- Automatic Pressure Valve
- IP67 Rated Hard Case
- Secure Lock Holes
A strong and durable heavy duty plastic hard case designed to protect valuable tactical equipment from damage or scratching during storage or transport too and from your Airsoft game site. This case has a wide variety of safety features made to ensure that even your most valuable Airsoft kit stay safe even during the toughest conditions.
The case is IP rated, and fully tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is waterproof, dust-proof, and shock proof, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.
The case is perfect for any kit you would use both on and off the Airsoft field, being the perfect size not only for sight, torch, PEQ box or attachment storage, but also for storing hard drives and other small electronics.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
This hard case comes in a low profile design, without compromising on strength and build quality. The case is constructed from heavy duty Polypropylene (PP) + Glass Fibre which is lightweight yet extremely strong, with the reinforced sections lining up with small feet allowing you to stack the cases without them sliding around. The case is well thought out, with a breathable air valve as well as a durable rubber seal which protects the contents from dust and liquids. The case is small enough to put in other secure storage solutions, or in bags, backpacks, inside cars and other small places.
The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with a thick pick and pluck layer allowing you to customise the shape of the foam to make the perfect fit to the items you intend to store. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, or a pistol and magazines.
The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.
The case features heavy duty clasps designed to keep the case secure, with two strong single movement clasps which make the case easy to open, but give an extremely strong lock for transport. The case also features two pad-lock holes to protect from tampering, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone wanting to try and get to the contents.
The case features an automatic pressure valve which equalises the pressure inside the case to be the same as outside, without allowing water into the case whilst keeping the internal pressure balanced.
This hard case i great for storing small items such as Sights, Torches, PEQ boxes and other valuable Airsoft Attachments. If you're looking for a case for non-airsoft related activities this case can be used to store sensitive electronics such as computer hard drives.
Features
- Perfect for storing Sights and other Attachments
- Perfect for storing Hard Drives and Electronics
- Small enough to store in other cases, backpacks and under furniture
- Built from durable Polypropylene (PP) + Glass Fibre
- IP Rated up to IP 67
- Watertight design to prevent water leaks
- Protected against water submersion up to 1m for 30 mins
- Dustproof to protect contents
- Crushproof build for transport
- Reinforced exactly where needed
- Secure single movement clasp
- Folding grab handle for compact storage
- Rubberised grip handle to prevent slippage
- Automatic pressure valve to balance interior pressure
- Stainless steel hinge pins
- Padlock holes for using a TSA lock or during storage
- Protects in low temperatures down to -40°c
- Protects in high temperatures up to 90°c
- Replaceable side ID label cover
Package Includes
- No. 010 Lucasana Sight Hard Case
- Wave Foam Lid Insert
- Pick and Pluck Foam Base Insert
- Foam Separator base insert
Specification
General
|
Black
|
---|---|
|
|
Product Length
|
Approx. 19.2cm
|
Product Width
|
Approx. 18cm
|
Product Height
|
Approx. 6cm
|
Case Related
General
Case Size
|
Small
|
---|---|
|
|
Case Features
Ratings
|
IP67
|
---|---|
|
Intertek
|
|
Waterproof IP67-IEC60529 edition 2.2 Clause 13.6 and Clause 14.2.7
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Immersion test - MIL-STD-810 F Notice 3 Method 512.4
Low temperature test - IEC60068-2-1 Sixth edition
High temperature test- IEC60068-2-2 Fifth edition
|
Protection
|
Water Resistant
|
---|---|
|
Yes
|
|
Yes
|
|
Yes
|
|
Yes
|
|
Yes
|
|
-40°c
|
|
90°c
|
Padding
|
Yes
|
---|---|
|
Soft Foam
|
|
|
Latches
|
Single Movement Clasp
|
---|---|
|
2
|
Handles
|
Yes
|
---|---|
|
Folding Carry Handle
|
Wheels
|
No
|
---|
Security
|
Padlock Holes
|
---|
Dimensions & Weight
Weight
|
Approx. 0.405kg
|
---|---|
|
0.425kg
|
External
|
Approx.19.2cm
|
---|---|
|
Approx.18cm
|
|
Approx.6cm
|
Internal
|
Approx.3mm
|
---|
Base
|
Approx.3.4cm
|
---|---|
|
Approx.16.8cm
|
|
Approx.13.35cm
|
|
Approx.16.8cm
|
|
Approx.13.35cm
|
Lid
|
Approx.1.7cm
|
---|---|
|
Approx.16.8cm
|
|
Approx.13.35cm
|
|
Approx.16.8cm
|
|
Approx.13.35cm
|