these slick little subguns and fancy a change from the standard flash hider up front, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB is what you need!

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

If your Scorpion EVO stock has developed a bit of wobble or you fancy an ergonomic upgrade, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 will take your EVO to the cutting edge! This stock adapter is constructed from CNC-machined aluminium and allows 1913/20mm Picatinny compatible stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913 interface allows you to swap your stock in seconds whenever you feel like it, giving your EVO extra flexibility to meet the requirements of the mission at hand. If you fancy an aesthetic change for your EVO with loads of functional benefits, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 is ideal for your build!