All External Airsoft Parts & Attachments

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

This Airsoft tracer unit is designed to fit onto threaded outer barrels of Airsoft guns to allow the use of illuminated Airsoft Tracer BBs. 

The ASG B&T tracer unit comes with a 14mm CCW thread that will attach to 90% of AEGs, and will attach to the remaining 10% with a thread adapter. The unit has an easy to operate on / off button switch and textured outer shell for easier fitment onto your Airsoft RIF.

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

If you want to turn your local CQB site into a nightclub while you send rainbows of death at the enemy team the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need! This device can be used as a standard tracer unit, a tracer with a muzzle flash effect with 7 different colours to choose from, and of course, in the rainbow flash mode which lights up the first meter or so of the BB's trajectory with a dazzling rainbow effect. Just wait until you see this thing in action, it is positively EPIC!

This is the latest generation of the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns, meaning it works a little differently than the original model. The activation button is now on the front, and the tracer collar includes relief cuts to allow for shotguns with full-length magazine tubes and iron sights mounted directly to the barrel.

This device is intended for use with tri-shot Airsoft shotguns but comes with a 14mm CCW thread adapter and an adapter for 16mm unthreaded barrels. The default mounting mechanism is compatible with unthreaded shotgun/sniper rifle outer barrels of between 19mm and 24mm outer diameter, giving you an unprecedented amount of flexibility all in a single unit. If you want the enemy team to taste the rainbow, the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need!

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

If you want that "I just triple tapped Bin Laden in the face" look, you probably already have an MP7, but you will be needing the suppressor to match. Introducing the H&K licensed suppressor for the MP7 by Umarex, a Quick detach suppressor with a foam filling for added suppression effect.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable.