- Alloy slide, polymer frame
- Licenced by Taran Tactical Innovations
- MOSFET Pre-installed - Snappy!
If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!
As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.
Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Kestrel Basic MOSFET/ETU pre-installed
If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!
Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!
Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!
Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Kestrel Basic MOSFET/ETU pre-installed
If you're looking for a new CQB primary at the cutting edge of real steel rifle design, the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU should be right up your street! Based on the real steel DDM4 PDW, this compact M4/AR-15 platform boasts full metal construction, official licencing from Daniel Defense via EMG and CYMA's Platinum E-Edition internals, making it a world beater in every way!
Inside, you'll find a reinforced V2 gearbox equipped with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges despite the short overall length of the DDM4 PDW setup!
Improving on the previous DDM4 PDW AEG, this version is equipped with the EShooter Kestrel Basic ETU, offering programmable fire modes including 3-round burst, binary trigger and 6 levels of adjustable pre-cocking. This is a major improvement over the Zeus MOSFET of the original, not only enhancing reliability in the long term but giving you more exciting options and the ability to crank semi-auto response speed up to near GBBR levels!
Both internally and externally, the DDM4 PDW is at the top tier of Airsoft platforms, ideal for CQB players or aggressive playstyles outdoors. If you love licenced trademarks, a high quality metal build and plenty of attachment and customisation options in a compact, menacing form, you'll love the EMG Daniel Defense DDM4® PDW SBR AEG; Kestrel Basic ETU!
- Full metal construction
- Licenced by Daniel Defense
- Based on the TM ZET GBBR System
If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!
- Full metal construction
- Licenced by Daniel Defense
- Based on the TM ZET GBBR System
If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Licenced by Daniel Defense
If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!
Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer.
Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange.
Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!
- Full metal construction
- EShooter Kestrel Basic ETU/MOSFET
- Baba Yaga's primary in John Wick: Chapter 2
If you're a John Wick fan seeking an Airsoft gun which does the legendary Baba Yaga justice, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU is the one. This premium-tier AEG boasts full metal construction and CYMA's Platinum E-Edition internals, further refined in this latest version with the addition of the EShooter Kestrel V2 Basic MOSFET/ETU.
The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!
On the outside, we have a 14.5-inch smooth profile outer barrel with a TTI muzzle brake, a CNC machined aluminium KeyMod rail system, the uniquely designed Taran Tactical AR-15 receiver and flawless engraved and laser engraved TTI markings across the design, perfectly replicating the rifle used by the boogie man in John Wick: Chapter 2. If you want to shoot quick and slick like Wick, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU will equip you to do so!
- Full metal construction
- ZET System GBBR - TM compatible internals
- Ferocious recoil, realistic handling - Just awesome!
If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.
Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.
Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!
- Full metal construction
- ZET System GBBR - TM compatible internals
- Ferocious recoil, realistic handling - Just awesome!
If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.
Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.
Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!
- 230rnd Capacity, Pack of 6
- High density polymer construction
- For M4/AR-15, SCAR-L & 416 AEGs
If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!
These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility.
As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!
- Lancer Systems trademarks
- Advanced raised grip textures
- 190 round mid-cap
EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:
- '.300 BLACKOUT'
- 'L5-AWA'
- 30BLK
- LANCER SYSTEMS
- 20 / 30
The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.
- Lancer Systems trademarks
- Advanced raised grip textures
- 190 round mid-cap
EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:
- '.300 BLACKOUT'
- 'L5-AWA'
- 30BLK
- LANCER SYSTEMS
- 20 / 30
The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.
- Full metal construction
- TM ZET System clone - Made by CGS
- Licenced Daniel Defense trademarks from EMG
If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!
The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!
- Full metal construction
- TM ZET System clone - Made by CGS
- Licenced Daniel Defense trademarks from EMG
If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!
The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!
- Barrett Licensed
- Nautilus Gearbox
- Ambi. Fire Selector
This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.
- Barrett Licensed
- Nautilus Gearbox
- Ambi. Fire Selector
This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.
- Full metal construction
- MOSFET pre-installed
- Licenced by Salient Arms though EMG
If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire.
While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal!
- Licenced by EMG
- Full metal construction
- 6.03mm Tightbore inner barrel
If you like a slick, licenced Hi-Capa platform, the EMG STACCATO series should be right up your street! This, the R618 STACCATO 2011 Hi-Capa XC is based on the real steel STACCATO 2011 XC, boasting full metal construction, a pre-installed compensator and official licencing from STACCATO Firearms via EMG and 6mm Pro Shop. This, of course, means full trademarks across the design and unrivalled authenticity; perfect for realism fans!
On the inside, the STACCATO XC is based around the Tokyo Marui Hi-Capa internal system, which should mean most aftermarket upgrades will be compatible, potentially with some fitting required. As it comes, the XC is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If you're in search of a unique Hi-Capa with high-end styling and a respectable real steel pedigree, the EMG R618 STACCATO 2011 Hi-Capa XC belongs on your belt!
