Airsoft Magazines

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.

Looking for Grease Gun mags? The Snow Wolf 520rnd High-Cap Magazine For M3/M3A1 Grease Gun AEG is authentically built with a steel shell and is a wheel wound high cap magazine which holds 520 BBs. The magazine can be loaded through the fill window at the top of the magazine body by pouring BBs straight in and the winding wheel is located on the baseplate and needs to be wound up to tension the mag.

This magazine is compatible with the Snow Wolf M3 and M3A1 Grease Gun AEGs but may not be compatible with other brands.

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. 

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

A medium capacity (mid-cap) magazine designed for use with Airsoft 6mm Electric Guns (AEG). The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The BB guide of the magazine is coloured bright orange, allowing you to see the amount of rounds remaining, from the top, side and lower part of the magazine, allowing you to pick up the mag and letting you know exactly how many rounds are remaining.

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

If you're running an M82A1 AEG, you need some spare mags for it, and AEGs work best with high-caps, right? This mag from Snow Wolf has a whopping 500 round capacity and is wheel wound from the bottom so you won't be switching mags any time soon.

Constructed from lightweight polymer, this mag helps keep the weight of your huge Barrett down. So grab this mag and start picking people off en masse!

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading. 

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

If you own the EMG TTI JW4 Gen-12 Automatic Shotgun, you will definitely need some spare magazines. The full-automatic capabilities of that shotgun eat all your ammo reserves within the blink of an eye. A Double Bell 900rnd Hi-Cap Magazine For GEN-12 Series will provide you with another 900 BBs so you can carry on your operations for longer. 900 BBs is no joke, it's basically a whole bottle of BBs in one magazine!

This magazine is a high-cap variant, evidenced by its huge 900rnd capacity. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for quick reloads to stay in the fight. The magazine is constructed from high-density polymer and features a matte black colour and some texturing for a satisfying feel and for ease of loading.

A Full Polymer constructed Mid-Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to inject more realism into their play-style.

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours. 

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard! 

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

Need some extra firepower for your SMG-5 AEG? The NUPROL 2500rnd C-Mag Double Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer and is styled after the well known Beta C-Mag, designed by Jim Sullivan and manufactured by the Beta Company.

The advantage of the Beta C-mag design is that it provides immense capacity without preventing the shooter from getting nice and low in the prone position due to its dual drum layout. This example is an autowinding drum magazine which can be wound using the button on the front, meaning less work for your busy fingers in game!

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

If you need mags for your AK and you like them modern, the Specna Arms S-Mag is a fine choice. This variant of the S-Mag is constructed from strong high-density polymer and designed for the Specna Arms J-series but will also fit and feed in most other Airsoft AK AEGs. Being a spring-loaded mid-cap, this magazine won't rattle as you run but boasts a respectable 175 BB capacity so you can shoot more and rack up more kills. 

Loading the S-Mag is the same process as with other mid-caps: fill through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool. The external shell of the S-Mag also boasts SA texture on each side to improve grip and provide unique looks. 

NUPROL bring us another variant in the ever popular AK magazine range. With lightweight polymer construction, this mag is that of a mid-cap magazine, meaning that the magazine is filled at the top using a speedloader. Being a mid-cap means that there is no 'battle rattle' meaning that no BBs can be heard rattle around in the mag during skirmishes unlike high-cap magazines.

Holding 70 rounds, this mag has a somewhat unique design as it has a smooth and glossy black aesthetic, that would complement more modern AK loadouts perfectly. The low price point only makes these mags that bit more appealing!

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

Looking for more firepower from your AK AEG? NUPROL have just the thing! The 3500rnd Electric Drum Magazine is designed to work with AK47/74 AEGs and provides a serious volume of fire advantage with auto winding functionality. The drum is styled after the real steel RPK drum magazine but being constructed from high density polymer keeps the weight low and makes volume of fire far more affordable. If you have an AK and a heavy trigger finger you need one of these!

If you are running the Well WE23-Mini you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 600rnd Magazine for WE23-MINI Minigun holds 600 BBs and winds itself via the internal motor of the Minigun itself, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

Looking for AK74 magazines for a modern loadout? The 200rnd Mid-cap from NUPROL is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool.

The advantage of mid-cap magazines is that they have no "battle rattle" so your mag won't gve away your position as you traverse the battlefield. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or RPK74 AEG but will fit and feed in most AK platform AEGs.