Airsoft M4/AR-15 Magazines

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.

This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!

Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

Looking for a real cap magazine for Milsim that can double as a mid-cap for regular Airsoft skirmishes? The DMAG from D-Day is a high-density polymer magazine, styled after the latest "416" style magazine, complete with reinforcement ribs on either side and a redesigned shell shape to prevent the magazine from being over-inserted during a fast reload and damaging your HOP-up unit. This magazine is constructed with a high-density polymer shell and polymer internals with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine.

Looking for a real cap magazine for Milsim that can double as a mid-cap for regular Airsoft skirmishes? The DMAG from D-Day is a high-density polymer magazine, styled after the latest "416" style magazine, complete with reinforcement ribs on either side and a redesigned shell shape to prevent the magazine from being over-inserted during a fast reload and damaging your HOP-up unit. This magazine is constructed with a high-density polymer shell and polymer internals with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine.

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.