Airsoft Outer Barrel and Parts

A 12mm to 14mm CCW thread adapter which will allow you to attach suppressors to your Raven only series gas blowback pistol.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB01, MB05 and MB06 spring-powered Airsoft sniper rifles

If you are working on your CQB build you must be looking for the shortest barrel out there, and right now, this is it! The 5KU 7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel too! 

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

This outer barrel is a replacement original part for the Army Armament R601 JW3 GBB pistol but should also be compatible with other Army Armament Hi-capas and 1911 GBB pistols. The barrel is constructed from alloy and comes with 12mm CW female threads at the tip, leaving options open for adding a tracer unit or suppressor using a 14mm CCW male thread adapter (available separately). The barrel may also be suitable for other Hi-capa and 1911 pistols based on the original TM design but may require modifications to be made for smooth function.

The barrel is finished in bronze and has authentic looking mock locking lugs across its upper surface, with "9x19" marked on the chamber area in recessed lettering. The barrel has a standard flared profile which tapers towards the chamber, matching the more common real steel Hi-capa barrels perfectly.

An adaptor which converts the 18mm thread on the Airsoft Scorpion Evo to a 14mm Counter Clockwise (CCW) Thread

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-03 spring-powered Airsoft sniper rifles.

If you're looking for a new outer barrel to change up the length of your M4/AR-15 AEG, the 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 10.3-inch outer barrel is styled to match the profile of real 10.3" CQBR barrels and includes pin holes for mounting an M4/AR-15 front sight/gas block at the "carbine length" position. 

The 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're shortening your barrel to a more CQB-friendly size or giving it a bit more length for more long-range effect, the 5KU 10.3" Aluminium Outer Barrel belongs on your M4 AEG!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

Want a suppressor on your MB series rifle? This is what you'll need. Made from Robust alloy and finished in matt black, this suppressor adaptor will allow you to add any 14mm CCW threaded accessory to your WELL MB series sniper rifle.

A Steel constructed thread adapter for the AGM 002 series Spring-Powered Sniper Rifle, giving you a 14mm CCW Thread at the end of your barrel for the installation of standard Airsoft Suppressors with a matching thread. This is the perfect addition to anyone who wants to add a tactical look to their AGM 002, or conceal an extended inner barrel with a Suppressor.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-02 spring-powered Airsoft sniper rifles

If you are working on your CQB build you must be looking for an extremely short outer barrel, and this one certainly is that! The 5KU 8.7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 Airsoft rifle to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel to match!

If you are building an M4 from the ground up or you want a new look for your M4/AR15 platform this 5KU Aluminium outer barrel is worth a look! This barrel is 14.5 inches in length, just like the standard carbine length M4 barrel but has a heavier profile towards the tip to simulate real-world heavy barrels which allow for more sustained fire before accuracy takes a dive due to heat build-up.

The barrel is constructed from two parts, the barrel itself and the barrel base which are secured together using a pair of steel grub screws. At the tip we have the Airsoft standard 14mm CCW male threading, leaving you with a wealth of options for what muzzle device you choose to mount. The profile of the barrel matches real M4 barrels throughout its length, making this a great choice as a replacement for those who don't like seeing what is clearly a skinny Airsoft barrel through the ports on their handguard. This barrel is designed for M4/AR15 AEGs and should fit the vast majority of them.

An adaptor for a Well MB sniper rifle, giving it a 14mm CCW thread for the attachment of muzzle devices.

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

This VFC 4" Barrel Extension will sit on the end of your current 14mm outer barrel and provide 4" of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get your muzzle device to sit perfectly on the end of your platform. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors on platforms which you previously couldn't.

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If you want to mount a suppressor or tracer unit to your CYMA CM.702 series sniper rifle, this is the adapter you need! Constructed from steel and designed to mount to the CM.702's 20x1mm female barrel threading, the CYMA 14mm CCW Thread Adapter for CM.702 Series Sniper Rifles provides a 14mm CCW male thread at the tip, ready for the most common Airsoft tracer units and suppressors.