NUPROL 11.1V 2600mAh 20c LiPo Crane Battery (Deans)

NUPROL
Code: 8133
359.00 kr.
  • 11.1v LiPo
  • 2600mAh Capacity
  • 3 x Individual Cells

An absolutely massive 11.1v LiPo 2600mAh 20c LiPo Battery in a Crane Stock configuration, with three cells which have individual dimensions of: 13.1cm x 1.98cm x 1.13cm. It has a 9cm cable with a Deans Connector on the end.

Full description

Help
Size guide

Charge this battery the right way...

Description

Features

  • 11.1v LiPo
  • 2600mAh Capacity
  • 20c Discharge Rate (Cont.)
  • 40c Discharge Rate (Burst)
  • 3 x Individual Cells
  • Deans Connector
  • 9cm Cable
  • Huge Battery
  • Massive Capacity

Package Includes

  • NUPROL 11.1V 2600mAh 20c LiPo Crane Battery (Deans)

Special Instructions

Please ensure that your Airsoft weapon is built for 11.1v batteries. If your weapon is not rated for such a high voltage it can damage or break your weapon. Please check beforehand to avoid any damage.

When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.

Safety Precautions

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be ore than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.


Specification

General

Parts & Accessories Type
Battery
Product Length
Approx. 13.1cm
Product Height
Approx. 1.13cm
Product Width
Approx. 1.98cm
Weight KG Icon
 Weight (KG)
Approx. 0.172kg
Patrol Base - Warning Icon
 Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Battery Specification

Battery Type
Li-Po
Battery Configuration
Crane
Battery Connector
Patrol Base | Icon | Deans
 Deans
Battery Voltage
11.1V
Battery Amperage
2600mAh
Battery Discharge Rate
20
Battery Cell Count
3
Battery Cell Height
1.13cm
Battery Wire Length
9cm

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

We always recommend charging LiPos and other batteries in a charging bag.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.