Airsoft Cylinder Heads

Upgrade your M4/M16 AEG. with an FPS Softair Tune Up Kit and increase its reliability and performance. The high-quality O-Rings ensure that it eliminates air leak and gives you perfect air seal for maximum efficiency and power. Constructed from Ergal (Aluminium 7075), the cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder head is made for use with version 2 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 300mm.

This tune-up kit includes:

• Cylinder (CLTC)
• Cylinder Head (TC02E)
• Air Nozzle with O-Ring for M4/M16 (SPM4E)
• Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN)

If you're building a beast of a gearbox, the Lonex Aluminium Cylinder Head for V2/3 Gearbox belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to close the gap between the cylinder and head for maximum air efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for a longer lifespan. If you're upgrading your V2 or V3 gearbox or working on a scratch build, the Lonex Aluminium Cylinder Head for V2/3 Gearbox is a fantastic choice!

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for version 2 gearbox variants of M4, M16, SR16, MP5, MC51, G3, M249 and LR300 and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable AK47, AK74, KURZ / PDW, SIG, GALIL or any version 3 gearbox AEG and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

An AEG cylinder head for version 2 gearboxes found in M4/AR15 AEGs and SMG-5 AEGs. This KRYTAC part features a dampening pad, intended to reduce the noise from the piston impacting the cylinder head and give you a smoother sounding gearbox. The cylinder head is constructed from high density polymer with a brass inner nozzle and a rubber dampening pad.

If you're after a high-performance build, then the GATE EON PROTECTOR Cylinder Head belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to seal the gap between the cylinder and head for maximum air retention and efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for an increased AEG lifespan. If you're upgrading your V2 or V3 gearbox or building a masterpiece from the ground up, the GATE EON PROTECTOR Cylinder Head is a superb choice!

If you're working on a long-barreled AR36 AEG build, whether it's a DMR or an MG36 LMG, the FPS Softair Full Tune Up Kit for AR36 AEGs is the ideal addition to your build. This kit includes replacements for the full cylinder group, enhancing air seal, and improving longevity and overall efficiency.

The kit is optimised for inner barrels of 451-550mm in length and includes a Type F CNC Steel Cylinder, ERGAL Nozzle with O-ring, CNC Aluminium cylinder head and a CNC ERGAL Double O-ring ball-bearing advanced piston head. If you're looking for maximum efficiency and strength from your long-barreled AR36 build, you need this kit!

If you need a new cylinder head to fix up your Dragunov, check this out! The CYMA Aluminium Cylinder Head for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and is fitted with two O-rings to seal any gaps between it and the cylinder for perfect efficiency and minimal air loss. 

The cylinder head also has a sound dampening pad installed on the rear face which reduces gearbox noise and protects the piston head from the force of repeated impacts. A replacement original part for the CYMA CM.057 SVD/SVU series, this cylinder head is also compatible with the old Real Sword Dragunov SVD!

Upgrade your M4/M16 AEG. with an FPS Softair Tune Up Kit and increase its reliability and performance. The high-quality O-Rings ensure that it eliminates air leak and gives you perfect air seal for maximum efficiency and power. Constructed from Ergal (Aluminium 7075), the cylinder head has high strength and is resistant to fatigue and is made for use with version 2 gearboxes, compatible with Tokyo Marui derived designs.

This tune-up kit includes:

• Cylinder Head (TC02E)
• Air Nozzle with O-Ring for M4/M16 (SPM4E)
• Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN)

This product increases the performance of your AEG.

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for Tokyo Marui NGRS or version 9 gearbox. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

If you're running an M4 AEG and seeking a cylinder head upgrade, the SHS V2 Cylinder Head for M4/AR-15 AEGs is a fantastic affordable option. Equipped with two O-rings around is circumference to close any gaps between your cylinder and the head, this cylinder head is compatible with any version 2 gearbox equipped M4 AEG.

The cylinder head body is constructed from CNC-machined aluminium and features a rubber dampening pad on the rear designed to reduce gearbox noise by cushioning the impacts of your piston head. If you're looking to enhance air seal or build a version 2 gearbox from scratch, the SHS V2 Cylinder Head for M4/AR-15 AEGs will suit you perfectly!

Building a beast of a gearbox? The Gate Protector CNC Aluminium Cylinder head guarantees a fantastic air seal thanks to its double o ring configuration. The Protector cylinder head is constructed from CNC machined aluminium and includes two rubber buffers of differing hardness, one of which can be installed on the rear of the cylinder head to reduce the impact force on the front of the gearbox shell and prolong its life. This cylinder head is best suited for standard builds or high performance DMR style builds and has super tight tolerances making fitting a breeze while reducing friction between parts which can result in premature failure.