Double Eagle Airsoft

The Double Eagle M56AL is the long version of the well liked M3 super 90 shotgun, a classic pump action shotgun design which feeds from 30rnd mock shotgun shells in the breech, and fires 3 BBs per trigger pull to appropriately simulate the spread of a real shotgun buckshot shell. The M56AL is constructed almost entirely from polymer with an alloy outer barrel and mock magazine tube, which makes this shotgun light and manoeuvrable despite its large and in charge status. Whether you fancy a challenge in CQB, or you are a fan of the movie Heat (1995), this shotgun would be an asset to your loadout.

The Double Eagle PDW Style stock for M4/AR-15 Rifles is a great replacement or enhancement for your platform with a "Honey Badger" receiver. Due to the width of the alloy stock bars, it only fits this style of receiver and will not fit standard M4 receivers. It provides 3 adjustment positions, so you can decide how compact you want your playstyle to be. To adjust the stock position, press down both buttons located on either side of the stock then slide the stock to your desired position.

The butt plate is constructed from high-density polymer and features a skeletonised design, it provides comfort and security when wearing full-body gear and operating from modern shooting stances. The buffer tube has an angled cheek pad for improved comfort when aiming down sights.

The battery compartment is located within the buffer tube and can be accessed by pushing down on the tab on top of the buffer tube. It provides roughly 11cm of battery space allowing for most common batteries. However, you must ensure that you select an appropriately sized battery, so that you don't crush it in the tight space.

Perfect for any Airsofter wielding an Airsoft pump action shotgun; this pack of Airsoft shotgun shells contains 3 red and 3 black shells, each capable of holding 30 rounds of 6mm Airsoft BB ammunition.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

Now here's a shotgun with some serious functionality for all you operators out there, looking to dominate any CQB environment 

With it's satisfying pump action, tri shot spread, this shotty lets you deal with any potential insurgents with ease.

Also featured are raised sighs for that extra bit of accuracy and adjustable, rotating stock that can be set to your build and playstyle, with it's lightweight build and manoeuvrable playstyle, while still pack some heat!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you are looking for a cost effective starting point to try your hand as an Airsoft sniper, or you need an ultra-lightweight counter sniping solution for those moments you find yourself pinned down, the M52 from Double Eagle would fill the role well. This sniper rifle comes out of the box firing around 380 FPS with a smooth bolt pull, enabling faster follow up shots and making this rifle accessible for those with lower physical strength. The M52 is constructed entirely from lightweight ABS polymer and includes an alloy 20mm Picatinny receiver rail and alloy bolt handle to add rigidity where needed. 

The M904 series of Airsoft AEG are some of the latest guns from Double Eagle (DE) Airsoft featuring their latest Electronic Fire Control System which allows for 1-5 Round Burst, a Bump fire Trigger, and boasts a gearbox and battery protection system. Not only does the replica come with an intelligent control system, it is based off he M4 platform, and comes with a full length top rail and MLOK handguard for many customisation options, as well as a compact CQB sliding stock to keep everything as tight as possible.

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

If you are sniping you probably don't need that much extra ammo, but there is nothing worse than hiding on the deck fumbling with your speed loader as the enemy close in, trust us! The Double Eagle M52 magazine is constructed from polymer and holds 27 rounds, giving you 27 more chances to get that kill! These magazines are nice and compact, and easy to store inside pistol magazine pouches or a utility pouch. This magazine looks like a VSR design but we have not yet been able to confirm compatibility.

A spring powered pump action 6mm BB Airsoft shotgun, designed to function like a real shotgun for use in Airsoft skirmishes and events.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

If you're bored with your pistol and want a more substantial secondary platform, this bundle should see you well equipped! The Tri-Shot Shotgun Secondary Bundle packages the Double Eagle M56DL with 4 extra 30rnd shells, the 8Fields Tactical Back Scabbard and a bag of Delta BBs.

Whether you're tearing through your local CQB site clearing rooms or you just want to keep a shotgun handy for close encounters, the lightweight but potent M56AL will be a superb asset to your skirmish experience!

If you are after a unique and affordable Airsoft AEG submachine gun, the Double Eagle M89A fits the bill! This AEG sports full metal construction, and its nearly 100% fibre reinforced polymer construction matches the real thing in almost every way. This AEG has a compact front end bristling in 20mm Picatinny rails, making it ready for any accessories you want to mount, and boasts as well designed and rock solid side folding stock allowing the M89 to be used in intense close quarters engagements and also fit into smaller gun bags/cases!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!

A 6mm BB Airsoft 450 round high capacity magazine, designed to be used with Double Eagles M89A series of Airsoft Electric Guns.

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

If you own the gorgeous new JDG Polymer 80 PFS9 from Double Eagle, or you have a TM based EU series GBB and you need better rapid-fire performance, this magazine is a great way to get there! The 30rnd JDG P80 PFS9 magazine is constructed from alloy with polymer feed lips and a steel feed spring and holds 30 BBs which can be loaded either using a speed loader or by hand through the feed lips or the feed port on the front which is accessible when the follower is pulled down. The advantage of using this magazine over a standard length EU series mag is its enlarged gas reservoir, meaning better cold weather performance, less FPS variance under rapid-fire and more shots per fill of gas.

The Double Eagle M904H is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

The Double Eagle M9XX range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an exceptional exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture. The M916G is equipped with an ergonomically designed M-LOK handguard which includes gripping surfaces, and provides a slick, snag-free AR15 design cast in high density polymer. This AEG also sports Double Eagle's highly advanced FALCON FCU, offering binary trigger, burst mode and other advanced features which can be programmed with the rifle's trigger and fire selector.

The Double Eagle M9XX range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an exceptional exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture. The M916G is equipped with an ergonomically designed M-LOK handguard which includes gripping surfaces, and provides a slick, snag-free AR15 design cast in high density polymer. This AEG also sports Double Eagle's highly advanced FALCON FCU, offering binary trigger, burst mode and other advanced features which can be programmed with the rifle's trigger and fire selector.

If you are a mobile, agile and hostile skirmisher, the Double Eagle UTR45 would be an asset to your kit list. We put this pack together to set CQB skirmishers up with one of our favourite platforms and equip it with a red dot sight and pair of spare mid-cap magazines, an ideal setup for a skirmisher who is light on their feet and uses every opportunity to close ground with the enemy and give them what for at kissing distance. With a speedy trigger response and an advanced programmable MOSFET system, the UTR45 is head and shoulders above anything else in its price range! 

If you have a Double Eagle M90x with the Honey Badger PDW stock and you fancy a change, until now you have been SOL! Introducing the Buffer Tube for Double Eagle M4/AR-15, a replacement original part from the M904 AEG. This set includes an alloy buffer tube and castle nut, a steel bolt and spacer and a polymer receiver stock adapter which can be used to convert an M90x series with the Honey Badger stock to a standard AR buffer tube.

Whether you have damaged the stock mounting apparatus on your Double Eagle M90x polymer receiver or you are bored of the Honey Badger look and you want to change things up, this set is the perfect thing!