Airsoft Mounts

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you're searching for a sling mounting solution for your M4/AR-15 AEG, the Delta Armory CQD Sling Plate for M4/AR-15 AEG is ideal. Constructed from steel for maximum strength, this CQD-style sling plate allows you to mount a single-point sling to either side of your sliding stock M4/AR-15 AEG, ideal for left or right-handed shooters. The plate can also be paired with a front sling point if you prefer a two-point sling. Compatibility-wise, this plate should fit any Marui-spec M4/AR-15 AEG with a sliding stock but won't work with fixed stocks or PDW stocks.

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

If you've been working with an improvised sling solution for your VMP-1, time to get professional! The VORSK Sling Plate for VMP-1 GBB SMGs is constructed from steel, mounting between the stock and receiver at the ideal spot for a single-point sling. The plate includes a keyring extension for more flexibility but this can be removed entirely if not needed or replaced with a loop of paracord for a stealthier alternative. 

When installed, the sling loop is centrally positioned below the stock, granting it ambidextrous functionality, great for left or right-handed shooters. Its steel construction guarantees it can take the weight of whatever you've mounted to your VMP-1, giving you a sling solution which is both reliable and looks professional. Compatibility-wise, this plate will work with both the original VMP-1 and VMP-1X but isn't compatible with the VMP-1C. 

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on AEG Electric Rifles between the Receiver and the Buffer tube allowing the attachment of Slings.

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings. 

If you're following modern real steel trends and want a red dot on your sidearm, Airsoft Artisan has what you need! The RMR Mount w/ Front & Rear Sight for WE EU17 GBB includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your WE EU series GBB pistol. 

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. This set is designed for the WE EU17 GBB and as such should also fit WE EU19 and EU34 GBB pistols but won't fit WE EU18 GBB pistols due to their redesigned slide. If your EU series needs a touch of modernity, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for WE EU17 GBB will provide!

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

If you like your sidearm equipped with the latest sight setup, you'll need the RMR Mount w/ Front & Rear Sight for Tokyo Marui EU17/26 GBB from Airsoft Artisan. This set includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your Tokyo Marui EU17 or EU26 GBB pistol.

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. Compatibility-wise, this set is designed for the Tokyo Marui EU17 Gen 3 and EU26 GBB pistols but in all likelihood won't fit the newer EU19, EU34 or the full auto EU18. If you need to get on target faster with your handgun, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for Tokyo Marui EU17/26 GBB is what you need!

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

A 20mm RIS compatible scope mount ring, designed to enable users to mount VORTEX's high quality optics onto their Airsoft guns or real firearms.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.

The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!