Army Armament

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A set of replacement/upgrade pistol grips for the Army Armament branded 1911 gas blowback pistols.

If bullpup AUGs weren't unique enough, get a load of this! This AUG carbine is jam packed with features, customisation options as well as having a compact design perfect for those tight CQB encounters. With full metal construction to complete the look, what's not to love?

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament R904 AUG Para is the short-barrelled version of the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The R904 boasts full metal construction, a pre-installed MOSFET and an integrated 3x optical sight, and is a more modern iteration of the AUG with plenty of 20mm rails for the addition of accessories. Join the elite, equip yourself with an AUG and benefit from the improved handling, short length and long barrel of this fantastic Airsoft AEG version of a near perfect real world design!

A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.

If you've lost a safety catch for your Army Armament Hi-Capa, you're in luck! The Army Armament Ambidextrous Safety Catches for Hi-Capa GBB Pistols are constructed from alloy and an original replacement parts set, meaning you shouldn't have to carry out any mods when installed in an Army Armament Hi-Capa. The set includes both the left and right-hand manual safety catches. 

If you need something GLOCK 19 sized but the blocky look of the European pistol doesn't satisfy your needs, take a look at the Army R607. The R607 is a compact Hi-Capa pistol sporting handy size along with aggressive styling; with a ported slide, stippled pistol grip, and attractive angular slide serrations this pistol definitely looks like it means business!

The Army Armament R902 Aug Military Model Railed AEG is an iconic replica of the Austrian military rifle. It is certainly one to add to your assault rifle collection. It has also been seen in Australia and New Zealand and was also wielded by Karl, the mercenary companion to Hans Gruber during their attempted takeover of Nakatomi Headquarters in the 1988 movie Die Hard.

The R902 boasts full metal construction, a long inner barrel and an integrated 3x optical sight, it is a more modern iteration of the AUG with the addition of multiple 20mm rail sections for accessories not commonly associated with AUG platforms, such as flashlights, lasers and backup sights. Join the elite, equip yourself with an AUG and benefit from the improved handling, and the long barrel of this fantastic Airsoft AEG version of a near-perfect real-world design!

Fix up your old mags with Army Armament Magazine Followers! This teeny, tiny part tends to take its fair share of wear and tear during long-term use and is a great replacement to have on hand if you have plenty of Army Armament Hi-capa mags at your disposal.

This is a replacement original part designed for Army Armament Hi-capa, JW3, JW4, R504/604 and R608 magazines to name but a few, but may also work with other brands' mags, though we can't confirm this. If you are having feeding issues, replacing the follower is far cheaper than getting a new mag!

If you have hammer issues with your Army Armament Hi-Capa, this should help! The Hammer and Strut for Hi-Capa GBB Pistols from Army Armament is constructed from Aluminium and an original replacement part for the Army Armament Hi-Capa GBB series, including the R501, R504, R603, R608, R609 and potentially others. The set includes both the hammer and hammer strut and should be compatible with most TM clone Hi-Capa pistols, though it may need mods for anything other than Army Armament 'Capas. 

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

For all you secret agents out there, looking for a concealed carry, this is the one for you. But don't let it's compact size fool you, it still packs a punch with a satisfying gas blowback recoil.

This 1911 style pistol from Army Armament, which is ideal for those who love a lightweight, compact design and is also perfect for roleplay skirmishes.

Need to shoot faster with your 1911 GBB pistol? This is what you'll need! Compatible with any 1911 variant which has removable sights via a dovetail cut in the slide. Works great with a red fibre front sight.

AR36 Airsoft Magazine Adaptor! Change your AR36 Mags to AR-15 ones with this super easy mag adaptor! Simply pop this onto your receiver via the body pin of your AR36 and you're good to get using some AR-15 / M4 Magazines in your AR36! No more having to stock up on loads of mag variants, now you can even mag share with your M4 Airsoft Friends!

A Spare pair of feed lips for your Army Armament 1911 Gas Airsoft Pistol. To fit this simply remove the pin that retains your current feed lips, pop the old lips out, seat the new pair in & back in the pin goes! Job done. Do be careful though, the main reason feed lips break is due to the follower being let go when loading instead of being guided, this results in an impact and the feed lips aren't designed to withstand physical damage and it may crack them.

The Army Armament Green Gas Valve Kit for AA Hi-capa & 1911 GBB is what you need if your magazine leaks from the fill valve or knocker valve. The set includes replacements for both, complete with pre-installed rubber O-rings. 

This set should be suitable for most Hi-capa and 1911 GBB pistol magazines but is specifically designed for Army Armament R26, R27, R28, R29, R31, R32, R45, R501, R601, R603 & R604 magazines. We recommend a valve key for easy installation. Breath new life into your pistol or save money fixing an old mag instead of replacing it!

This hammer is an original replacement part for the Army Armament R601 JW3 GBB pistol but may also fit other Army Armaments Hi-capa based GBB pistols. A hammer is a great spare to have in the tool kit if you use your JW3 pistol heavily, as over time these tend to wear out due to the repeated impacts on the hammer with every shot. Having a spare hammer on hand for worst-case scenarios can help avoid disappointment and potentially a long wait for replacement parts and allow you to have your pistol back up and running quickly for its next outing.

The R31-C Gas powered Airsoft Blowback Pistol is a replica of the infamous 1911 design, in traditional layout without any exuberant furniture, compensators or graphics, just good old fashioned, old school cool.

A silicone rubber seal designed to fit on the bottom of your Hi Capa magazine internally, to replace old and work out seals and reduce leaks. With a properly fit and lubricated seal you should never experience a leak again, just ensure you coat the seal in silicone based lubricant prior to fitting it, and be gentle! These things may snap under too much tension.

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

An alloy constructed thread adapter for Army Armament branded Airsoft pistols with a 12mm CCW female threaded outer barrel. If own an Army Armament pistol with a female thread on the outer barrel and want to install a suppressor, tracer unit or other muzzle device, then this is the adapter you require. It comes supplied with a knurled thread protector to prevent damage to the threads (and look awesome) when a muzzle device is not installed.

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

An excellent addition for Airsofters with a 1911 as their sidearm, this is a 25 round capacity gas blowback magazine designed for the Army Armaments 1911, but is also compatible with many other designs. 

If you have a Hi-Capa-shaped hole in your soul but demand realism, the EMG R613 STACCATO 2011 Hi-Capa XL GBB is what you need to fill it. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 XL, complete with licenced trademarks across the design in engraved, laser engraved and embossed form. 

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO XL is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with high-end styling which doesn't look like everyone else's, the R613 STACCATO 2011 Hi-Capa XL GBB from EMG will be an asset to your loadout!

If you love the looks of high-end real steel Hi-Capas, the STACCATO C2 from EMG should have you drooling! This ultra-compact Hi-Capa 3.8 boasts full metal construction and licenced trademarks from STACCATO Firearms, giving it an elite look far beyond its price point! 

Externally, the STACCATO C2 is equipped with an optics-ready slide with an RMR footprint red dot mount plate pre-installed, a light enhancing front iron sight paired with an anti-glare rear sight, forward slide serrations and an undercut trigger guard, providing everything a modern 'Capa build needs to compete with the best on the field. 

Inside, the STACCATO C2 GBB is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. This is definitely one of EMG's best GBB pistol releases yet! If you're seeking a sidearm with a more compact form than the average with no performance compromises, the EMG R612 STACCATO 2011 Hi-Capa C2 GBB fits the bill perfectly!

If you're looking for the hottest Taran Tactical Innovations platform around, the Army Armament Alpha Race Hi-Capa GBB Pistol is exactly that. Licenced by TTI and covered in gorgeous laser-engraved trademarks, this full-metal Hi-Capa is patterned after the real steel Alpha Race, the Pit Viper on steroids!

At the front, we have the mighty Alpha Race compensator, an extended version of the Sand Viper comp to provide that lean and mean high-speed race gun look. The grip boasts aggressive stipple texture and a substantial flared magazine well; both prerequisites of a pistol designed for pure speed against the clock.

Like Army Armament's other recent pistol releases, the Alpha Race is also equipped with a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If your mates are all running TTI pistols and you want the biggest, baddest TTI pistol platform yet, the Army Armament Taran Tactical Innovations Alpha Race Hi-Capa GBB Pistol will make them all jealous!

If you want a Hi-capa that is the pinnacle of modern handgun design, the upgraded Sand Viper GBB Pistol is definitely worth your scrutiny! This slick new combat-optimised Hi-capa platform boasts full metal construction, a pre-installed compensator and an optics-ready slide, complete with an RMR/Docter footprint mounting plate. This latest batch of Sand Vipers is equipped with CNC aluminium slides and steel hammer group components, giving them a superior finish and design over the already impressive original version when it comes to build quality.

Being officially licenced by Taran Tactical Innovations, this pistol is rocking full TTI trademarks just like the real sidearm. It is finished in the sandy coyote bronze finish from which the sidearm's name ''the Sand Viper'' is derived. If you are looking for an optics-ready Hi-capa with a unique look and a high-class real steel lineage, the upgraded Sand Viper is absolutely worthy of filling your holster!

The JW3 Combat Master is back and it's better than ever before! The Army Armament TTI JW3 Hi-Capa Combat Master; Upgraded Version boasts a CNC machined slide and frame, steel hammer group parts and a redesigned cold-resistant nozzle, resulting in the best pre-built JW3 we've handled yet. 

Naturally, the Upgraded JW3 is full metal, just like the original, but its super fine CNC machining really makes the details pop, with a varied finish on the slide serrations which matches the real thing perfectly. The usual JW3 compliment of enhanced externals is still present, including its light-enhancing iron sights, flared magazine well, trigger guard undercuts, extended mag catch and stipple textured grip. As with the original, the Upgraded JW3 handles like a dream!

Whether you're into licenced John Wick replicas or you love a flawlessly made Hi-Capa, the Army Armament TTI JW3 Hi-Capa Combat Master; Upgraded Version is a fantastic choice with more than its fair share of premium perks!

An upgrade or replacement stock sear spring for gas blowback pistols. The spring is made of robust steel and therefore will hold its shape better than stock springs, which is perfect for keeping your trigger action to be short and crisp. Due to the springs high tolerance, there would be no need to shave it down to fit in your grip.

The Army Armament R603 is a Hi-Capa Platform Airsoft Gas Blowback Pistol, made to a realistic standard using Alloy for the externals, with the exception of a Polymer Stippled Pistol Grip. If you're looking for a compact and deadly sidearm that can perform in cold weather, than the R603 will be right up your street.