Airsoft Submachine Gun Magazines

If you keep getting your SSR9 snagged on the battlefield, the shorter Novritsch SSR9 70rnd Magazine is perfect for you! It is constructed from high-density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The 70rnd magazine is quite a reduction from the 120rnd magazine that comes with the SSR9. However, this magazine's short design allows you to play closer to the ground and cover, allowing you to be less at risk of taking hits while delivering them to the enemy team!

The slim design of these magazines allows you to carry plenty, and it goes without saying that you'll need a lot of them to keep up with the SSR9 DSG's insane rate of fire!

If you're rocking the WELL PRO WE06-GM PPK-20 GBB SMG, these are what you need to keep the recoil thumping! The WELL PRO 38rnd Green Gas Magazine for WE06-GM PPK-20 GBB is constructed with an alloy shell and polymer feed lips, replicating the shape of the real steel PPK-20/PP-19-01 magazine flawlessly.

The mag can be loaded through the feed lips at the top using a speed loader or by hand, though this is much easier if you pull the follower on the front down to relieve spring pressure. The gas fill valve is concealed beneath the stamped steel baseplate; simply lift the bottom section of the follower up and slide the baseplate off to the rear to access the valve. This magazine also features a "Bolt stop" mechanism, giving you the "dead man's click" when your mag runs dry, just like the real PPK-20!

If you're rocking the stunning EMG Noveske "Space Invader" AEG, here's what you need to keep it well-fed! The EMG 210rnd Hi-Cap Magazine for Noveske "Space Invader" AEG is constructed with a steel shell and polymer internals, holding 210 BBs approximately. 

The mag can be filled through the fill window on top by opening the hatch and pouring your BBs in. With this done, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're ready to rock! Compatibility-wise, this mag is specifically for the EMG Noveske "Space Invader" AEG (OEM: APS) and is unlikely to work with other platforms. If your Space Invader is hungry for more firepower, grab a couple of these to keep it happy!

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds. 

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 120rnd Mid-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 120 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing perfectly.

This magazine is a mid-cap, meaning it holds a respectable 120 rounds and is ideal for those who hate the "battle rattle" of high-caps but want a higher capacity. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

A variable capacity magazine for the Arcturus PP-19-01, capable of holding your choice of 30 and 95 rounds. The mag is filled using a speed loader at the fill port at the top and if you want to adjust between capacities this is accomplished by pressing the lock button at the bottom and sliding the bottom plate off. Then after removing the interior from the outer casing there is a switch on the side and after pushing inwards and moving either left or right that will alternate between 30 and 95rnd capacity. This is the perfect purchase for anyone who owns an Arcturus brand PP-19 and wants a mag that can vary between playstyles depending on the skirmish at hand.

A multipack of magazine for the ASG Scorpion Evo. Built from tough Polymer these magazines are mid-capacity, meaning BBs can be loaded from the top using a speed loader and then require no winding. 

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

If you need to load up on magazines for your SMG-7 AEP, but you don't want the "battle rattle" from using high capacity magazines, you'll need a few of these! The 100rnd Mid-cap magazine for the well R4 is constructed with a steel upper shell and feed spring, and a polymer lower shell with polymer internals. The magazine includes "4.6x30" stamped markings on the left side of the shell and realistic reinforcement ribs along the sides of the upper shell. This magazine holds 100 6mm BBs and can be fed through the feed/fill port at the top of the magazine using a standard Airsoft speed loader. The magazine is designed for the Well R4 but should work in most SMG-7 AEPs. 

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines. 

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

If you need mags to keep your Grease Gun AEG in the game, these are the ones! The Snow Wolf 130rnd Mid-Cap Magazine for SW-06 M3A1 AEG is constructed with a steel shell, polymer internals and a steel feed spring, holding 130 BBs with no battle rattle or winding wheel to worry about! 

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Compatibility-wise, these mags are for the Snow Wolf M3 and M3A1 Grease Gun AEGs and are unlikely to work with other brands. Whether you run a WW2 loadout with a Grease Gun or a Desert Storm loadout with the same, these mags belong in your rig!

Are you the type of player that seeks every advantage to keep the enemy team subdued whilst skirmishing? Having fire superiority is one of the best ways to make the most of an SMG and an aggressive play style. The NUPROL 1200rnd Electric drum magazine is a superb addition to any SMG-5 loadout and can be an asset in gaining the volume of fire advantage when skirmishing, and can turn the SMG-5 into a highly mobile and manoeuvrable support weapon, able to keep pace with the assaulter and provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the SMG-5 styling, especially if it is railed up! This magazine is an autowinding design with a sound control function, which requires 3x AAA batteries to operate. 

If you're running one of the new Umarex BERETTA PMX SMGs, you'll need a few of these to keep the fun and kills coming! The 48rnd Green Gas Magazine is constructed from alloy and compatible with the Umarex BERETTA PMX. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

A 120 Round capacity Mid Cap Magazine for the UMAREX H&K MP7 AEG Airsoft Electric Gun.

A spare Mid cap magazine designed for the G&G ARP9 9mm Receiver styled Airsoft M4 replica. Shaped Similar to an extended G-series magazine but hold 60 rounds filled via a a speed loader on the top of the mag. once filled you are ready to go with no winding needed.

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

A Three Pack of Medium Capacity Magazines designed exclusively for the Airsoft Krytac Kriss Vector AEG, created by KRYTAC and officially licensed by KRISS.

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

If you're running your VMP-1 SMG as a backup, the VORSK 20rnd Short Gas Magazine for VMP-1/2 GBB is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol, this mag also makes it far more practical to carry your VMP-1 on your belt or leg!