- 210rnd Capacity mid-cap
- High density polymer construction
- For M4/AR-15 AEGs and other AR compatible platforms
If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.
Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!
- Full metal construction
- STACCATO licensing and grip
- 6.03mm Tightbore inner barrel
If you have a Hi-Capa-shaped hole in your heart and are seeking a realistic experience, the EMG R611-3 STACCATO 2011 Hi-Capa P GBB is what you need. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 P, complete with licensed trademarks across the design in engraved, laser engraved and embossed form, very fancy.
As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!
Internally, the STACCATO P is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with premium styling and stand out from the crowd, the R611-3 STACCATO 2011 Hi-Capa P GBB from EMG belongs in your loadout!
- Full metal construction
- 6.03mm Tightbore & MOSFET
- Licenced by Daniel Defense via EMG
If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.
On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.
Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!
- Full metal construction
- Licenced by Daniel Defense via EMG
- MOSFET, tightbore barrel, E-Edition gearbox
If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!
This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.
Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!
- Full Licenced by FN Herstal
- Quick Change Spring System
- Krytac in-line MOSFET pre-installed
There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.
- Full metal construction
- Licenced by Noveske Rifleworks
- MOSFET Pre-installed
If you are the type of Airsofter who keeps up to date with the US real steel tactical community, you'll appreciate the EMG Noveske N4! Boasting full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination. To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long range performance, especially for such a compact platform.
This version is the 10.5" Shorty, making it the perfect length for any Airsoft scenario with performance that can challenge anything else on the skirmish site. Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing.
- Full metal construction
- Licensed CANiK trademarks
- 14mm CCW male threaded outer barrel
If you are having a tough time deciding between all the modern handgun designs out there, and you aren't sure whether to go for a PPQ, M&P or Glock, now you no longer need to decide! The CANiK TP9 is a very recent handgun designed in Turkey and manufactured in the USA which takes the things people love about other platforms and combines them to make one of the most ergonomically pleasing pistols we have ever handled. To sweeten the deal, the EMG TP9 Elite Combat comes with a 14mm CCW male threaded outer barrel, a magazine well flare and a 20mm Picatinny frame rail, meaning the TP9 is ready for any battlefield role you have in mind!
- Full metal construction
- Licensed CANiK trademarks
- 14mm CCW male threaded outer barrel
If you are having a tough time deciding between all the modern handgun designs out there, and you aren't sure whether to go for a PPQ, M&P or Glock, now you no longer need to decide! The CANiK TP9 is a very recent handgun designed in Turkey and manufactured in the USA which takes the things people love about other platforms and combines them to make one of the most ergonomically pleasing pistols we have ever handled. To sweeten the deal, the EMG TP9 Elite Combat comes with a 14mm CCW male threaded outer barrel, a magazine well flare and a 20mm Picatinny frame rail, meaning the TP9 is ready for any battlefield role you have in mind!
- Full metal construction
- Licensed by Spike's Tactical through EMG
- Mounts to 20mm Picatinny rails
If you need more firepower without extra length, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher is perfect for you. This launcher has been licensed by the real steel brand Spike's Tactical and is identical to the real steel product. It has a 12" rail mounting section so you can attach it to most common assault rifles which have a Picatinny under rail. To mount it, slide the launcher on your rail and open the loading action to screw in the Allen Key bolts.
This launcher has been seen in multiple movies, including John Wick 2 in its stand-alone version, which can be made with the EMG KAOS Conversion Kit For 12" HAVOC Grenade Launcher. Like other Airsoft launchers, the "HAVOC" 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, though specialised MOSCARTs that shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher will give you what you need!
- Full metal construction
- TM ZET System clone - Made by CGS
- Licenced Daniel Defense trademarks from EMG
If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!
- Full metal construction
- TM ZET System clone - Made by CGS
- Licenced Daniel Defense trademarks from EMG
If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!
- 190rnd Capacity
- Licenced by Lancer Systems via EMG
- Compatible with M4/AR-15 AEGs
EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:
- '5.56x45mm'
- 'L5-AWA'
- 30BLK
- LANCER SYSTEMS
- 20 / 30
The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!
About EMG Airsoft
EMG Airsoft, also known as Evike Manufacturing Group, is rapidly becoming one of the biggest names in producing high-quality licensed Airsoft equipment, focussing on both replicas and accessories.
EMG holds the license to produce replicas from Daniel Defense, Noveske, CANiK Firearms, Salient Arms, Seekins Precision, Archon Firearms, and many other iconic real steel designs, all of which are reproduced by EMG to an exceptional standard, complete with licensed trademarks, flawless build quality, and impressive performance.
This is achieved thanks to EMG's partnership with many existing high-end Airsoft manufacturers, guaranteeing that when you choose EMG not only will you get a flawless replica but also a skirmish dominator! If you want the perfect blend of realism and performance, equip yourself with EMG UK!