Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG

Delta Armory
Code:
1,699.00 kr.
  • 6.03mm Tightbore inner barrel
  • ETU/MOSFET, High torque motor, 16:1 CNC gears
  • High-density polymer build - Light and fast!

If you like the integrally suppressed AR look but want something pre-upgraded with more competitive internals than the average, the Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG is the one. This is the ETU-equipped version of the DA-C05 Silent Ops 7, boasting the same strong high density polymer build but with the best internals Delta has to offer currently.

Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response

This marriage of a lightweight beginner-friendly build with top-notch internals makes this a beast of a backup AEG, and perfect for a new or younger skirmisher who seeks no compromise when it comes to performance. If sneaky ARs are your thing, the DA-C05-ETU Silent Ops 7 will see you well-equipped!

Full description

Description

Introducing the Delta Armory DA-C05-ETU Silent Ops 7, an integrally suppressed M4/AR-15 AEG platform boasting Delta's top-of-the-line internals in a lightweight yet strong high-density polymer body. Making use of the same externals as the original DA-C05 but with Delta's ETU series internals makes this the perfect platform for a fast-moving skirmisher who needs a lightweight primary with an ultra-snappy trigger to get the job done. 

Inside the reinforced version 2 gearbox you will find many CNC machined aluminium parts, including the nozzle, piston head and cylinder head. The gears are CNC machined from steel with a 16:1 ratio, providing a rate of fire increase along with the strength to go the distance. The cylinder and spring guide are also CNC machined from steel for flawless air seal and strength, resulting in rock-solid internals with little left to upgrade. 

To keep everything running properly and add some advanced functionality, an electronic trigger unit/MOSFET was added to the formula, providing pre-cocking and the ability to program the fire selector for burst mode and binary trigger, backed up by a high torque neodymium magnet motor to ensure you get the speedy trigger response needed to keep heads down in CQB. This style of AR has been around for a while from numerous manufacturers but the Delta DA-C05-ETU is the best we have seen yet!

Starting at the front end we can find a pre-installed suppressor which covers the 330mm 6.03mm tightbore inner barrel, mounting to the 5.5-inch alloy outer barrel. This gives the Silent Ops 7 the look of an integrally suppressed AR with a compact front end which makes it easy to take corners in CQB. The suppressor mounts to 14mm CCW male threading but due to the inner barrel length, a barrel extension will be required to mount a tracer unit.

Surrounding the suppressor we have a polymer 20mm Picatinny quad-railed handguard with 20mm rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm accessories you choose to add to complete your mission. Styled after the real steel KAC RIS, the handguard has a realistic look and unlike similar integrally suppressed platforms with KeyMod or M-LOK handguards, you will never have trouble mounting mission essentials to the quad rail of the DA-C05 as it doesn't require clearance between the handguard and suppressor. 

The receiver follows the familiar M4/AR-15 format but is styled up with some unique Delta Armory flair. Constructed from high density polymer with angled surfaces and gripping texture on the front of the magazine well, this receiver is rocking the "billet" aesthetic, mimicking real enhanced AR-15 receivers constructed from a single block of aluminium. The finish on the receiver is consistent and strong enough to resist scratches more effectively than most metal receivers, making the Silent Ops 7 ideal for those who skirmish like a bull in a china shop!

The fire selector can be found on the left side, positioned just above the pistol grip for fast access from a firing grip. The selector provides 3 modes of fire; Safe, semi-auto and full auto, with a 90-degree throw between each mode. The modes are all indicated with modern bullet pictograms, with a crossed-out projectile for safe, a single projectile for semi and multiple projectiles for full auto. The magazine release is on the right side of the magazine well and is easily reached from a firing grip with the trigger finger, allowing for super swift emergency reloads and the enviable handling the M4/AR-15 platform is known for.

