PJ Airsoft

If you're looking for a low-profile, extremely comfortable lower face mask to protect your teeth, then this is the mask for you. A solid mesh mouth piece, combined with 2 padded wings to protect your cheeks, held in place by an anti-slip strap.

If you're looking for a low-profile, extremely comfortable lower face mask to protect your teeth, then this is the mask for you. A solid mesh mouth piece, combined with 2 padded wings to protect your cheeks, held in place by an anti-slip strap.

If you're looking for a low-profile, extremely comfortable lower face mask to protect your teeth, then this is the mask for you. A solid mesh mouth piece, combined with 2 padded wings to protect your cheeks, held in place by an anti-slip strap.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

If you are fed up with thorns, BBs and other debris hindering your crawling advances, a set of knee and elbow pads should sort that out! The PJ Knee and Elbow Pad Set is an affordable replica of a popular real steel tactical pad set constructed from water-resistant Oxford fabric with foam padding inside and a flexible polymer shell on the front. 

The set includes a pair of knee pads and a pair of elbow pads, both of which are fully adjustable via a combination of elastic and velcro. These pads even have quick-release hooks on each strap, meaning you don't have to readjust the pads to the perfect tightness each time you put them on!

If you are fed up with thorns, BBs and other debris hindering your crawling advances, a set of knee and elbow pads should sort that out! The PJ Knee and Elbow Pad Set is an affordable replica of a popular real steel tactical pad set constructed from water-resistant Oxford fabric with foam padding inside and a flexible polymer shell on the front. 

The set includes a pair of knee pads and a pair of elbow pads, both of which are fully adjustable via a combination of elastic and velcro. These pads even have quick-release hooks on each strap, meaning you don't have to readjust the pads to the perfect tightness each time you put them on!

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

If your rifle is fed up with sharing space in its bag with your pistol, PJ has the solution! The Pistol Carry Bag; 35cm is  a handy compact carry case with an internal pistol pocket and 6 elastic loops for magazines.

This is a pack of twenty Glowsticks/Chemlights, that includes four of each colour, including Red, Orange, Yellow, Green and Blue.

If your rifle is fed up with sharing space in its bag with your pistol, PJ has the solution! Introducing the 28cm Pistol Carry Bag, a handy compact carry case with a zip closed internal pistol pocket, and 5 elastic loops for magazines. 

If your rifle is fed up with sharing space in its bag with your pistol, PJ has the solution! Introducing the 28cm Pistol Carry Bag, a handy compact carry case with a zip closed internal pistol pocket, and 5 elastic loops for magazines. 

If your rifle is fed up with sharing space in its bag with your pistol, PJ has the solution! Introducing the 28cm Pistol Carry Bag, a handy compact carry case with a zip closed internal pistol pocket, and 5 elastic loops for magazines. 

If you like to shoot a lot you will need an affordable source of BBs to keep the bank balance healthy! The PJ PROSLICK 0.20g 6mm BBs are provided in a resealable bag which holds approximately 4000BBs, complete with a resealable easy pour opening to minimise spillages. With tight tolerances of +/- 0.01mm and a polished surface for smooth feeding, these BBs are a great value alternative with no compromises when it comes to in game performance!

A set of goggles which offer an amazing field of view (as the name suggests), as well as a replaceable frame, adjustable strap and low cost. These goggles are rated EN166 which is NOT suitable alone for Airsoft skirmishing. For target shooting or dressing up a helmet, these are ideal, but we do not recommend using them as eye protection for skirmishes. 

If you're looking for a low-profile, extremely comfortable lower face mask to protect your teeth, then this is the mask for you. A solid mesh mouth piece, combined with 2 padded wings to protect your cheeks, held in place by an anti-slip strap.

If you like to shoot a lot you will need a big bag of BBs to stay supplied! The PJ PROSLICK 0.25g BBs are provided in a 1KG bulk bag which holds approximately 4000BBs, complete with a resealable easy pour opening to minimise spillages. With tight tolerances of +/- 0.01mm and a polished surface for smooth feeding, these BBs are a great value alternative with no compromises when it comes to in game performance!

