Viewing 44 of 44.
grid
list
119.00 kr.
  • 30rnd Capacity
  • Transparent polymer construction
  • Keep tabs on your remaining ammo

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

169.00 kr.
  • 5 Pieces
  • For Kar98k
  • Spare Shells

A pack of 5 replacement shells for the DBoys Shell Ejecting Kar98. The shells themselves are constructed from Alloy and are shiney silver. 

99.00 kr.
  • 25rnd Capacity
  • For M1903/K98K
  • Slim / Low Profile

A spare/replacement Magazine for the S&T M1903A3 and KAR98K Rifles, holding a total of 25rnds and being filled using a Speedloader. These lightweight and low profile Magazines are super easy to carry on your person, and will be the difference between holding your position until endex (end of the game), or walking back to the Safe Zone early to reload.

99.00 kr.
  • 22rnd Capacity
  • For Well MB Series
  • Spring Ejected Mag

A 22rnd magazine for the Well MB series of spring-powered Airsoft sniper rifles.

129.00 kr.
  • 22rnd Capacity
  • Translucent polymer construction
  • For Novritsch SSG96 MK1 & MK2

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

359.00 kr.
  • 29rnd Magazine
  • For KC-02 Rifle
  • CO2 Powered



A CO2 gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With an ammunition capacity of up to 29 rounds. 

99.00 kr.
  • 25 Round Capacity
  • Low-Cap Magazine
  • For Steyr SSG 69



A spare magazine for the ASG Steyr SSG 69 P2 Spring Powered Airsoft 6mm Sniper Rifle.

49.00 kr.
  • 25rnd Capacity
  • Carry More Ammo
  • For Double Eagle M61

A spare magazine for the Double Eagle M61 Spring Powered Airsoft Sniper Rifle, which holds a total of 25rnds, and is the perfect way to stay in the field for longer without having to return to the safe zone to reload. If you own a Double Eagle M61, you'll want plenty of spare Mags, so you don't have to leave that sweet position you just found.

269.00 kr.
  • 24 Round capacity
  • Green gas magazine
  • Hard rubber gas router

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

59.00 kr.
  • 29rnd Capacity
  • Compact size
  • For Double Eagle M62 Sniper Rifle

This magazine is a direct replacement for the original Double Eagle M62 magazine which came with it. The magazine is constructed from polymer and is fed by a spring meaning no rattle. The magazine holds up to 29 rounds, and is a great spare or replacement, or perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer.

319.00 kr.
  • 32rnd Capacity
  • Hard rubber gas router
  • Compatible with most Mk23s

The Novritsch 32rnd Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

139.00 kr.
  • 28rnd capacity magazine
  • Translucent polymer construction
  • Compatible with Novritsch SSG10 Full Thrust platforms

The Novritsch 28rnd Full Thrust Magazine for SSG10 Sniper Rifles is designed to hold exclusively 6.44mm BBs. It does not hold regular 6mm BBs. It is constructed from a translucent polymer which is perfect for quickly checking how much ammo you have remaining before a reload is due. This magazine can only be filled with a Novritsch Full Thrust BB Magazine Speed Loader as no other speed loader can hold 6.44mm BBs.

The magazine is single-stacked and holds 28 Full Thrust BBs. This may seem like a small amount, but for a talented marksman, this is more than enough to dominate the skirmish field. 

89.00 kr.
  • 26rnd capacity 
  • Polymer construction
  • For Type 38 & 97 Sniper Rifles

Do you need a couple of spare magazines for your Type 38 or Type 97? This is exactly what you are looking for! It is a direct copy of the magazine that comes with the Arisaka rifles and therefore it will be a guaranteed fit. This does however mean that it is ONLY compatible with these rifles and no others.

It is constructed from a high-density polymer and holds 26 BBs, it's the perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer. Its spring-fed design negates the "battle rattle" effect, allowing you to stay sneakier!

89.00 kr.
  • Polymer Construction
  • Fits the Urban Sniper
  • Holds 30 Rounds

The ASG Urban sniper spring sniper rifle magazines made from Polymer and holds up to 30 6mm Airsoft BBs at a time. Easy to adjust with a side press button release catch and compact for easy storage during mid game use. 

The perfect option for snipers who want to spend more time concealed in their hide and less time frantically scrambling around for a speed loader to reload their magazines - giving away your position. 

If you're a true Sniper, then each one of these magazines has a potential for 20 kills.

About Our Airsoft Sniper Magazines

Become the ultimate marksman with airsoft sniper magazines. Compact, lightweight and easy to carry, our mags are ideal for the stealth sniper that likes to change position throughout the skirmish. With our high capacity sniper mags, you don’t have to worry about saving your bullets, and can support your team in taking out plenty of your opponents. 

Even if you’re not looking for extra capacity, our sniper magazines are great for avid skirmishers that prefer having spares to getting caught out. 

With Airsoft sniper magazines from popular brands including ARES and CYMA, you know you’re getting the best quality on the market when you shop with Patrol Base. 

Looking for more accessories to upgrade your sniper game? Improve stability with our Airsoft bipods or keep your fire intact with a new sniper trigger. We even offer long range sniper scopes offering 7x+ magnification, so you can see the whites of your enemy’s eyes before you pull the trigger. 

If you’re looking for a high-quality spring gun spring with an elongated lifespan, our thermally treated springs are the perfect choice. Their ability to avoid wear and tear makes each operation as smooth as the last. For the ultimate spring rifle upgrade, it’s a good idea to consider a new Airsoft sniper trigger box too, as this will eliminate any firing wear and tear.