- 1300mAh
- 11.1v 3S LiPo
- Crane Battery
A super thin triple crane stock 11.1v 1300mAh 25C LiPo that features a standard Tamiya connector and is made up of three individual thin cells, making it great for squeezing into awkward spaces.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Charge this battery the right way...
Description
Designed for use in either a solid or crane stock with side battery storage tubes, each row of cells are less than 1cm thick and can be used together or separately to be placed in irregularly shaped stocks and hand guards. The batteries can also be used in remote control Cars, Boats, Planes and other Toys, as well as in DIY Electronics projects.
Features
- 11.1v
- 1300mAh
- 3 x cells
- Small Tamiya connector
- 8cm cable
- Approx. 9.8cm x 2.1cm x 2.4cm
- 25c rating
- High Powered battery for increasing motor rate
- Can be placed in combined or separated to fit the required space
Package Includes
- 11.1v 1300mAh 25C LiPo Crane Stock Battery - Tamiya
- Instruction Manual
Special Instructions
Please note that we only recommend that this battery be used in Highly upgraded guns, and as such we cannot provide a warranty on any gun which has had an 11.1v battery used on it.
Please do not let the battery fully discharge before recharging, this will damage the battery, please use a LiPo Alarm to check the Charge of the Battery before use, and stop if the Rate of Fire Drops. To charge the battery you MUST use a Li-Po Battery Charger, as overcharging can cause damage to the unit.
Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure.
Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be ore than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.
We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.
Specification
General
|
Parts & Accessories Type
|
Battery
|
|---|---|
|
Product Length
|
Approx. 9.8cm
|
|
Product Height
|
Approx. 2.1cm
|
|
Product Width
|
Approx. 2.4cm
|
 |
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
|
Battery Specification
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
 |
 |
11.1V
|
 |
1300mAh
|
 |
25
|
 |
3
|
 |
3.7V
|
 |
0.6cm
|
 |
8cm
|
Size guide
MAKE SURE YOU USE THE CORRECT CHARGER TYPE FOR THE CORRECT BATTERY
Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.
Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.
If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.
We always recommend charging LiPos and other batteries in a charging bag.
If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.
Using a LiPo?
If you're using a Li-Po battery only use a Li-Po charger!
Failure to do so can cause damage to the battery and charger!
Using a NiMh?
If you're using a Ni-Mh battery only use a Ni-Mh charger!
Failure to do so can cause damage to the battery and charger!
Customer reviews
