KRYTAC Airsoft

A Polymer constructed Mid-Cap Magazine from KRYTAC which holds a total of 150rnds and is built to the usual high standard that you would expect of a KRYTAC product.

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

A Three Pack of Medium Capacity Magazines designed exclusively for the Airsoft Krytac Kriss Vector AEG, created by KRYTAC and officially licensed by KRISS.

Introducing the Kriss Vector, one of the most iconic submachine gun designs of recent years. The Vector has made itself known in many video games and thanks to Krytac, we now have a world-beating AEG replica version of this innovative real steel platform!

Boasting pre-upgraded Krytac internals with their in-line MOSFET to keep everything in check, the Krytac Vector is the ultimate replica of the Kriss Vector, complete with ambidextrous controls, 2 round burst mode and a high quality fibre reinforced polymer body with steel and alloy parts where needed to maintain strength. If you want a modern SMG with an iconic yet ultra-modern aesthetic you cannot beat the Krytac Kriss Vector! 

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

If you have had a mishap with your bevel gear, this KRYTAC replacement part should sort it! The KRYTAC Bevel Gear Assembly for V2/3 AEG Gearbox is constructed from hardened steel and is compatible with any AEG which uses a V2 or V3 gearbox. The hardened steel construction makes this bevel gear perfect to pair with an upgraded motor to guarantee long-term performance.

If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

If your tappet plate has broken due to some high rate of fire shenanigans, here is what you need to fix her up! The KRYTAC Tappet Plate for Version 2 Gearbox is a replacement original part, designed for the Krytac Trident AEG series but should be compatible with almost every Version 2 gearbox on the market. The set includes the tappet plate only and does not come with a nozzle or tappet plate spring. 

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

Designed with quality and functionality in mind to produce rifles to a quality never seen before. The Trident SPR is a Long barreled AEG rifle, ideally suited to long-range shooting and outdoors skirmishes, and is constructed from Alloy with a polymer pistol grip and stock, just like a real AR15 rifle!

If you are looking for an upgraded motor for improved trigger response, or something capable of pulling heavier springs, this will do the trick! This motor from Krytac is a high performance motor setup with a steel pinion gear pre-installed.

The motor is available in either the 20K performance or 30K high torque versions, giving you an option for any build and one for high performance DMR platforms, depending on your build objectives. The motor comes with connections for spade connectors and includes the motor height spring. This motor is a long shaft type, which fits M4/AR15 AEGs and SMG-5 replicas, but not the PDW or K models.

A gorgeous and well constructed Mock Suppressor for Airsoft Guns which have a 14mm CCW Thread. It features trademarks from KRISS USA and comes included with a threaded spacer with O-Ring for the perfect fit.

A gorgeous and well constructed Mock Suppressor for Airsoft Guns which have a 14mm CCW Thread. It features trademarks from KRISS USA and comes included with a threaded spacer with O-Ring for the perfect fit.

If you're building a gearbox from scratch or have some repairs to carry out, the KRYTAC Air Nozzle w/ O-Ring for M4/AR-15 AEG is a handy spare to have around just in case. This nozzle is the same used in the KRYTAC Trident and REC7 range, constructed from polymer with an inner O-ring to enhance air seal qualities. Compatibility-wise, this nozzle is designed for version 2 gearbox-equipped M4/AR-15 AEGs and has an overall length of 21.15mm. 

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

The KRYTAC Barrett REC7 series are the latest from KRYTAC, offering the Nautilus Gearbox crammed full of goodies, as well as a MOSFET, Rotary HOP Unit and a very solid and licensed design in collaboration with Barrett. If you're looking for out of the box performance, this should be high on your list.

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

If you love cutting-edge, unconventional platforms, the KRISS® Vector must be on your list! This, the KRYTAC KRISS® Vector V2 AEG is the latest Vector AEG, equipped with refined internals with the same phenomenal build quality as the original. More details are coming in due course but check out the "Full Description" to learn more!

*Note that this platform is not provided with the optic shown in the example images

If you love cutting-edge, unconventional platforms, the KRISS® Vector must be on your list! This, the KRYTAC KRISS® Vector V2 AEG is the latest Vector AEG, equipped with refined internals with the same phenomenal build quality as the original. More details are coming in due course but check out the "Full Description" to learn more!

*Note that this platform is not provided with the optic shown in the example images

A replacement original KRYTAC part which fits version 2, 3, 6 and 7 gearboxes. This cylinder is a Type 1, meaning it has a port in the side intended to reduce the air volume for use on short barrelled platforms (<363mm inner barrel) and prevent the "suck back" phenomenon.

If you have worn out your trigger or you're looking for a milspec trigger to replace a speedyboi flat trigger, this should do the trick! The Krytac Trident Trigger for M4/AR-15 AEG is constructed from alloy and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1 as well as practically any other M4/AR-15 used in military service in the real world.

The trigger is designed for the version 2 gearbox found in the vast majority of M4/AR-15 AEGs, meaning this trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened up to install it. 

If you have stripped your piston and need a replacement, here ya go! The KRYTAC Piston & Piston Head Assembly V2 for M4/AR-15 AEG is a replacement original parts set including a polymer piston with a 4-tooth steel rack and a polymer piston head with pre-installed O-ring. The set is designed for the Krytac Trident AEG series but is compatible with M4/AR-15 AEGs equipped with a version 2 gearbox. 

If you're after a compact AR platform with phenomenal build quality, the KRYTAC Trident MK3 CRB-M AEG is about as good as they get! The latest in a long line of KRYTAC Trident AEGs, the CRB-M MK3 has been externally updated with even more aggressive styling and its proven internals have been revamped for even more performance!