- 7.4V 600mAh
- Mini-Deans connector
- For Novritsch SSE18 & CYMA MOSFET AEPs
If you're looking for a tiny LiPo battery for your Novritsch SSE18 or CYMA CM.1xxS MOSFET equipped AEP, this is what you need. The Novritsch 7.4V 600mAh LiPo Battery measures approximately 7.3 x 1.5 x 1cm and is pre-wired with a Mini-Deans battery connector and a 3 port balance connector.
As with other LiPo batteries, this battery should only ever be charged on a LiPo balance charger, preferably in a battery charging bag and should not be left on charge unattended under any circumstance.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Charge this battery the right way...
Description
Features
- 7.4V 2s LiPo battery
- 600mAh Capacity
- 20C Discharge rate
- Mini-Deans connector
- Approximate dimensions: 7.3 x 1.5 x 1cm
- Wire length - 6cm Approx.
- Suitable for Novritsch SSE18 AEP & CYMA CM.1XXS MOSFET AEPs
- NOT Suitable for standard AEPs - Use a 7.2V 500mAh NiMh instead
Package Includes
- Novritsch 7.4V 600mAh LiPo Battery for SSE18/CYMA S-series AEP
Specification
General
|
Parts & Accessories Type
|
Battery
|
|---|---|
|
Product Length
|
Approx. 7.3cm
|
|
Product Height
|
Approx. 1cm
|
|
Product Width
|
Approx. 1.5cm
|
 |
Approx. 0.029kg
|
 |
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
This LiPo battery must be charged using the balance port and a LiPo balance charger.
|
Battery Specification
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
Mini-Deans Connector
|
 |
7.4V
|
 |
600mAh
|
 |
20
|
 |
2
|
 |
3.7V
|
 |
6cm
|
Size guide
MAKE SURE YOU USE THE CORRECT CHARGER TYPE FOR THE CORRECT BATTERY
Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.
Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.
If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.
We always recommend charging LiPos and other batteries in a charging bag.
If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.
Using a LiPo?
If you're using a Li-Po battery only use a Li-Po charger!
Failure to do so can cause damage to the battery and charger!
Using a NiMh?
If you're using a Ni-Mh battery only use a Ni-Mh charger!
Failure to do so can cause damage to the battery and charger!