If you need heavy BBs for your Airsoft Sniper rifle the PJ PROSLICK 0.40g 6mm BBs are certainly worth a look! These BBs are supplied in a resealable bag of 1000 BBs and are black in colour so the enemy cannot track your BBs back to where you shot from.

The external surface of these BBs is polished to a high sheen, making them great for platforms which demand the best accuracy and consistency possible. When it comes to tolerances, these BBs easily meet the mark set by other manufacturers, guaranteeing each BB will be 5.95mm +/- 0.01mm at maximum. If you are used to buying high grade sniper weight BBs, check the price! At that rate, they are definitely worth a try whether you have stacks of cash or you are a money-conscious marksman!

If you like to plink in the garden but don't like piles of white plastic on the lawn, these BBs are what you need! The 0.20g BIOTAC BBs from PJ are made from biodegradable material so they won't stick around for long after they've been shot. These BBs are also green in colour so they won't run the aesthetics of your well-kept garden and the enemy team won't be able to track your position as easily in a skirmish environment. 

The BIOTAC BBs are packaged in resealable bags of 2000 rounds, and being 0.20g in weight, are ideal for close to medium-range target shooting and skirmishing in stock AEGs, shotguns and pistols. 

If you're looking for affordable BBs with no quality compromise, PJ has your back! The PROSLICK BB line offers high-quality polished BBs designed for precision barrels with the tight tolerances necessary to make every shot count. Supplied in a 2000-round resealable bag, these 0.25g 6mm Airsoft BBs are well suited to almost any Airsoft gun out there, from pistols to AEGs and shotguns. 

If you are fed up with thorns, BBs and other debris hindering your crawling advances, a set of knee and elbow pads should sort that out! The PJ Knee and Elbow Pad Set is an affordable replica of a popular real steel tactical pad set constructed from water-resistant Oxford fabric with foam padding inside and a flexible polymer shell on the front. 

The set includes a pair of knee pads and a pair of elbow pads, both of which are fully adjustable via a combination of elastic and velcro. These pads even have quick-release hooks on each strap, meaning you don't have to readjust the pads to the perfect tightness each time you put them on!

If you need heavy BBs for your Airsoft Sniper rifle the PJ PROSLICK 0.36g 6mm BBs are certainly worth a look! These BBs are supplied in a resealable bag of 1000 BBs and are black so the enemy cannot track your BBs back to where you shot from.

The external surface of these BBs is polished to a high sheen, making them excellent for platforms which demand the absolute best accuracy and consistency available. When it comes to tolerances, these PROSLICK BBs easily meet the mark set by other manufacturers, guaranteeing each BB will be 5.95mm +/- 0.01mm at maximum. If you are used to buying high-grade sniper-weight BBs, check the price! At that rate, they are definitely worth trying whether you have stacks of cash or you are sniping on a budget!

If you run mid or low-cap AEG magazines having one of these in your kit list is essential! The 100rnd BB Speed Loader from PJ is a standard thumb plunger style speed loader which is sized to fit nicely in pistol magazine pouches, trouser pockets or utility pouches. The loader is constructed from translucent polymer so you can keep track of how full it is and also includes an adapter for GBB pistols and GBB rifles which slips over the loading port and holds the follower down for easier filling.

To fill the loader you will need to open up the fill window at the top of the loader (the opposite end to the loading port) and pour your BBs in. The thumb plunger is stored inside the loader for transportation to keep it compact and can be released by pressing the button on the side. With the loading port indexed with the fill/feed port on your mid or low-cap AEG magazine, you can fill the mag up by pressing the thumb plunger repeatedly until it becomes too hard to press. Stowing the plunger again is as simple as pressing it all the way down and pushing the retaining button at the top to lock the plunger back down.

If you run mid-caps you will want at least one of these to hand for fast magazine refills between games!