Airsoft Magazines

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A Mid-Capacity Magazine for AR Platform Rifles (such as AR-15, SCAR, TAVOR, ARX100), that is filled using a Speedloader to fill BBs through the top of the Mag. It will then quietly and effectively feed BBs into your Gun until empty, with no rattle unlike High-Cap Magazines. With an attractive hex pattern, this is an eye-catching Magazine that looks great in any AR Platform Airsoft Gun. Not only this, but it is compatible with Tokyo Marui (TM) Replicas too.

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

If you own an AR-9, whether it is G&G's ARP9, PCC9 or one of Classic Army's X9 series, this will be of interest! Introducing the EMP-AR9 magazine from PTS, the number one name in Airsoft aftermarket enhanced magazines. The EPM-AR9 sports high strength Dupont Zytel polymer construction and a strong feed spring, guaranteeing that it will keep up with even the highest rate of fire builds! The magazine also features a bright orange follower so you can clearly see when the magazine is empty, and a witness window on either side to indicate when the magazine is at full capacity.

A Polymer constructed Mid-Cap Magazine from KRYTAC which holds a total of 150rnds and is built to the usual high standard that you would expect of a KRYTAC product.

The perfect magazine to give you the ultimate fire-power and suppression from your G&G AP-9 AEG. Incredibly satisfying to hold and use thanks to the very thick and robust polymer construction.

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

Are you looking for some cheap mid-caps to feed your Airsoft AEG? Well, you're in luck! The Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs is an affordable solution that allows you to skirmish for longer without needing to refill magazines constantly. Its mid-cap design means that all the BBs are fed without the need for winding, plus, there is no "battle rattle".

The steel outer shell of this magazine ensures that it is strong enough to survive the rigours of a rough battlefield, keeping the polymer internals and steel feed spring safe, so you can be sure that your magazine will always be reliable. The magazine shape is based on the STANAG design, the iconic European design and features grooves on its surface for better gripping and faster reloads, in all weather conditions.

Keep your Airsoft rifles well fed with the affordable Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs, and you'll be sure to outgun all those who oppose you on the battlefield.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A Mid-Cap Magazine for compatible AK Platform Airsoft Electric Guns, which holds a total of 130rnds, but can be switched to a realistic capacity of 30rnds.

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.

Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!

If you need a full load of magazines as cheap as possible, this is your opportunity! This awesome value box of ASG 140rnd Mid-cap Magazines is perfect if you need a complete loadout for a long game day and is also great to split between friends if you only need a couple of mags each. The magazines themselves are constructed from polymer and are designed to match real steel STANAG magazines, meaning they should fit and feed in most M4/AR-15 AEGs as well as SCAR-L and 416 AEG platforms. 

Each magazine holds 140 BBs and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. Being mid-caps, you won't give yourself away with "battle rattle" if you like to move quickly, and the lightweight polymer construction of these mags means your loadout should be nice and light, great for extra agility when compared to metal mid-caps! 

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

If you're looking for an affordable mid-cap magazine that holds more BBs than most others at its price point, then you should consider the Double Eagle 220rnd Mid-Cap Magazine for M4/AR-15. Unlike high-cap magazines, all 220 BBs can be shot without winding a wheel, as the BBs are loaded straight onto the spring.

The shell is constructed from a high-density polymer, making it durable and scratch-resistant. The spring within the mag is made from steel, guaranteeing reliable feeding due to its strength. To load the magazine, insert BBs straight into the feed lips using a speedloader. 

The magazine has unique texturing on it, showing eccentric lines designed for optimal gripping when reloading. The magazine is also covered in fine squiggly line texturing, which promotes a strong grip even in wet weather conditions. If you need an affordable magazine with an impressive capacity, this is the one for you!