Airsoft Magazines

A 20 Round Green Gas Powered Magazine designed for the GLOCK 19X by UMAREX.

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

This is a Spare Magazine for the G&G Armament Piranha Gas Blowback Airsoft Pistol, constructed from tough Alloy to the original specification. It is filled with BBs using a Speedloader and has Gas inserted from the baseplate via the Inlet Valve. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer, rather than scurrying back to the Safe Zone to reload.

Suppose your Tokyo Marui Saiga-12K needs some spare magazines to keep it fuelled during a skirmish, the Tokyo Marui 45rnd Saiga-12K Magazine is exactly what you're searching for! This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!

The magazine holds 45 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To load this magazine, you have to use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.

The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine.

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

A replacement or spare Gas Tank for the Golden Eagle Type 870 Series M870 Gas Airsoft Shotguns. Made to the original specifications, this Gas Tank will pop into the Stock of a Type 870 Series M870 Gas Shotgun and keep you in the fight for longer. If you own a Gas Golden Eagle M870 and want to carry Spare Tanks rather than a large Bottle of Gas in the field, then these Gas Tank replacements are ideal for you.

A Green Gas powered Spare Magazine for the ASG STI Combat Master Pistol. If you own one of these Sidearms, chances are you're a fan of the film. If you're a fan of the film, chances are you're going to want to fling Magazines all over the place. Stock up on Spare Mags today to give you the best chance of avenging your pupper, and so you can spend more time playing, and less time back in the safe zone reloading.

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

If you want some awesome realistic-looking mags and you're running a CGS or TM MWS system GBBR, fill your rig with these! The EMG 30rnd Magazine for CGS & MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui MWS system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the bottom of the polymer Lancer Systems L5 AWM Magazine style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs.

A 27rnd spare or replacement gas magazine for G&G's latest line of GPM92 gas blowback pistols.

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

A spare magazine for the Gas Blowback submachine gun; the WE SMG-8, and the WE SMG-A1 (Also known as the New Wave - NP7).   

*Please note that this magazine is not compatible with the Tokyo Marui SMG-7

If you're rocking the WELL PRO WE06-GM PPK-20 GBB SMG, these are what you need to keep the recoil thumping! The WELL PRO 38rnd Green Gas Magazine for WE06-GM PPK-20 GBB is constructed with an alloy shell and polymer feed lips, replicating the shape of the real steel PPK-20/PP-19-01 magazine flawlessly.

The mag can be loaded through the feed lips at the top using a speed loader or by hand, though this is much easier if you pull the follower on the front down to relieve spring pressure. The gas fill valve is concealed beneath the stamped steel baseplate; simply lift the bottom section of the follower up and slide the baseplate off to the rear to access the valve. This magazine also features a "Bolt stop" mechanism, giving you the "dead man's click" when your mag runs dry, just like the real PPK-20!

If you have the desire to dump 350 rounds in one long burst from your GBB pistol but you don't want to go the HPA route this is your chance! The WE Europe 350rnd Green Gas Drum Magazine is designed for WE's GBB EU series which means it will also work in the Action Army AAP-01.

The magazine is constructed with a hefty alloy gas reservoir with a high density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you go pistols only and you need extra firepower to compete, this will suit you well!

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

A gas blowback magazine designed for the WE Europe EU-Series compact pistol range, and is designed to fit the EU26, EU27, and the EU33 Advance with the grip extension removed. The magazine is constructed from Alloy, with a Polymer base plate, feed lips and follower, and comes fitted with a unique curved base plate.

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

A CO2 magazine in that holds up to 25rnds at a time. CO2 powered the 12g bulb is stored in the bottom of the magazine with an easy to release base plate and easy access CO2 base plate. 

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!