Airsoft Electric Parts - Hop-Up and Parts

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package. 

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs. 

If you are having HOP-up troubles with your M4 platforms, don't worry, G&G has just the thing for you! This HOP-up chamber is a replacement part and comes with the necessary pieces for installation, but does not include a HOP-up rubber or a nub. The main chamber is made from high-density polymer and is compatible with all M4-style AEGs which have V2 Gearboxes. It's a reliable and high-quality replacement part that will help your AEG shoot like brand new again!

The rotary adjustment dial is the latest and greatest way of setting your rifle's HOP. It is much more accurate and provides finer increments of adjustments when compared to previous gear-style HOP-up adjustments.

A replacement Hop-Up Unit for Airsoft AK Rifles, designed and constructed to high standards by Action Sports Games in Denmark as part of their Ultimate Upgrade Parts Range. 

If you're working on the ultimate AK AEG build, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is an integral part! This CNC machined HOP-up unit is made from 7075 Aluminium, granting it steel-like strength and flawlessly precise machining with the weight reduction perks of aluminium. 

The most unique aspect of this HOP-up unit is the inclusion of what RetroArms call the "collet nut", a threaded nut which seals the gap between the inner barrel and HOP-up chamber walls. This saves you any messing around with PTFE tape and ensures your platform's air-seal is perfect, resulting in more consistent FPS readings translating to improved accuracy downrange. 

The set includes everything you'll need to complete the HOP-up unit with the exception of the bucking, nub and inner barrel but will require assembly. As such, we only recommend this HOP-up unit to those confident working on Airsoft internals. Best used with the RetroArms CNC Version 3 Gearbox but compatible with almost every TM-based AK AEG on the market, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is a fantastic upgrade option for performance-oriented AK build!

Turn your stock ASG Scorpion EVO's HOP-up chamber to a TDC design without having to replace the whole unit. This kit includes everything you need to install the system into your current HOP-up chamber. It is compatible ONLY with ASG Scorpion EVOs and will not fit in any other HOP-up systems.

TDC (Top-Down-Centre) HOP units are incredibly sought after due to the increased friction they add to BBs, which increases the effectiveness of the HOP applied to your BBs. By installing TDC to the stock HOP-up you are guaranteed compatibility with the platform.

The set also includes rubber nubs, these ensure the HOP is stable while BBs accelerate through the unit, further improving the performance and consistency of your ASG Scorpion EVO. This is a very complex installation process and we only recommend it if you are confident in your understanding and ability to fit it to your HOP-up chamber.

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This ARCTURUS Polymer Rotary Hop-Up Unit W/Magwell Spacer For Ak Serie is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Magwell Spacer is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well to protect it and prevent over-insertion. We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

Delivers more range and improved accuracy from your Arisoft AEG. Designed for primerally M4 AEGs but may be compatible with other AEGs that use an M4 style hop unit.