Griffin Armament

If you're looking for a stylish muzzle device which can mount to multiple platforms, the PTS Syndicate Griffin Armament® QD Blast Shield Gen 2 should suit! This Blast Shield is made from CNC machined 6061 aluminium and is licenced by Griffin Armament®, meaning flawless dimensional accuracy and full compatibility with PTS's range of Griffin Armament M4SD muzzle devices.

One of the neat tricks the QD Blast Shield has up its sleeve is the ability to mount to most A2 birdcage style flash hiders, meaning if you don't have a PTS Griffin Armament flash hider there is a high likelihood this will fit your original flash hider. Please note, as tolerances can differ between manufacturers, we cannot guarantee compatibility with all A2 birdcage flash hiders. 

The QD Blast Shield mounts via its Gate-LOK™ QD mechanism, requiring the circular leaf spring at the base of the suppressor to be pulled away from the collar and the QD mech lifted up and out of the device, allowing it to slip over your flash hider and be locked into place. We suggest proceeding with care when installing this device on non-PTS Griffin muzzle devices as you may damage its flawless finish! 

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR. 

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement. 

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health. 

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (General Purpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point. 

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

If you need a lightweight suppressor or tracer unit with licenced trademarks to complete your build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit is a fantastic choice. This is the direct thread version, pre-fitted with a 14mm CCW male thread insert for most Airsoft AEG/GBBR platforms and packaged with an 18mm CCW male thread insert for more unconventional platforms. 

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement. 

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health. 

One of the main perks of the Direct Thread mounted version of the Resistance 22M is its low weight, tipping the scales at under 160g for the tracer version. Coupled with its short overall length, this means you can rock the sneaky look without making your primary overly front-heavy or unwieldy. If you like your licenced goodies and need a sleek suppressor to finish off your latest build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit should keep you happy!