M4 & AR-15 Variant Airsoft Assault Rifles

If you prefer the old days when real men carried full-length rifles, you'll definitely be into the Specna Arms SA-B06 ONE™ M16A4 AEG! This full metal M4/AR-15 platform is based around Specna's original ONE™ series M16A4 but now comes equipped with the Kestrel Basic ETU, a programmable MOSFET which is far more advanced than its moniker "Basic" suggests!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 509mm 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M16A4 AEGs on the market!

Whether you're working on a GWOT-era USMC loadout or you prefer the iconic M16 silhouette to its prolific shorter sibling, the Specna Arms SA-B06 ONE™ M16A4 AEG; Kestrel Basic ETU is the big M4 you need!

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

The CQB beast is back again, and better than ever! This latest top-quality AEG offering from G&G accepts the widely used and Airsoft 5.56mm STANAG Magazine - basically any Airsoft M4/AR15 AEG magazine - making this incredibly practical for Airsofters with a large stockpile of Airsoft STANAG mags, and gear set up for M4/AR15 mags. Sporting the performance of the ARP9 in a new, all-metal package with ambidextrous controls, the G&G ARP556 wants for nothing!

If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas. 

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!

The CQB beast is back again, and better than ever! This latest top-quality AEG offering from G&G accepts the widely used and Airsoft 5.56mm STANAG Magazine - basically any Airsoft M4/AR15 AEG magazine - making this incredibly practical for Airsofters with a large stockpile of Airsoft STANAG mags, and gear set up for M4/AR15 mags. Sporting the performance of the ARP9 in a new, all-metal package with ambidextrous controls, the G&G ARP556 wants for nothing!

What better way to show your fandom of the awesome John Wick movie series than collecting replicas of all the pistols and rifles wielded by our hero? With the advent of the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG, that goal has become closer than it ever has been! The EMG JW2 boasts full metal construction, a flawless finish and absolutely incredible performance, as we might expect from a replica manufactured by CYMA Platinium with official licencing from TTI itself.

On the outside, we have a 14.5-inch smooth profile outer barrel with a TTI muzzle brake, a CNC machined aluminium KeyMod rail system, the uniquely designed Taran Tactical AR-15 receiver and flawless engraved and laser engraved TTI markings across the design, perfectly replicating the rifle used by the boogie man in John Wick: Chapter 2.

The internal parts are equally impressive; the JW2 boasts a 6.03mm tightbore inner barrel, alloy rotary HOP-up unit, extensively upgraded CYMA Platinium high speed E-Edition internals, a high speed motor and the CYMA Platinum MOSFET to keep everything in check. If you want to bury the other team like JW does to all the goons in the film, the EMG JW2 should give you your best chance!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries. 

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds. 

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB. 

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries. 

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds. 

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB. 

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it.

On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

An Electric Powered Airsoft AEG, designed to look like the MK12 Special Purpose Rifle which is currently in service and used by the US Navy SOCOM Units, and was built by CYMA with custom design elements added by P&J and is the perfect base for a DMR Rifle. 

If you need something for busting bunkers or you are hunting an alien lifeform with active camouflage and thermal vision, an M4 with M203 grenade launcher is what you need to get the job done! This bundle combines the SA-G01, a full metal M4 AEG with an M203 40mm grenade launcher pre-installed with a pair of NUPROL 40mm MOSCART Gas Grenades and a big ol' bag of Delta Armory BBs. 

"This gun will make you a god damned sexual Tyrannosaurus, just like us!"

An Airsoft 6mm BB AEG gun, powered by electric and is a replica of the M4A1 Assault Rifle with custom parts. The weapon is primarily constructed from Lightweight yet durable Polymer, with Alloy Parts and Internals. 

If you like a high-tech platform for a great price, this bundle should please you! The Double Eagle Binary Blaster Bundle combines a Double Eagle EFCS equipped AEG with binary trigger capability with an ASG B&T Tracer unit and some VORSK 0.25g Tracer BBs. 

For information on how to program your Double Eagle EFCS platform for binary trigger and other functions, see the "Further Information" section of the product description at the bottom of the page. To fit the tracer you will need to remove the grub screw in the flash hider and remove it, screwing on the ASG B&T tracer unit in its place, but other than that you are ready to go! 

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.

This is not only the perfect purchase for a beginner, but as a spare or backup gun for Experienced Players, due to its hard wearing and reliability.

Whether you are new to Airsoft and want to start with something full metal for a realistic experience or you know your way around an AR and need a base gun for your next build, the ARCTURUS M4/AR-15 CQB AEG AT-AR01-CQ would be a fine choice. This M4/AR-15 platform AEG boasts full metal construction with plenty of steel parts, a CNC aluminium M-LOK handguard and a reinforced version 2 gearbox bristling with upgrades, focussing on smooth running and efficiency. 

ARCTURUS' focus on high quality materials is evident as soon as you lay your hands on this AEG; the sharp details on the handguard and receiver are far more precisely formed than many of its rivals and all of the controls bar the charging handle are steel, guaranteeing a long life of perfect functionality no matter how rough you are with it! With a 6.01mm steel tightbore inner barrel, a rotary HOP-up, microswitch trigger and a wide range of enhanced gearbox internals, the AT-AR01-CQ is a modern means-business M4/AR-15 which feels as nice in the hands as it shoots in a skirmish!

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

The CM.097A Platinum edition provides a complete, high-end AEG out of the box. With pre-upgraded features such as a Micro-switch trigger, MOSFET, and quick change spring system built into the premium gearbox the Cm.097A Platinum edition offers incredible performance and a package that is half the price of its rivals.

An amazingly solid AR platform replica from CYMA, in a series of rifles which could possibly be the greatest AEGs they have ever released. Not only is it almost entirely made from Aluminium externally, it features a MOSFET, Microswitch Trigger, Quick Change Spring and many more internal bonuses.

This is the best GBBR on the market, no debate. The Tokyo Marui M4A1 CQB-R Block 1 has inspired plenty of other brands with its unique ZET system. This gas blowback system provides this replica with a thunderous recoil and an extremely realistic feel, any skirmisher will be impressed with this rifle, from mil-sim to casual players, this Tokyo Marui rifle is a lot of fun for anyone!

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, as many upgrade parts and replacement pieces are built to work for Tokyo Marui platforms, not that you will need many aftermarket parts because this CQB-R is built to perform well and last a long time. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui CQB-R GBB Rifle Block 1 will certainly satisfy you!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic. 

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle, with its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C22 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle, with its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C22 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you prefer shorter AR platforms and want something full metal with a programmable MOSFET, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. Also present inside is the Delta Armory EAGLE™ programmable MOSFET/ETU, a serious game changer!

With the EAGLE™ ETU, you can program the fire controls for burst modes of various durations, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking using only the trigger and fire selector of the gun itself. The result is an incredibly advanced M4 AEG with almost unlimited flexibility via the advanced EAGLE™ ETU and full compatibility with aftermarket upgrades for those who want more. If you like your ARs as cutting edge on the inside as they are externally, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!