Airsoft Boneyard

This replica is in the Boneyard due to its missing magazine and rear iron sight. We cannot immediately identify any other faults and are unable to test functionality due to the lack of a magazine, though it is assumed to be working fine. It isn't in the best of external conditions, showing signs of previous use. A replacement magazine will need sourcing to get this thing shooting again.

Note that this replica comes in a Pre Two-Tone blue, this means a UKARA or other defence will not be required upon purchase.

This replica is in the Boneyard with a missing slide lock, a replacement of which will need to be sourced to get this pistol back in working order. Note that the magazine originally provided with this pistol is nowhere to be seen, so a replacement for that will be needed to get shooting too.

This pistol has a sticky slide. We attempted to use lubricant when testing, however this provided little to no benefit. Potential fixes may include a stronger recoil spring or shaving contact points where there appears to be high resistance. In testing, we were seeing an average of 150 FPS using 0.20g BBs and ASG ULTRAIR 135 PSI Gas, a result that unfortunately indicates that there may be more issues at play than just the sticky slide.

This replica was originally in the Boneyard due to it not feeding correctly, though we could not verify this as the magazine is nowhere to be seen. When attempting to see if the replica cycles, plugging in a battery and pulling the trigger resulted in absolutely nothing, suggesting that there may be more significant issues at play that will need to be tackled with the gearbox or even wiring.

Two-Tone green might not be many people's first choice for a war replica, but we're sure this piece could serve well as a wall hanger or prop regardless. Note again that the magazine is missing, so a replacement will need to be sourced if you would like to display the platform with one inserted.

This replica is in the Boneyard with a snapped receiver. It is unrepairable, so is recommended to those who could benefit from having some spare SVD parts...

This replica is in the Boneyard due to its broken handguard (chunk missing shown in third image). Aside from this, the replica is fully functional and fires at a perfectly legal 330 FPS on 0.20g BBs!

Though the handguard is painted blue, the overall platform does not meet the VCRA criteria for Two-Tone. Accordingly, a UKARA or other defence will be required upon purchase.

This replica has been brought back to us firing exclusively in full auto. When it is firing however (in full auto), it's firing at around 305 FPS on 0.20g BBS, meaning it's perfectly skirmishable in the appropriate environments.

If you know your way around a selector plate, this one shouldn't be too much hassle for you (if that's where the problem is). The magazine originally provided with the gun is missing, so a replacement will need to be sourced in order to get shooting.

This beautiful replica was used as parts for a warranty repair. The trigger linkage and hammer sear are now missing, meaning this replica will be non-functional until replacements are sourced. Aside from the missing parts, this replica looks brand new and would make an exceptional display piece or prop.

This AEG is dead. Plugging both a 7.4v and 11.1v battery into the replica results in nothing (not even a voltage beep that Gate's MOSFETs usually do). It's likely the installed MOSFET is dead. Externally the platform is in pretty good condition, aside from the strip of marks seen on the outer barrel. It must also be noted that the magazines originally provided with this thing are nowhere to be seen, so replacements for those will be needed.

It's unknown why this rifle was originally doomed to the Boneyard, but during testing it seems that the gearbox is locked or the trigger is locked up in some way. In semi, it sounds like something is happening but the replica doesn't cycle. Full auto on the other hand doesn't do anything at all. One thing to note is that the wiring in the platform becomes uncomfortably hot when a battery is connected. Due to this, we advise that you should only pick up this Boneyard if you have a strong background in tech work and wiring.

Though the replica is non-functional, it could still make for an awesome wall hanger/display piece!

It's unknown why this replica was originally sent to the Boneyard, but when attempting to test the thing, it simply doesn't work. We're completely unsure on what issues may be at play here. It's recommended that this awesome replica be used as a prop or display piece, though if you're an experienced AEG techie, it may be a fun project for you to figure out if you want to get shooting with a classic M14 replica!

This replica was originally sent to the Boneyard due to some selector issues - apparently it only fired in full auto, though in our testing it wouldn't fire at all. We're completely unsure what issues may be at play here... The pin and spring for the bolt latch on the left side of the replica are missing, so replacements may need to be sourced for these later down the line, though their absence should not affect performance or functionality in any way.

A classic M14 replica, this thing may be best served as an awesome looking prop/display piece, so won't even need any tech work. Though if you do want to get it back up and running again, prepare for the risk of opening a can of worms...

This SMG has landed in our boneyard due to its low power output - we were seeing results around the 100 FPS mark on our chronograph, so it's likely the gun has a compression issue or an incorrect spring installed. With a potentially easy fix, this platform would be a fantastic choice for anyone wanting to get in on some CQB action. It has Double Eagle's latest FALCON EFCS installed too, so you'll be ready to get up and go above everybody else's pace once you manage to get it shooting powerfully enough...

Ex-display; functionally this replica is completely fine other than the wear on the bolt. This would be a perfect sidearm for those that are going for an authentic WW1 German loadout. Do take note that due to being powered by CO2 and having no adjustment for power output; this replica is not site legal as it's shooting 390 FPS +/-10%.

