Matrix

If you need a super-tiny battery for a PDW stock or other cramped battery compartment, check this out! The Matrix 7.4V 600mAh LiPo PDW Stick Battery (Deans) measures a mere 7.5cm x 1.25cm x 1.7cm approximately, with 10cm of wire length, pre-wired to a Deans/T-plug battery connector. 

Being super-duper small, this battery will fit neatly where others won't, including in L85 platforms wired to the pistol grip (A3 & AFV), M4/AR-15 platforms with PDW stocks and other tight battery compartments. 

Whether you're working on a milsim look or you're a Call of Duty fan, the Matrix Daniel Defense® MK18 Sports Line AEG; ETU Version should be in your sights! A lightweight, beginner-friendly build made predominantly from high-density polymer with an alloy outer barrel and trim parts, this MK18 build boasts official licensing from Daniel Defense via EMG, meaning we're treated to realistic trademarks across the design, ideal for realism nuts!

Inside, the Matrix MK18 is based around an alloy V2 gearbox with TM-compatible internal parts, providing plenty of upgrade options on the aftermarket. Inside the gearbox, we have 18:1 ratio steel gears running on 8mm bushings, a quick-change spring guide for easy power tuning and a 6.02mm tightbore inner barrel to enhance accuracy. The pre-installed Electronic Trigger Unit (ETU) boosts trigger response, prevents lockups and improves electrical efficiency, especially paired with the on-board low-resistance wiring!

Ready to be decked out with 20mm Picatinny accessories and a tracer unit or suppressor for the special forces look, the Matrix Daniel Defense® MK18 Sports Line AEG; ETU Version is a beast of a beginner build, ideal for those with a milsim leaning. If you want the MK18 look without spending big bucks, this is the best way to do it!

Whether you're working on a milsim look or you're a Call of Duty fan, the Matrix Daniel Defense® MK18 Sports Line AEG; ETU Version should be in your sights! A lightweight, beginner-friendly build made predominantly from high-density polymer with an alloy outer barrel and trim parts, this MK18 build boasts official licensing from Daniel Defense via EMG, meaning we're treated to realistic trademarks across the design, ideal for realism nuts!

Inside, the Matrix MK18 is based around an alloy V2 gearbox with TM-compatible internal parts, providing plenty of upgrade options on the aftermarket. Inside the gearbox, we have 18:1 ratio steel gears running on 8mm bushings, a quick-change spring guide for easy power tuning and a 6.02mm tightbore inner barrel to enhance accuracy. The pre-installed Electronic Trigger Unit (ETU) boosts trigger response, prevents lockups and improves electrical efficiency, especially paired with the on-board low-resistance wiring!

Ready to be decked out with 20mm Picatinny accessories and a tracer unit or suppressor for the special forces look, the Matrix Daniel Defense® MK18 Sports Line AEG; ETU Version is a beast of a beginner build, ideal for those with a milsim leaning. If you want the MK18 look without spending big bucks, this is the best way to do it!

The Matrix Shark 14mm CCW Flash Hider is a striking muzzle accessory designed for Airsoft rifles with 14mm counterclockwise threads. Built from steel, it offers a realistic weight and finish that complements tactical or custom rifle builds, making it ideal for display setups or aggressive styled loadouts.

Its distinctive spiked bezel gives your rifle a unique, intimidating front profile that stands out from standard flash hiders. Consult your site marshal before using it at a skirmish due to the sharp front design; consider your fellow Airsofters! Installation is simple with standard 14mm CCW threading, making it compatible with most Airsoft rifles using this common spec.

The Matrix 20mm Picatinny Railed Handguard for MP5/SMG-5 AEGs is a practical upgrade for players who want modern accessory compatibility on their MP5 platform. Designed for improved versatility, this handguard provides multiple 20mm rail sections for mounting grips, lights, lasers or other tactical attachments to suit your playstyle.

Constructed from high-strength polymer with metal accessory rails and an alloy outer barrel, it balances durability with manageable weight. It is compatible with many popular MP5/SMG-5 AEG variants, including TM, CYMA, G&G and Umarex, making it a strong choice for players upgrading or repairing their front-end setup.

If you are undecided about vertical grips and sometimes prefer the old-school ways, the Matrix Folding Vertical Grip for 20mm Picatinny Rails is a great choice! Constructed from high-density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rails via its spring-loaded QD mount.

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position.

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the Matrix Folding Vertical Grip is one to watch!

The Matrix 150rnd Mid-Cap Magazine for AK47/AKM AEGs is designed for most AK Platform variants and features a Mid-Cap design. It holds approximately 150 BBs and will feed all of them consecutively, no winding wheels here! It beautifully replicates the Steel Waffle mags that are often seen in the traditional AKM models. This magazine is a great choice for any skirmisher who's looking for authentic styling combined with Airsoft functionality.

It is loaded using a speedloader on the feed port found at the top of the magazine.

The Matrix Ribbed Pistol Grip for AK AEGs is a simple but effective upgrade or replacement part designed to improve handling and control. Built from high-quality polymer, it keeps weight low while maintaining durability for regular skirmish use or as a repair component.

Its ribbed front and rear surfaces provide extra traction in wet or gloved conditions, while subtle side texturing improves grip without feeling abrasive. Compatible with a wide range of AK-pattern AEG rifles, this grip is ideal for restoring worn builds or refining ergonomics without unnecessary complexity.

The Matrix M1 Retention Lanyard for Pistols is a practical accessory that keeps your sidearm secure while still allowing full freedom of movement during use. Ideal for training, range days or skirmish scenarios, it ensures your pistol stays attached to your kit without interfering with handling or manipulation.

Built from a combination of steel, high-durability nylon and a PVC-coated bungee cord, this lanyard is made to withstand regular use and demanding environments. The elastic retention cord stretches naturally during presentation or aiming, then retracts to keep your pistol close and controlled when released.

Its Velcro belt attachment makes fitting simple and secure, allowing it to integrate easily with belts, rigs or tactical loadouts. Designed to be universally compatible, it fits most pistols and compact SMG platforms, making it a versatile retention solution for a wide range of loadouts.

If you're working on a military-style build or you seek a simple yet effective vertical grip, the Matrix Vertical Foregrip for 20mm Picatinny Rails is ideal. Made from nylon-fibre reinforced polymer, this grip is inspired by the real steel KAC VFG, the iconic vertical grip often seen on MK18, M4A1 and MK12 SPR rifles in real steel form. 

Designed to mount to 20mm Picatinny rails with its user-friendly, toolless interface, this Vertical Foregrip is ideal for improving platform handling at close range and keeping your hand clear of any mounted accessories. Its ribbed design provides extra traction for wet-weather operations, with or without gloves. If you prefer the classic vertical foregrip for its looks, handling, or both, the Matrix Vertical Foregrip for 20mm Picatinny Rails belongs on your build!

Whether you're working on a milsim look or you're a Call of Duty fan, the Matrix Daniel Defense® MK18 Mod.1 AEG should be in your sights! A realistic build made predominantly from aluminium alloy with an alloy outer barrel and trim parts as well, this MK18 build boasts official licensing from Daniel Defense via EMG, meaning we're treated to realistic trademarks across the design, ideal for realism nuts!

Inside, the Matrix MK18 is based around an alloy V2 gearbox with TM-compatible internal parts, providing plenty of upgrade options on the aftermarket. Inside the gearbox, we have 18:1 ratio steel gears running on 8mm bushings, a quick-change spring guide for easy power tuning and a 6.02mm tightbore inner barrel to enhance accuracy. The pre-installed Electronic Trigger Unit (ETU) boosts trigger response, prevents lockups and improves electrical efficiency, especially paired with the on-board low-resistance wiring!

Ready to be decked out with 20mm Picatinny accessories and a tracer unit or suppressor for the special forces look, the Matrix Daniel Defense® MK18 Mod.1 AEG is a superb beginner's choice, especially ideal for milsim-leaning skirmishers. If you want the MK18 look without spending big bucks, this is the best way to do it!

Whether you're working on a milsim look or you're a Call of Duty fan, the Matrix Daniel Defense® MK18 Mod.1 AEG should be in your sights! A realistic build made predominantly from aluminium alloy with an alloy outer barrel and trim parts as well, this MK18 build boasts official licensing from Daniel Defense via EMG, meaning we're treated to realistic trademarks across the design, ideal for realism nuts!

Inside, the Matrix MK18 is based around an alloy V2 gearbox with TM-compatible internal parts, providing plenty of upgrade options on the aftermarket. Inside the gearbox, we have 18:1 ratio steel gears running on 8mm bushings, a quick-change spring guide for easy power tuning and a 6.02mm tightbore inner barrel to enhance accuracy. The pre-installed Electronic Trigger Unit (ETU) boosts trigger response, prevents lockups and improves electrical efficiency, especially paired with the on-board low-resistance wiring!

Ready to be decked out with 20mm Picatinny accessories and a tracer unit or suppressor for the special forces look, the Matrix Daniel Defense® MK18 Mod.1 AEG is a superb beginner's choice, especially ideal for milsim-leaning skirmishers. If you want the MK18 look without spending big bucks, this is the best way to do it!