EU Warehouse Stock

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

If you are in the market for a new SMG and you want something that stands out, the S&T UST9 has its own unique look and the performance to back it up! The UST9 is built exactly like the real thing; with a high-density polymer body, metal outer barrel and steel body pins to keep everything firmly together while allowing for quick disassembly. This results in a lightweight and strong platform which does not compromise on realism!

S&T has also added some thoughtful pre-upgraded parts to the UST9 formula; offering a 6.05mm tightbore inner barrel to improve accuracy with less risk of a jam than tighter bores, a pre-installed MOSFET to improve trigger response and rate of fire and a quick change spring system for easy power tuning without needing to open the gearbox shell. If you want an SMG that is realistically built and not an SMG-5 or SMG-7, the UST9 should do the trick!

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

If you are shopping for Airsoft headwear but want to remain agile and unburdened, this helmet should fit the bill! The 8Fields Tactical MICH 2001 High Cut Helmet Replica; Ultra Light Version gives you the aggressive tactical styling of a ballistic helmet but is nice and light, tipping the scales at a minor 0.660 kg despite being kitted out with ARC accessory rails and an NVG mount bracket. 

This helmet replicates the real steel MICH 2001 High Cut helmet, allowing compatibility with communication headsets and improved airflow to the neck and sides of the head. Being a replica, this helmet is just for looks and doesn't provide any ballistic or impact protection, but is fully adjustable via an adjustable suspension and reconfigurable internal foam padding. If you need a helmet to complete your loadout but don't want to compromise your in game agility, the 8Fields Tactical MICH 2001 is a fine choice!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher: heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 12 Inch full-sized variant, ideally suited to mounting to an M16 or M4A1 with a 14.5 inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included adaptor.

If you are looking for a starting point for a Milsim appropriate DMR rifle, you have found one of the best options! The Double Bell MK12 MOD.0 SPR is modelled closely on the real MK12 MOD.0 Special Purpose Rifle issued to the special operations forces of both the US Army and US Navy. This rifle features an 18-inch outer barrel with an OPS Inc. style muzzle brake, a PRI Gen2 style free-floated tubular handguard with removable rail sections and an ARMs style "Swan" rail riser sleeve, making it a perfect match for DMR rifles issued to USSOCOM during the global war on terror era.

Is your replica FAST helmet too shiny, like a bald mans head? Don't fancy painting it? The FMA maritime helmet cover solves this issue whilst providing excellent function with its camo fabric and extra loops for foliage if you want to truly disappear in the woods. 

A 20L Capacity Rucksack / Backpack for Airsoft, Hiking and other Outdoor Activities, which is made from a tough and durable 1000D Polyester Material with Water Resistant properties and stiffened walls to retain its' shape. With external MOLLE Loops, Hook & Loop Panels and Compression Straps, there's not much this Backpack can't do.

A 1000D Polyester constructed pouch for Shotgun Shells which holds a total of eight shells, and is mounted to your arm so that your spare shells are always within quick and easy reach for rapid reloads.

A 1000D Polyester constructed pouch for Shotgun Shells which holds a total of eight shells, and is mounted to your arm so that your spare shells are always within quick and easy reach for rapid reloads.

Additional storage solution to combine with the VX range from Viper Tactical. A large utility style pouch ideal for carrying essentials including maps, navigation equipment and other light supplies.

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

A foam padded case designed to carry up to two rifles. The case itself is constructed from 600D Polyester, with foam inside the Front and Back Panel to provide extra padding for weapons during transport. 

Silicone oil is absolutely essential to have in order to keep your gas magazines healthy and their seals and gas routes fresh. This bottle contains 50ml of liquid silicone lubricant which can be applied to O-rings and gas routes in your GBB and its magazines and can also be used to add lubricant to CO2-powered guns which have a tendency to dry out over long durations. For just a few quid you can save yourself countless Airsoft tokens on buying new magazines when the seals dry up, so what are you waiting for?

If you are fed up with drop leg holsters slowing you down, or belt-mounted holsters being hard to reach when prone, the Cytac Shoulder harness may be the solution to your woes! This harness provides a polymer mounting platform for any Amomax retention holster and an adjustable shoulder harness which allows practically any body type to wear this holster comfortably.

The Double Eagle M9XX range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an exceptional exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture. The M916G is equipped with an ergonomically designed M-LOK handguard which includes gripping surfaces, and provides a slick, snag-free AR15 design cast in high density polymer. This AEG also sports Double Eagle's highly advanced FALCON FCU, offering binary trigger, burst mode and other advanced features which can be programmed with the rifle's trigger and fire selector.

If you need a spare mag or two for your Double Eagle M401 shotgun, here you go! These magazines hold 18 BBs and are constructed from polymer, making them affordable and lightweight. Each mag is filled similarly to an AEG mid-cap or low-cap, through the fill/feed port at the top front of the mag body and a speedloader is recommended to make loading easier.

As with the original M401 mag, these mags have built-in magazine catch buttons on either side, making for quick and easy reloads thanks to the prominent buttons. Whether you run the M401 as a skirmish backup or just for some backyard fun, a spare mag is very handy to have to spend more time shooting and less time loading!

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

A moulded retention holster for EU-Series 19, 23 and 32 models which is designed for Left Handed players, and will hold your sidearm tight until you press the button to release it.

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Gen's Ace 7.4v 1200mAh 25C LiPo Stick Battery measures approximately 13x1x2cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Deans connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

If you're an AK fan but are looking for a submachine gun style Airsoft AEG we have a treat for you! The Arcturus PP-19-01 Vityaz AEG sports superb build quality with a large number of steel external parts, a pre-installed MOSFET for improved trigger response, a 6.01mm tight bore inner barrel and a new style of AK HOP-up chamber using a rotary style adjuster for precise tuning and greater projectile stability. For those looking for a CQB AEG with a Russian twist, or those AK fans who love the platform and want an AK of all sizes in their collection, the PP-19-01 Vityaz is calling your name!

A replica MK-13 Flashbang Grenade, with some assembly required out of the box!

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.