The mock bolt catch is located in the centre of the left side of the receiver, and while this is a dummy control which doesn't provide a function it is nonetheless a separate part to maintain the realistic appearance and avoid the tell-tale signs of being a replica. The dummy forward assist is present on the right side of the upper receiver, right where it should be. This control does nothing on an AEG, and some real AR shooters argue it does nothing on the real thing, but it is included on the Silent Ops 7 to keep the rifle faithful to real M4/AR-15 rifles.

The charging handle is located at the top rear of the receiver and doesn't need to be pulled before the first shot. It instead serves to retract the mock bolt carrier and open the dust cover on the right side of the upper receiver, giving us access to the rotary HOP-up unit inside. The HOP-up allows you to tune the flight path of your BBs and set the DA-C05 up for different ammo weights, looking for the flattest trajectory possible. The use of the rotary adjuster style is a nice touch and futureproofs the Silent Ops 7 with the most modern HOP-up design for the M4/AR-15 platform, boasting an improved ability to hold its setting under the vibrations of firing and being adjustable in finer increments than the older "gear" adjuster design.

The pistol grip of the Silent Ops 7 boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Based on the real steel "Gunfighter mod.3" grip, a modern ergonomic design, each flank of the pistol grip includes fine texturing for perfect wet weather handling. The trigger guard is built into the receiver, improving strength and allowing gloved fingers easier access to the trigger than the standard AR flat trigger guard. The trigger is known by Delta Armory as the CNC Type A Flat trigger, offering a flat serrated front surface with a short finger ledge, ideal for rapid double taps.

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees no matter what you choose to mount to the plethora of 20mm rails on the Silent Ops 7, the sling plate will be strong enough to support the weight.

The stock itself is a crane-inspired design with a slimline form and a comfortable angled cheek rest, featuring a QD sling socket on either side, together with conventional "footman loops", aka sling slots. With a rubber butt plate featuring lattice checkering, this slimline crane stock stays solidly in your shoulder in any weather conditions but can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks or have a preferred stock in mind for your build. 

The buffer tube also serves as the battery compartment for the DA-C05-ETU. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1300mAh LiPo in stick configuration for the DA-C05-ETU though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock. 

The internals of the CHARLIE series boast more than their fair share of pre-upgraded parts, and there are even more present in this, the ETU version. 

Just like the ALPHA™ and BRAVO™ ETU models, inside the version 2 gearbox, we are treated to CNC 16:1 ratio steel gears running on 7mm bushings, an SHS piston with a full rack of steel teeth, an SHS tappet plate for reliable feeding, and a CNC aluminium piston head, cylinder head and nozzle for maximum long term durability. The cylinder is also CNC machined from steel, as is the spring guide.

These ultra-strong CNC parts are powered by a high torque motor with Neodymium magnets, kept in check by the ETU/MOSFET system. The result is an incredible trigger response and rate of fire, with more than enough range to compete with the big boys out in the woods. The party trick of the ETU/MOSFET is the ability to program the fire controls for burst mode, binary trigger and pre-cocking, giving this incredibly cost-effective setup some functions usually reserved for platforms twice this price!

If you like your primary pre-upgraded but don't want to lug around a metal body all day, the DA-C05-ETU should suit your needs perfectly. It is rare to find a build like this, focussing on pure performance while not compromising handling and agility with unnecessary weight. With a feature set like this, the ETU-equipped Silent Ops 7 is an asset to younger skirmishers with less physical strength or experienced skirmishers seeking a high-performance backup for late in the day when the arms start to burn!

