- R-HOP Kit for AEGs
- Includes bucking & nub
- Extend range & improve accuracy
Whether you're building a DMR or simply want more range from your standard AEG, an R-HOP kit can make all the difference. Unlike other R-HOP kits on the market, the Trusight Tru-Hop Gen.3 is designed to be effectively a drop-in installation, with no need for adding patches of various sizes and includes both the HOP-up bucking and a concave HOP-up nub.
The set is designed to be widely compatible and should fit most Airsoft AEG spec inner barrels, though due to its enlarged contact patch, it will only work with inner barrels with a window measuring approximately 5mm in length x 1.7mm in depth. If you are happy to get stuck in with your AEG internals and you're looking for range and accuracy improvements, the Trusight Tru-Hop Gen.3 Hop-Up Rubber is what you need!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
An advancement of the Trusight Gen.1 and Gen.2 Tru-HOP sets, the Tru-Hop Gen.3 Hop-Up Rubber is designed to provide pinpoint accuracy at extreme ranges and will perform flawlessly in any environmental temperature. Whether you're shooting in the bleak mid-winter or during the height of summer, the Tru-Hop Gen.3 will provide the same perfect performance.
When compared to the Gen.2, the Gen.3 offers tighter groupings at long range but sacrifices a slight bit of overall range to do this, making it ideal for accuracy-focused setups. The design of the Gen.3 sticks to Tokyo Marui spec when it comes to the thickness of the bucking walls but extends the contact patch both in depth and length, meaning a stronger HOP-up effect, less side-to-side deviation and the ability to apply maximum HOP-up tension without sacrificing FPS.
The set includes both the HOP-up bucking and a concave HOP-up nub intended to achieve the full potential of the Tru-Hop system by applying pressure to the entire HOP-up contact patch inside the bucking. Installing the nub is not essential for function but adds a lot to the overall setup, functioning similarly to well-regarded "OMEGA" nubs.
Compatibility-wise, the Tru-Hop will fit most Airsoft AEG spec inner barrels but not all of them. Ideally, the barrel window should measure 5mm in length x 1.7mm in depth at a minimum (diagram available on the Trusight Website) to allow for the extended HOP-up patch and concave nub. Trusight recommends coating the HOP-up bucking with a thin film of silicone lubricant to aid installation, and the Tru-Hop requires a break-in period of between 500 and 1000 rounds before you will see its true potential shine forth.
As always, we only recommend internal upgrade parts for those with experience or those willing to learn, though this R-HOP kit is probably the easiest to install on the market right now, and barely different than installing a standard HOP-up rubber.
Features
- R-HOP Kit - Extends range and improves accuracy
- Easy installation - No trial and error, no messing around with patches
- Includes HOP-up bucking and concave HOP-up nub
- Consistent HOP-up performance between -50°C to 230°C
- Compatible with most Airsoft AEG inner barrels - Barrel window size 5mm length x 1.7mm depth
- Check the Trusight Website for detailed compatibility before ordering
Package Includes
- Trusight Tru-Hop Gen.3 HOP-Up Rubber; AEG Version
- Tru-Hop Gen.3 Bucking
- Tru-Hop Concave nub
Specification
General
|
Parts & Accessories Type
|
Internal Parts
|
|---|---|
|
Internal Part Type
|
Hop-Up Rubber, Hop-Up & Parts, Hop-Up Nub,
|
 |
The Tru-hop Gen.3 only works with specific inner barrel window sizes. More information is available in the "Full Description" and on trusightairsoft.com
|
Construction
 |
Red,
Blue,
|
|---|---|
 |
Silicone HOP-up bucking with polymer concave HOP-up nub
|
|
Internal Part Construction
|
Polymer, Silicon,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
|
Package Includes
|
|
Electric Part Specific
|
Gearbox Version Compatibility Variant
|
Most Airsoft AEG
|
|---|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.