Big Dragon

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A fully adjustable mesh lower face mask with a hard armour foam layer which not only makes this mask look amazing, but reduces the likelihood of shattered rounds making their way through the mesh.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

If you need sling swivels, these might work! The Big Dragon Harris-style Sling/Bipod Lugs with Swivels include a pair of Harris-style sling/bipod lugs with self-tapping screw tips and a pair of sling swivels for Harris lugs. The included lugs are ideally used in real wood stocks and will require holes to be drilled for installation. Remember, measure twice and cut once!

The swivels themselves are compatible with pre-installed Harris lugs found on VSR-10, L96, M24 and M40 sniper rifles. If you have one of these rifles with harris lugs pre-installed, simply attach the swivels using the included pins and stash the included lugs away for a future project! Whether you want swivels for your existing lugs or you need harris-style lugs for your real wood-stocked Air Rifle or Airsoft gun, this set is ideal!

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

A compact red/green sight that weighs in at an amazing 55g, making it perfect for speedsofters and snap shooters alike! 

Are you always the last person to finish loading your mags? Are you sick and tired of seeing your mates' impatient looks as you frantically prepare yourself for battle? With a crank wound loader, you can load up a mid-cap in mere seconds, and spend your time more efficiently! This adapter allows you to load up AR36 AEG low and midcaps using a crank wound speed loader. The adapter locks into the M4/AR15 magazine interface in the loader and allows you to insert and load an AR36 Airsoft AEG mag!

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

A classic front sight design that has been around for quite some time in the Airsoft world, this sight is usually found on KAC style replicas such as the KAC PDW, SR-25, and SR-15, but is perfectly suitable for a civilian tactical M4 build or an MK12 SPR build. The sight mounts to a 20mm Picatinny rail and is adjustable for elevation by raising and lowering the steel front blade/post using an M4/AR15 front sight adjustment tool. This sight is very sturdy and well built, making it perfect for anyone who has had bad luck with polymer sights. The sight was intended to be equally effective in use as a primary aiming device as it is as a backup sight for your optic. This sight is incredibly low profile when folded, and is perfect for setups with a big scope that would prevent bulkier flip-up sights from mounting. 

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch. 

An Aluminium constructed folding rear iron sight for 20mm rails which is fully adjustable for windage and elevation.

If you're looking for a compact red dot sight, but want something that looks a bit different to the norm, the Miniature Rifle reflex sight from Big Dragon could be what you need! The Miniature Rifle Reflex sports a crisp, fine 2 MOA dot with 6 levels of brightness adjustment for aiming, and comes with both a low and high mount for 20mm Picatinny rails. 

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.