Features

  • 6.03mm Tightbore inner barrel - Great accuracy potential 
  • 14mm CCW Male threaded outer barrel - Tracer/suppressor ready, barrel extension may be required
  • Flip-up iron sights pre-installed - Mounted to the top rail, press textured buttons to flip up
  • 20mm Picatinny quad rail handguard - Compatible with 20mm Picatinny accessories 
  • Extended charging handle latch - Easy access to the HOP-up unit for adjustment
  • 20mm Picatinny railed receiver - Ready for a red dot sight or rifle scope
  • Rotary adjustable HOP-up unit - Easy to adjust in fine increments, holds its setting well long-term 
  • 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type perfectly
  • Low-profile sliding stock - Rubber butt plate for flawless gripping qualities, QD sling sockets on each side
  • Ergonomic pistol grip with reduced grip angle - Great for modern shooting stances, very comfy
  • Reinforced version 2 gearbox - 
    • SHS Piston with steel full tooth rack
    • SHS Tappet plate
    • CNC Aluminum piston head
    • CNC Aluminium cylinder head
    • CNC Aluminium nozzle
    • CNC Steel cylinder
    • CNC Steel quick change spring guide
    • CNC Steel 16:1 gearset
    • 7mm bushings
    • Programmable ETU/MOSFET system 
  • Rear wired - Deans/T-Plug connector - Recommended battery: 7.4V 1300mAh LiPo in buffer tube stick config.
  • Compatible with M4/AR-15 AEG magazines - Plenty of spares available

Package Includes

  • Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG
  • 120rnd Mid-cap magazine
  • User manual 

Specification

General

Weapon Construction External
Weapon Type
Assault Rifle
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 320fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Screwdriver Icon
Pre-Built
Yes
Package
Included Items
Magazine
Skill Level Icon
User Skill Level
Starter, Regular Player,
Patrol Base - Warning Icon
Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.102kg
Weapon Length Collapsed
Length (Collapsed)
72cm
Weapon Length Extended
Length (Extended)
80.6cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Construction Icon
Construction
High density polymer handguard, receiver, stock, pistol grip & suppressor. Alloy outer barrel. Steel sling plate.
Weapon Construction External
External Construction
Polymer
Alloy
Steel
Gearbox Icon
Internal Construction
Polymer
Alloy
Aluminium
Steel

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
M4 / AR-15 / M16, Assault Rifle, M4/AR-15 AEG,
Magazine Style Icon
Magazine Style
STANAG, Long Gun Magazine, Assault Rifle, M4 / AR Platform,
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Programmable
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Right Handed
Weapon Configuration Icon
Weapon Configuration
Standard
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Behind mock bolt carrier, accessible when the charging handle is pulled and held to the rear.

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Flip-Up Ironsights
  • AR Buffer Tube
  • Railed Receiver
  • Sliding Stock
  • Ergonomic Pistol Grip
  • Integrated Suppressor
  • QD Sling Point
  • Ambidextrous Sling Plate
  • Enlarged Trigger Guard
  • Extended Charging Handle
  • Rubber butt plate
Rail System Icon
Rail System
20mm RIS / RAS , 20mm Railed Receiver,
Icon Stock Positions
Stock Setting
Sliding , Multi-Position ,
Weapon Length Extended
Stock Positions
6 Position
Sight Type Icon
Sight Type
Iron Sights , Aperture Iron Sight,
Sling Plate Icon
Sling Options
Buffer Plate , Stock , QD ,

Barrel

Outer Barrel Length (in)
5.5''
Icon Thread Type
Outer Barrel Thread Type
Male
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
14mm
Inner Barrel Diameter
6.03mm
Inner Barrel Length
330mm

Magazine Specific

Magazine Type
Medium Capacity , AEG,
Magazine BB Capacity
Approx. 120 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Gearbox Icon
Gearbox Version
V2 Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Spring Change Icon
Gearbox Quick Change Spring
Yes
Digital Trigger Icon
Gearbox Electronic Trigger
Yes
Split Gearbox Icon
Split Gearbox Design
No
Motor
Airsoft Motor Icon
Motor Type
High Torque
Battery Specific
Battery Connector
Patrol Base | Icon | Deans
Deans
Compatible Battery
Compatible Battery Type
Li-Po
Compatible Battery Configuration
Stick
Compatible Battery Voltage
7.4v

Product Testing Data

Notepad Icon
Test Description
320 FPS +/- 10%
Notepad Icon
Tested Using
0.2g ASG BLASTER
Notepad Icon
Test Date
19/03/2024

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04