- Cast Aluminium housing
- Brushless motor - No brushes to get worn
- Short shaft version - For AR36, Thompson, AUG & AK AEGs
If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs.
Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.
The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you're working on a budget beast of an AEG build, the Warhead Industries Base Brushless Motor belongs inside! This, the short shaft version is designed for AR36, AK, AUG and Thompson AEGs and comes packaged with a D-type pinion gear and pinion spring with pre-mounted spade connectors. Motor installation is a relatively easy job in most cases, but given the sheer power of even the lowest-speed variant of the Warhead Base motor, we recommend doing a lot of research before attempting installation.
Conceived as a lower-cost alternative to the Warhead CNC Black Brushless motor, the Base uses a cast aluminium housing and machine-wound stator to keep the price low while providing comparable performance. The magnets used for the Base are the same level of quality as those used in the CNC Black, making it a great alternative for those who want to save a few quid on their high-performance build.
Like the CNC Black, the Base is equipped with an ESC (electronic speed control) module which can be replaced easily thanks to its modular design. This circuit controls and regulates the speed of the motor while providing low voltage cut-off and over-current-draw protection, providing an additional level of safety and keeping your battery healthy.
Brushless motors offer reduced heat build-up, reduced mechanical noise when running, improved reliability due to the lack of conventional brushes and improved torque to weight ratio. If you're going for a top-end build, whether it is a DMR requiring high torque for strong springs or an LMG which requires maximum speed, the Warhead Base is the ideal motor!
Features
- Cast Aluminium housing
- Brushless motor advantages:
- Reduced heat build-up
- Higher torque-to-weight ratio
- Increased reliability and less maintenance required
- Reduced mechanical noise
- Less electromagnetic interference (EMI)
- Less electrostatic discharge (ESD)
- 3 Speeds available - 27K, 35K or 45K Revolutions per minute
- Short shaft motor - For AK, AR36, AUG & Thompson AEGs
- High-quality magnets - Equivelant to those used in the CNC Black motor
- Electronic Speed Control Module - Regulates speed, provides low voltage cut-off & over-current-draw protection
- D Type motor shaft - Widely regarded as the strongest shaft type, compatible with D-type pinion gears
- CNC Steel Pinion gear and spring steel pinion spring included
- NOT recommended for amateurs - This motor is no joke, you will need a lot of reinforced parts to run it!
Package Includes
- Warhead Base Brushless Motor; Short Shaft
- Pinion Gear
- Pinion Spring
Specification
General
|
Parts & Accessories Type
|
Electric Internal Parts
|
|---|---|
|
Internal Part Type
|
Motor & Parts, Motor,
|
 |
 Custom Parts
|
|
Name Variant
|
35K RPM, 45K RPM, 27K RPM,
|
Construction
 |
 |
|---|---|
 |
Cast Aluminium housing. Hardened Steel pinion gear. Spring steel pinion spring.
|
|
Internal Part Construction
|
Steel, Aluminium, Spring Steel,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
|
Package Includes
|
|
Motor Specific
 |
Brushless Motor
|
|---|---|
|
Motor Shaft Length
|
Short
|
|
Motor Pinion Type
|
D-Type
|
|
Motor Speed
|
Approx. 27000RPM, Approx. 35000RPM, Approx. 45000RPM,
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.