PARRA No. 691 Delphis Waterproof Medical Case

PARRA
Code: PRA-069
199.00 kr.
Was 319.00 kr.
Save 120.00 kr.
  • Intertek Certified
  • Pick and Pluck Foam
  • Water / Crush / Dust Proof

The No.691 Delphis Waterproof Medical Case is a rugged Hard Case made from Polypropylene (PP) + Glass Fibre Resin Material, with Pick and Pluck Foam internals and seriously tough hinges supported by Stainless Steel pins. Despite the name, this Hard Case can be put to any use and labelled appropriately using the Name Tag Slider. Easily stackable, if you need to transport delicate/sensitive equipment from A to B and want to know it's fully protected from Water, Dust, Impacts and Extreme Temperatures, then you're in the right place.

Full description

Description

The Delphis Medical Case is suitable for a massive range of contents, and will protect them from the elements as certified by third party quality assurance company, Intertek. The strength of the Delphis Case is made possible thanks to its Polypropylene (PP) + Glass Fibre Resin construction and reinforced sections, giving it the durability it needs in all the right places, and rubber seal which protects the contents from dust and liquids. The handle of the case can be folded away to make it even more compact in storage, and a Name Tag section allows you to label the case appropriately - very useful for those who plan on having multiple cases stacked together.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong single movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

Whether you want to transport sensitive medical equipment, or need a moderately sized Hard Case that you can be assured will protect the contents from even the harshest environments and can be easily stacked together with other cases to save space, then the No. 691 Delphis Waterproof Medical Case is just what you're looking for.

Features

  • Designed for Medical Equipment
  • Suits a huge range of purposes
  • Moderately sized Polypropylene (PP) + Glass Fibre Resin hard case
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67 
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two single movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 691 Delphis Waterproof Medical Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Two Pick-Pluck foam storage inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
  • Polypropylene
  • Fiberglass
Product Length
Approx. 26.5cm
Product Width
Approx. 23cm
Product Height
Approx. 17.5cm

Case Related

General

Case Size
Small
Recommended For
  • Sights
  • Attatchments

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Crush Proof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Egg Shell Foam Lid Insert
  • Thin Base Separator Padding
  • Thick Separator Padding x 2
Latches
Latch Types
Dual Movement Clasp
Latch Count
2
Handles
Grab Handle
Yes
Handle Type
Rubberised Carry Handle x 1
Wheels
Has Wheels
No
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx. 1.128kg
Weight With Padding
1.235kg
External
External Length
Approx.26.5cm
External Width
Approx.23cm
External Height
Approx.17.5cm
Internal
Internal Corner Radius
Approx.10mm
Base
Base Internal Depth
Approx.12.6cm
Base Internal Lower Length
Approx.22cm
Base Internal Lower Width
Approx.16.8cm
Base Upper Length
Approx.23.8cm
Base Upper Width
Approx.18.2cm
Lid
Lid Internal Depth
Approx.3.16cm
Lid Lower Length
Approx.23cm
Lid Lower Width
Approx.17.3cm
Lid Upper Length
Approx.23.8cm
Lid Upper Width
Approx.18.1cm

Related video

PARRA Camera Cases Livestream