CYMA PDW Stock for M4/AR-15 AEG

CYMA
Code: FBP4038
589.00 kr.
  • 6 Positions of adjustment
  • Steel/alloy/polymer construction
  • Great for CQB or Honey Badger style builds

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

Full description

Description

If you are putting together a CQB-optimised M4/AR-15 build a PDW stock can be one of the best ways to trim down the overall length without sacrificing barrel length. The CYMA PDW Stock for M4/AR-15 AEG is designed to fit the stock mounting interface found beneath the buffer tube on most M4/AR-15 AEG rifles, though some will need this part trimming down to fit.

The stock is constructed from a mix of steel, alloy and polymer, with the butt plate being polymer, the stock bars and adjustment/locking lever being steel and the buffer tube being alloy. This keeps the important parts strong and well up to a lifespan of hard use as well as providing a realistic weight and feel for whatever M4/AR-15 AEG it is mounted to.

The stock adjustment/locking lever is located on the bottom of the buffer tube and pushing it towards the centre will release the stock, allowing it to be pulled out into one of six positions of adjustment. There is also a secondary lever on the left side, which when pressed together with the right side allows the butt plate and stock bars to be removed entirely for easier access to the battery compartment.

As far as battery space is concerned, there is very little room inside so if you run a rear-wired M4/AR-15 AEG we recommend using the CYMA Battery Extension Tube for PDW stock so you can fit a standard M4/AR-15 buffer tube type stick battery and not need to worry about sourcing a tiny battery and delicately installing it each time. The rear cap of the buffer tube can be unscrewed to allow a battery to be installed or to add the battery extension tube.

Whether you are building your own version of the highly sought-after Honey Badger PDW or you are working on an ARP9 killer of a CQB build, a PDW stock is an essential bit of kit. The CYMA PDW Stock for M4/AR-15 AEG is one of the best out there, marrying slick PDW looks with rock-solid construction with more than its fair share of steel parts.

Features

  • 6 Positions of adjustment
  • Super short overall length - Great for CQB/Honey Badger builds
  • Steel stock bars and locking lever - Nice and strong
  • Alloy buffer tube - Internal battery compartment for PDW stick batteries (600mAh maximum)
  • Battery Extension tube available here - Provides enough space for standard M4 stick batteries
  • High density polymer butt plate with linear texture - Grips to your shoulder well even with body armour
  • Compatible with M4/AR-15 AEG assault rifles

Package Includes

  • CYMA PDW Stock for M4/AR-15 AEG

Special Instructions

This stock will directly mount to the CM.097 series of AEGs but may require that the stock mounting interface is trimmed down for installation onto certain M4/AR-15 platforms.

The battery compartment inside the CYMA PDW stock is very, very small and may just about fit PDW-type stick batteries (600mAh maximum). We recommend using this stock for front-wired AEGs or those with a battery sling setup, or using the CYMA Battery Extension Tube so you can use standard M4/AR-15 stick batteries.

Specification

General

Parts & Accessories Type
External Parts
External Part Type
Stock
Package Includes
Stock
Patrol Base - Warning Icon
Warnings
Patrol Base - Warning Icon
Parts Fitting

Construction

Colour Wheel Greyscale
Item Colour
Black
Construction Icon
Construction
Steel stock bars, locking lever and receiver end plate. Alloy buffer tube. Polymer butt plate.

Weight and Dimension

Product Height
Approx. 11.5cm
Product Length
Approx. 2.2cm
Product Width
Approx. 5.5cm
Weight KG Icon
Weight (KG)
Approx. 0.403kg

Part Specific

Weapon Platform
Assault Rifle, M4 / AR-15 / M16, M4/AR-15 AEG, AR,

Mount Specific

Sling Mount Specific

Sling Plate Icon
Sling Options
None