Gas Blowback Internal Parts

So you have yourself a snappy pistol, but you want MORE speed? If you say so! The RS1 recoil spring from CowCow replaces your original recoil spring and will increase the speed at which your slide returns to battery, increasing the cyclic rate. Perfect for those who need that extra bit of speed!

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

If you have dropped a mag mid game you probably have a set of broken feed lips, but fear not! The Army Armament Magazine Feed Lips for Hi-capa GBB is designed to replace the original feed lips of AA Hi-capa magazines whether they are cracked from an accidental drop or just getting a bit worn out. 

A replacement Hammer and Spring for the RAVEN EU18 automatic gas-powered pistol.

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

An upgrade or replacement stock sear spring for gas blowback pistols. The spring is made of robust steel and therefore will hold its shape better than stock springs, which is perfect for keeping your trigger action to be short and crisp. Due to the springs high tolerance, there would be no need to shave it down to fit in your grip.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

The Maple Leaf MR HOP-up Bucking is widely regarded as the best HOP-up bucking offered by Maple Leaf, offering a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect and an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design intended to prioritise range over grouping size and the ideal pairing for the Maple Leaf I-Key. This bucking is compatible with Tokyo Marui-based GBB and VSR platforms, WE and VFC GBBRs and as always, we only recommend upgrade parts for those who are confident working on their platform's internals. If you want to extend your range out to the borderline implausible, the Maple Leaf MR.HOP HOP-up Bucking will do the trick!

If you want your Hi-Capa to shoot like a beast, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols belongs inside. This steel HOP-up chamber should improve consistency and air seal by tightening tolerances between your HOP-up bucking and air nozzle and is far stronger than standard alloy HOP-up units as a bonus. 

Included in the set is an enhanced HOP-up arm, a CNC machined adjuster dial and the legendary Maple Leaf I-Key which is designed to provide a "flat HOP" effect and is ideally used with heavy BBs (0.28g+). Compatibility-wise, this unit is designed for Tokyo Marui Hi-Capa GBB pistols and should fit most other Hi-Capas, though modification and tuning may be required. If you want to use your Hi-Capa as a primary and need range to compete with rifles, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols is ideal!

If you are fixing up your Hi-capa or 1911 you might need one of these! The Slide Stop/Safety Spring and Plunger includes the dual purpose slide stop/safety spring and the plunger for each, making it the perfect replacement set for those who have lost or damaged these parts. All components in this set are constructed from steel, and are designed to fit the Army Armament 1911 and Hi-capa GBB pistols but may fit others based on the Tokyo Marui internal design. 

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

A high quality replacement Hop up rubber, made to 70 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

The Army Armament Green Gas Valve Kit for AA Hi-capa & 1911 GBB is what you need if your magazine leaks from the fill valve or knocker valve. The set includes replacements for both, complete with pre-installed rubber O-rings. 

This set should be suitable for most Hi-capa and 1911 GBB pistol magazines but is specifically designed for Army Armament R26, R27, R28, R29, R31, R32, R45, R501, R601, R603 & R604 magazines. We recommend a valve key for easy installation. Breath new life into your pistol or save money fixing an old mag instead of replacing it!

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags. 

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

This hammer is an original replacement part for the Army Armament R601 JW3 GBB pistol but may also fit other Army Armaments Hi-capa based GBB pistols. A hammer is a great spare to have in the tool kit if you use your JW3 pistol heavily, as over time these tend to wear out due to the repeated impacts on the hammer with every shot. Having a spare hammer on hand for worst-case scenarios can help avoid disappointment and potentially a long wait for replacement parts and allow you to have your pistol back up and running quickly for its next outing.

If you lost a safety from your R28 or R32 1911 GBB pistol, this set should sort you out! The Army Armament Ambidextrous Safety Catches for R28/R32 1911 GBB Pistols includes both the left and right side safety catches, both of which are constructed from alloy. These safety catches are specifically designed for Army Armament 1911 platforms but are potentially compatible with other brands, though you may need to carry out modifications. 

If you have an Army Armament 1911 GBB with a broken nozzle you are in luck! The Army Armament Nozzle for 1911 GBB Pistol is a replacement original part designed for the Army Armament 1911 GBB series, including the R26, R28, R31 and R32 pistols. This nozzle may also work with TM-compatible 1911 pistols from other brands, but as always we only recommend brand mixing for the experts as this may require fine-tuning and modification.

Whether you want to spice up your Hi-Capa with some metallic accents or you need a hard-wearing manual safety which will never let you down, the Airsoft Masterpiece EDGE "ALBATROSS" Ambi Safety for TM Hi-Capa GBB Pistols will do the trick! This manual safety catch set includes the left and right side safety catches, both extended designs for easy access, complete with serrated surfaces for flawless traction. 

The ALBATROSS Ambi Safety is CNC machined from aluminium, giving it a flawless form; exactly what we would expect from a high-end manufacturer like Airsoft Masterpeice. Compatibility-wise, this set is designed specifically for the Tokyo Marui Hi-Capa GBB range but may also fit other brands, though you may need to carry out modifications. Available in a plethora of colour options, from tactical black to metallic purple, the ALBATROSS Safety from Airsoft Masterpiece EDGE is ideal for any build style or aesthetic preference!

Whether you want to spice up your Hi-Capa with some metallic accents or you need a hard-wearing manual safety which will never let you down, the Airsoft Masterpiece EDGE "ALBATROSS" Ambi Safety for TM Hi-Capa GBB Pistols will do the trick! This manual safety catch set includes the left and right side safety catches, both extended designs for easy access, complete with serrated surfaces for flawless traction. 

The ALBATROSS Ambi Safety is CNC machined from aluminium, giving it a flawless form; exactly what we would expect from a high-end manufacturer like Airsoft Masterpeice. Compatibility-wise, this set is designed specifically for the Tokyo Marui Hi-Capa GBB range but may also fit other brands, though you may need to carry out modifications. Available in a plethora of colour options, from tactical black to metallic purple, the ALBATROSS Safety from Airsoft Masterpiece EDGE is ideal for any build style or aesthetic preference!

This is a longer inner barrel for the Novritsch SSP18 pistol. It adds an extra 15mm of length to the barrel. This time, for superior accuracy and power, size absolutely matters... The longer a barrel is, the more time there is for a BB to speed up and spin. This makes it more precise and faster when leaving the barrel, providing you with a more consistent shot so you can dominate your skirmishes with ease.

It is ideal for those who like to use a compensator or suppressor on their SSP18. Unfortunately, due to the extra length, it’s not compatible with most tracer units. This is a technical part and it is only encouraged to install if you are confident in your knowledge and skills.