If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you're refurbishing an old helmet or need to replace some ageing padding, PTS has your back! The Comfort Pads for PTS MTEK FLUX Helmet mount to the internal Velcro inside FLUX and other helmets, allowing you to get the perfect fit on your noggin thanks to their modular design.

While designed specifically for the PTS MTEK FLUX Helmet, these pads should fit most other helmets with removable padding and internal Velcro, making them a great upgrade for extra comfort. Whether you seek replacement padding for hygiene reasons or your helmet slides around on your head as you run, the PTS Syndicate Comfort Pads for PTS MTEK FLUX Helmet are ideal!

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

If you're a fan of modern shooting techniques and rock around with an M4, AR-15 or SCAR-L, this magazine is just for you! The PTS Syndicate EPM 150rnd Mid-Cap Magazine w/ MultiTasker® Mag Pod Base Plate is perfect for realism seekers as the base plate included is designed for real steel magazines but they are also compatible with Airsoft magazines.

The BB guide of the magazine is coloured bright orange, allowing you to see the number of BBs remaining, from the top, side and lower part of the magazine. You can pick up the mag and know exactly how many BBs are remaining. It is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight.

A replacement mock Compensator / Flash Hider for Airsoft 6mm BB Guns, fully licensed by PTS Syndicate, and is a replica based on the Griffin Armament design. 

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you're into modern shooting techniques and running PTS EPM Gen.2 mid-caps, these should interest you! The PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack are genuine real steel magazine enhancements designed for real P-Mag Gen.2 AR-15 magazines but also compatible with PTS EPM Gen.2 mid-cap magazines. 

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight, the PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack is what you need!

If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

A replacement for your Airsoft gun's standard flash hider, this compact 14mm CW threaded compensator is a small way to dramatically alter the appearance of your Airsoft gun. 

If you're seeking replacement accessory rails for your PTS MTEK Flux helmet, you've found what you need! The PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are made from Dupont Zytel Polymer and designed specifically for the PTS MTEK Flux. These rails provide M-LOK slots positioned horizontally and vertically, allowing a plethora of accessories to be mounted including headset arms and navigation lights.

These accessory rails are only for the Flux and are unlikely to fit other brands without modification. Whether you're refurbishing an old helmet or adding some unique contrast to make your lid stand out, the PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are a fine choice!

If you're seeking replacement accessory rails for your PTS MTEK Flux helmet, you've found what you need! The PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are made from Dupont Zytel Polymer and designed specifically for the PTS MTEK Flux. These rails provide M-LOK slots positioned horizontally and vertically, allowing a plethora of accessories to be mounted including headset arms and navigation lights.

These accessory rails are only for the Flux and are unlikely to fit other brands without modification. Whether you're refurbishing an old helmet or adding some unique contrast to make your lid stand out, the PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are a fine choice!

If your helmet is a bit battered, no need to get a new one! The PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet is a complete set of internal padding, the same type used in the PTS MTEK Flux Helmet. The foam padding is very comfortable, a considerable step up from the padding found in most clone helmets and thankfully, this padding should fit other helmets provided they have removable pads and internal velcro.

Whether you're seeking replacement padding for hygiene reasons or you want a comfort improvement, the PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet will do the trick!

If you're seeking a way to style up your PTS EPM-AR9 magazines, these will do the trick! The PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack are constructed from the same rock-solid Dupont Zytel Polymer as the originals but finished in red, adding a touch of contrast to your setup to make it really pop.

Like the original black baseplates, the red versions have a dot matrix on each, ideally suited to marking your magazines, either numerically or to identify which mag is yours. The set also includes 3 mounting screws which is great news for those who've lost one. If you're an aggressive skirmisher who values style over concealment, the PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack in spicy red will suit your needs perfectly!

If you're looking for an interesting flash hider to top off your build, the PTS BattleComp 2.0 Flash Hider is the stylish touch your primary needs! A detailed, licensed replica of the real steel BattleComp 2.0, this flash hider is made from steel and ready to mount on any 14mm Clockwise (CW) male threaded outer barrel.

The real steel BattleComp 2.0 came about following the success of earlier BattleComp muzzle brakes, designed for military applications which require compatibility with QD suppressors. Like the real thing, the PTS BattleComp 2.0 is compatible with "A2 Birdcage" compatible suppressors, including KAC QD style suppressors and the B&T Rotex QD suppressor. If your primary has a 14mm clockwise threaded barrel and it needs a top notch muzzle device, the PTS BattleComp 2.0 Flash Hider is ideal!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!