Airsoft Gas / CO2 Magazines

If your 1911 Pistol had an underwhelming performance in the cold weather, you need a CO2 magazine and the performance will be much better! CO2 is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past! Also remember that CO2 does not contain any lubricant of its' own, and so you will need to lubricate your Pistol regularly using a Silicon Lubricant, such as: Abbey Silicone Gun Oil 35 Spray.

Just remember that the laws of physics still apply, and if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol. Please ensure that all CO2 has been used in the Magazine before attempting to remove the Bulb, as it could still be under pressure. Excess CO2 is best used by firing the Pistol, rather than pressing the knocker valve on the back of the Magazine.

Keep your 1911 performing well no matter the weather with the WE 15rnd CO2 Magazine for 1911 GBB Pistols, come rain or snow your 1911 will still be able to complete the mission.

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

ASG MK23 Socom magazines are currently readily available at an affordable price. Delivering great gas efficiency too; on a good day expect up to three if not more full magazines worth of shots from one charge of gas.

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

Looking for spare magazines for the VORSK VMP-1? You have found them! These magazines are constructed from alloy with a steel feed spring and brass valves and hold 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 SMG. 

A 25 Round Green Gas Powered Magazine designed for the Airsoft GLOCK 17 Gen4 by UMAREX. This magazine works with the Umarex/VFC Glock 17 GBB and is also compatible with the KRYTAC Maxim 9 GBB but is not compatible with 4.5mm Air pistols. 

A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.

A spare Gas magazine for the Army Armament R501 Gas Blowback Airsoft Pistol, which holds a total of 30 BBs and is the perfect way to spend more time in the field playing, and less time in the safe zone reloading. The magazine features a custom Polymer Baseplate which is easily slid to the side to access the inlet valve. 

A 25 Round Green Gas Powered Magazine designed for the GLOCK 17 Gen5 by UMAREX.

A green gas pistol magazine designed for use with the NUPROL RAVEN Range of MEU and 1911 GBB Pistols. This magazine is constructed from alloy with polymer feed lips, and has a 22 round capacity. 

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A Gas Blowback Magazine designed for the WE Europe EU-Series Pistol Range, designed to allow the user to carry more rounds than standard Airsoft Pistols, giving the user a tactical edge in the field. 

A 25 Round CO2 Powered Magazine designed for the GLOCK 17 Gen4 by UMAREX.

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

A gas blowback Airsoft CO2 magazine developed by VORSK for their EU/G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 48 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK EU/G-Series pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

A magazine designed for use in the WE Europe's EU-Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds.