Daniel Defense Airsoft Replicas

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you want to play Airsoft with a realistic full metal platform or have you had your eyes on an iconic MK18 platform, either way, the Specna Arms SA-E19 EDGE™ Daniel Defense® MK18 M4/AR-15 AEG; Kestrel Basic ETU should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups.

Being an AEG of the EDGE™ line, this Specna Arms MK18 is great straight out of the box, boasting 18:1 ratio steel gears, a Kestrel Basic ETU, a quick change spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness.

With more Picatinny rails than you'll ever need, a unique modern receiver design and the large battery space of an M4 Crane stock, the SA-E19 EDGE™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you're into all things Daniel or like the MK18 aesthetic, the EMG CM.105 Daniel Defense M4A1 12.5" AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the CM.105, boasting the same superb build quality, licenced Daniel Defense trademarks and pre-upgraded gearbox components as the original with a side of EShooter Kestrel Basic ETU to add advanced functionality into the mix.

The Kestrel Basic offers programmable fire modes, including 3-round burst and binary trigger, with 6 levels of adjustable pre-cocking; a major improvement over the Zeus MOSFET of the original. Also inside the V2 gearbox are CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges.

With all the best bits of the original further improved with the EShooter Kestrel Basic MOSFET, the CM.105 Daniel Defense M4A1 12.5" AEG is as well equipped internally as it is well built externally. Fans of the Daniel Defense look couldn't ask for a better primary out of the box!

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you dream of a beastly DMR build but don't want the hassle of building one yourself, the Bolster Tuned EMG Daniel Defense M4A1 RIII™ DMR Upgraded AEG is your best option! Based on the already impressive EMG Daniel Defense M4A1 RIII™ 14.5" AEG but ram-packed full of upgrade parts and tuned to absolute perfection, the Bolster Tuned M4A1 RIII™ is locked to semi-automatic and hits out at an impressive 410 FPS with a 0.2g BB, ready for DMR duty!

On the outside, the EMG M4A1 RIII™ is practically the perfect DMR base gun, with enough length for the DMR look paired with a light and agile RIS III M-LOK handguard, ergonomic Daniel Defense Buttstock and gorgeous licenced Daniel Defense trademarks. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for upgraded builds with high performance parameters.

Inside, you'll find a Gate ASTER™ MOSFET paired with the Gate QUANTUM™ CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan and an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding and the strength to handle the high power main spring.

To get your BBs way out there and onto target, a Laylax/Prometheus Purple HOP-up bucking paired with a Maple Leaf OMEGA nub was installed, giving you impressive accuracy for a high first-round-hit probability. The Warhead 35K Base Brushless Motor paired with an SHS Motor Pinion Gear and a Laylax EG 18:1 Hard Gear Set provides the durability, torque and heat dissipation qualities for peak efficiency, shocking trigger response and a long lifespan of reliable performance.

With a scary-fast trigger response, exceptional range and the ability to hit small targets out to 60 meters and beyond, this isn't just a high FPS platform locked to semi; each and every Bolster Tuned M4A1 RIII™ DMR is hand-assembled, tuned to perfection and put through rigorous testing on our 65m range. If it doesn't meet the Bolster standard, it doesn't leave the workbench until it does!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries. 

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds. 

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB. 

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries. 

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds. 

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB. 

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

Looking for a MK18 Airsoft AEG? Who isn't these days? As the rifle of choice for US Special Forces the MK18 has been immensely popular amongst both Milsim skirmishers due to its authenticity and more casual skirmishers who appreciate the MK18s practical feature set and aggressive looks. 

The CYMA CM.105 is a fully licenced replica from the CYMA Platinum series, sporting pre-upgraded internals with a high speed motor, tight bore inner barrel and ETU/MOSFET to regulate cycling and offer battery protection. The CM.105 differs from other Platinum AEGs with its official licencing from Daniel Defense through EMG in the US. This allows CYMA to add beautifully engraved authentic trademarks and a licenced DD MK18 rail system to their already impressive Platinum setup for what might be the ultimate AEG MK18!

Looking for a mid-ranged, SF-approved AEG rifle? The CM.105 is a full metal AEG with official licensing from Daniel Defense through Evike Manufacturing Group (EMG). This means it comes with perfectly engraved and absolutely authentic Daniel Defense trademarks on the magazine well, a licensed MK18 MOD1 style quad 20mm Rail System, and even more DD markings laser engraved into the side of the upper receiver. The CM.105 isn't just a looker, it also sports the same spritely rate of fire and trigger response as other AEGs in the CYMA Platinum lineup thanks to its high speed motor, and pre-installed ETU/MOSFET. This AEG looks the part, and shoots fantastically, so what are you waiting for?

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap