All Two-Tone Airsoft Guns

If you are wanting to get into Airsoft skirmishing, look no further than the CM.125, a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent. 

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into action right away.

Constructed with an alloy mock slide and polymer frame, the CM.125 is lightweight and efficient at both semi and full auto, this pistol has everything you need to get started with your first Airsoft sidearm!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours. 

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you're into revolvers and seeking an affordable way to satisfy your need, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is styled after the real steel Colt Python and operates just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger.

Being a revolver, the HG-132B will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132B nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever but don't want to spend big to fill that void, the HFC HG-132B Python 4" NBB Gas Revolver is the best way to go!

If you're in the market for what is probably the most iconic SMG design the world has ever known but you want it cheap, the Jing Gong JG069 SMG-5J SMG AEG should suit you perfectly. This SMG-5 AEG replicates one of the most modern SMG-5 variants, the "J" model first issued to the Japanese Armed Police, and is constructed predominantly from high density polymer to keep the build light, agile and affordable. 

Internally, the JG069 is based on the Tokyo Marui SMG-5 A5, meaning full compatibility with aftermarket upgrades for its basic yet functional alloy version 2 gearbox. All of the iconic SMG-5 details are present externally, including its claw-mount compatible receiver, tri-lug muzzle device and ambidextrous fire controls. If you need an SMG-5 in lightweight and cost-effective form, the Jing Gong JG069 SMG-5J SMG AEG is exactly that!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you want to play Airsoft with a realistic full metal platform or have you had your eyes on an iconic MK18 platform, either way, the Specna Arms SA-E19 EDGE™ Daniel Defense® MK18 M4/AR-15 AEG; Kestrel Basic ETU should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups.

Being an AEG of the EDGE™ line, this Specna Arms MK18 is great straight out of the box, boasting 18:1 ratio steel gears, a Kestrel Basic ETU, a quick change spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness.

With more Picatinny rails than you'll ever need, a unique modern receiver design and the large battery space of an M4 Crane stock, the SA-E19 EDGE™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

Maybe you aren't a fan of the ever-increasing pile of fancy slide cut shiny hi-capas? For the discerning gentleman who likes his sidearm to be a sidearm, this Army 1911 is the one. Featuring a full metal frame, slide, and outer barrel, the noise this thing makes when fired is very satisfying! The classic 1911 design aesthetic coupled with more modern MEU style sights and a wrap-around ergonomic grip means the R27 provides all the necessary enhancements but without any unnecessary additions ruining the pistol's simplicity, for which it is famous.

Maybe you aren't a fan of the ever-increasing pile of fancy slide cut shiny hi-capas? For the discerning gentleman who likes his sidearm to be a sidearm, this Army 1911 is the one. Featuring a full metal frame, slide, and outer barrel, the noise this thing makes when fired is very satisfying! The classic 1911 design aesthetic coupled with more modern MEU style sights and a wrap-around ergonomic grip means the R27 provides all the necessary enhancements but without any unnecessary additions ruining the pistol's simplicity, for which it is famous.

Maybe you aren't a fan of the ever-increasing pile of fancy slide cut shiny hi-capas? For the discerning gentleman who likes his sidearm to be a sidearm, this Army 1911 is the one. Featuring a full metal frame, slide, and outer barrel, the noise this thing makes when fired is very satisfying! The classic 1911 design aesthetic coupled with more modern MEU style sights and a wrap-around ergonomic grip means the R27 provides all the necessary enhancements but without any unnecessary additions ruining the pistol's simplicity, for which it is famous.

For those of you looking for a budget friendly sidearm, the ST92F make for a great backup pistol, being both lightweight and quiet due to it being non-blowback.

Constructed from lightweight but high density polymer, the pistol features a TDC adjustable HOP which is unusual for a sidearm at this price range.

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

If you like your Hi-capa to go far and fast, the Novristch SSP2 has your name on it! This unique Hi-capa platform design was developed by Novritsch's tech team in Austria, boasting some of the most thoughtful improvements we have seen in the Hi-capa design, with a focus on pure performance. 

The SSP2 is rocking a fixed outer barrel for improved accuracy and a semi-split slide for improved cyclic rate and gas efficiency, pairing perfectly with the TDC adjustable HOP-up unit, 6.03mm tightbore inner barrel and Maple Leaf silicone HOP-up bucking for a real beast of a pistol with unheard of accuracy and range. On the outside, the SSP2 is also something special, with a unique look which cannot be mistaken for anything else. If you run pistol only or you need a long range sidearm solution, the SSP2 will be a true asset to your kitlist. 

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA MOSFET Edition line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a type 1 cylinder and a polymer piston with a full steel tooth rack. Tying this selection of high-end internals together is the CYMA Zeus MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

Those in search of a modern AR with a long range leaning, check this out! The DA-A15-ETU ALPHA™ 13" M-LOK M4/AR-15 from Delta Armory brings the cutting-edge styling of the slickest real steel M4s out there along with pre-upgraded internals pushed to the max, making it a serious foe to face down with in an outdoors environment.

As with the other ALPHA™ line AEGs from Delta, the DA-A15-ETU boasts full metal construction with flawless machining throughout, but unlike standard ALPHA™ AEGs, this one is the ETU version. Delta's ETU AEGs are even more upgraded than the standard ALPHA™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. Whether you are going full DMR with this build or using it as it comes, you are very well equipped for long range warfare with the DA-A15-ETU!

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

If you dream of an Airsoft juggernaut loadout, this is the primary you need! The WE23-L Rotary Minigun AEG; Arm-mounted is another unique design from Well, part of its "PRO" line of high-end AEGs and based on the positively epic WE23-S. The -L model replaces the standard pistol grip and handguard with a wrist brace and forward-mounted grip; allowing you to wild this monster with a single hand and opening up the opportunity to dual-wield and bring unrivalled firepower to your next skirmish.

On the inside, the WE23-L is rocking the same awesome internals as the -S model. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

Hitting out at a phenomenal 36 rounds per second on an 11.1V battery with an autowinding 1200rnd high-cap on tap, the WE23-L Arm-mounted minigun is without equal when it comes to in-game firepower and is built like a tank as a bonus, making use of some of the best machining and strongest polymers we've seen on an Airsoft gun. Whether you're working on a CWIS loadout, a juggernaut kit or just want to make lots of enemies at your next game, the WELL PRO WE23-L Rotary Minigun AEG; Arm-Mounted is your ideal primary!