Warhead Industries

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're working on the ultimate AEG build, the Warhead Industries Ronin CNC Brushless Motor; Long Shaft should be on your shopping list! Outdoing even the legendary Warhead CNC Black brushless motors used by Bolster Armouries, the Ronin is the absolute pinnacle of AEG motor technology, boasting improved quality magnets, a titanium shaft assembly, hard-wired spade connectors and a weight-reduced rotor. 

"Ronin" means a wandering Samurai, a reference to the Warhead Industries stator winding master, a single expert with over 20 years of winding experience who hand winds each Ronin motor personally. While the CNC Black motor also has a hand-wound stator, this is done by regular line workers and while precise, cannot match up to the efficiency and quality of the expertly wound Ronin. 

If you want your AEG shooting at its absolute best and maintaining it in the long run, the Warhead Industries Ronin CNC Brushless Motor is essential. Naturally, such a high-performance motor will require expertise to run properly and other reinforced parts to keep up. If you're the techy type and require the best brushless motor on the market, this is it!

If you're working on the ultimate AEG build, the Warhead Industries Ronin CNC Brushless Motor; Long Shaft should be on your shopping list! Outdoing even the legendary Warhead CNC Black brushless motors used by Bolster Armouries, the Ronin is the absolute pinnacle of AEG motor technology, boasting improved quality magnets, a titanium shaft assembly, hard-wired spade connectors and a weight-reduced rotor. 

"Ronin" means a wandering Samurai, a reference to the Warhead Industries stator winding master, a single expert with over 20 years of winding experience who hand winds each Ronin motor personally. While the CNC Black motor also has a hand-wound stator, this is done by regular line workers and while precise, cannot match up to the efficiency and quality of the expertly wound Ronin. 

If you want your AEG shooting at its absolute best and maintaining it in the long run, the Warhead Industries Ronin CNC Brushless Motor is essential. Naturally, such a high-performance motor will require expertise to run properly and other reinforced parts to keep up. If you're the techy type and require the best brushless motor on the market, this is it!