- CNC Aluminium construction
- White light/IR/Red laser unit for 20mm rails
- Pressure switch included - Crane jack
If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision.
The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The WADSN OGL adds yet another multi-function aiming/illumination device to the Airsofters' arsenal, with similar functionality to PEQ-15 and DBAL units but constructed from precisely CNC machined aluminium for a more high quality feel and a more robust structure.
The OGL offers several modes, all controlled via the rotary mode selection dial on the rear of the unit. The activation button is on the top of the unit and can be used as either a constant on or momentary on switch depending on what mode the selector dial is in. The unit is also supplied with a pressure switch with the Crane type jack so you can run it out further on your rail and still operate it with ease. Dual pressure switches are also available for the OGL and SF Scout light, you can find them here.
Inside the OGL is a white light illuminator, red visible aiming laser and IR laser for use with night vision devices. The sliding switch just in front of the activation button allows you to vary the intensity of the white light so it can be used for navigation without alerting enemies in the next room. The red & IR lasers are fully adjustable via the adjustment screws on the right side of the unit, with the one on top controlling elevation and the dial on the right side controlling windage. Both lasers zero as a single unit so you don't need to don your NODs and wait for nightfall to zero your IR laser.
The battery compartment is located on the right side of the unit and is accessible with the battery cap on the rear right unscrewed. To avoid it getting lost in the field or at home, the battery cap is connected to the unit via a rubber retainer. The WADSN OGL requires a single CR123a 3V cell to operate (not included) and the direction of insertion is helpfully indicated on the top of the unit with a laser-engraved white marking.
If you have the need to dress your Airsoft guns up to impress, an OGL will make her the belle of the ball! This unit is not only built like a tank but it has all the tricks up its sleeve, including night vision compatibility thanks to its infrared laser!
Features
- CNC Aluminium construction
- Integrated 20mm Picatinny rail mount
- PEQ/DBAL style laser unit - White light, red laser & IR laser
- Pressure switch included - Crane jack
- Flip-to-side aperture covers with rubber retainers
- White light output: 150 Lumens
- Laser class: LASER IIIR <5mw (Red Laser 635nm)
- Activation button on the top - Marked "FIRE"
- Mode selector switch on the rear - Rotary dial:
- AH - Visible Laser Flash Mode
- AL - Visible Laser Constant On
- OFF - OFF
- AL - Visible Laser & White light Illuminator
- DL - White Light Illuminator only
- AH - White Light Illuminator Stroboscopic mode
- IH - White Light Illuminator Momentary On
- DH - Infrared (IR) Laser
- Red/IR lasers can be zeroed - Adjustment for elevation on the top right, windage on the right side
- Battery: 1 x CR123A 3V Cell (not included)
- Supplied in a hard storage/transport case
Package Includes
- WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR
- Pressure switch
- Warning stickers
- 3M Self adhesive Velcro strip
- Allen key
- User manual
Specification
General
|
Parts & Accessories Type
|
Flashlight, Torches, and Lasers, Flashlight / Torch, Laser,
|
|---|---|
 |
No
|
 |
Laser
|
Weight and Dimension
 |
Approx. 0.155kg
|
|---|---|
|
Product Height
|
Approx. 4cm
|
|
Product Length
|
Approx. 10cm
|
|
Product Width
|
Approx. 5.5cm
|
Construction
 |
Black,
Dark Earth,
|
|---|---|
 |
Aluminium shroud, steel mounting bolt, polymer aperture covers with rubber retainers.
|
 |
Rubber, Polymer, Aluminium, Steel,
|
 |
20mm RIS / RAS
|
|---|