This replica has found its way to the boneyard after a long run as a Two-Tone example/display piece in our Showroom. The gun itself should be fully functional and in an almost brand-new condition, aside from the now red painted exterior and potential slight wear from touch.

This replica is being sold as non-functional. It simply will not fire. The fire selector itself (the ambidextrous side) has fallen off, so a replacement will need to be sourced for this if you do manage to get the gun back up and running. The stock's buttpad seems to come off easier than it should too, so a touch of glue may be advisable there.

Overall, this gun may be better used as a source of parts, but if you're up for the task... this might just be your winter project to fix-up.

This replica has been returned to us with an issue reported that "it stops working after 15 minutes"...

If this is true, it can be skirmished, but only in 15 minute intervals! Jokes aside, this replica is untested: we'll leave that fun to you. We believe this replica may be best suited as a wall hanger or even a prop. Given the Two-Tone, a UKARA is not required to purchase this gorgeous piece of history.

Caution: When splitting the replica in half, ensure the bolt is pulled back to avoid damaging the bolt and/or hop unit.

This replica is suffering from a series of trigger-related issues, resulting in it being unable to fire. This could be an easy or difficult project to repair, but who doesn't love a good gamble? As you can see from the images, the replica has been painted in a two-tone fashion, meaning a UKARA won't be required for purchase.

Whether you're wanting it for a project, wall hanger, or even a video prop - this thing's an absolute bargain!

Caution: When splitting the replica in half, ensure the bolt is pulled back to avoid damaging the bolt and/or hop unit.

This item is being sold as a Boneyard as it is missing a tappet plate spring, and so will not fire properly. This could potentially be fixed by those of you with the necessary spare parts and technical knowledge who fancy a bit of a tinker, but for now it is being sold as non-functional. Hey, at least it it cycles, right? Externally the rifle is in fantastic condition with little to no marks or scratches to be seen, so this replica could make for an exceptional wall hanger/display piece.

This rifle has found its way to the boneyard after a long run as a Two-Tone example/display piece in our Showroom. The gun itself should be fully functional and in an almost brand-new condition, aside from the now painted exterior and potential slight wear from touch.

This Shotty won't pump! There seems to be some kind of disconnect between the trigger and the pump, as you simply can't rack the thing. This could be a quick project for shotgun experts, or an awesome wall hanger/prop for the rest of us.

Due to the nature of the problem we were unable to test this platform, so more issues may be at play than we're aware of.

This DSG G&G Firehawk was returned to us with an internal fault, rendering it "dead". When tested, the gun clicks but does not cycle. If you have the technical skills and fancy a tinker, this could be a fantastic project for you!

Externally, this Firehawk is in near-perfect condition, with only a slight wobble in the handguard and very minor marks on the receiver.

This M4 AEG is in the Boneyard due to reported inaccuracy. We couldn't test it at range, so do not know the true severity or direct cause of the problem. This could be a potential quick hop fix, or a whole can of worms to be opened - the gamble is yours! Aside from the reported inaccuracy, the platform is in fantastic external condition and should be functional.

This gas powered FABARM shotgun has a jammed pump. We're unsure on the root cause or any potential fixes to this issue, but you unfortunately won't be able to rack it. A unique platform, this one will be well worth your time to fix up, or could serve well as a display piece/prop.

This gas powered FABARM shotgun has a jammed pump. We're unsure on the root cause or any potential fixes to this issue, but you unfortunately won't be able to rack it. A unique platform, this one will be well worth your time to fix up, or could serve well as a display piece/prop.

This gas powered FABARM shotgun is in the Boneyard with several problems. It has supposedly been used for parts, though we're unsure what exactly is now missing. Its pump tends to jam when racked and the trigger does nothing. The shell tube towards the front of the platform is also broken - the threaded section for the cap is no longer secured into the tube. There may be more ongoing problems but we cannot diagnose these due to the platform not being in a functional enough condition to test. Overall this might be quite a big task to fix up, so may be better used to take more parts from, or just to serve as a pretty cool wall hanger!

This SMG-5K AEG is in the Boneyard as it's missing its MOSFET and wiring... This renders the thing non-functional, and will require new internal components to get back up and running again. On top of this, the platform's charging handle seems to have snapped off at some point, leaving the bolt sliding freely inside the handguard.

This replica is in the Boneyard with a feeding issue - we're unsure if this is related to the magazine or the replica itself, though BBs simply aren't being injected into the replica with the magazine supplied in the box. Due to this, this replica is untested.

This pretty pink sniper rifle has a broken cylinder. If you're able to purchase and install a replacement, then this will be an easy fix!

This rifle is suffering from some problems with its bolt and the cocking of it. If you pull back the bolt and return it to battery, there is no spring tension at all throughout the process, and it doesn't reset the trigger. Ultimately, it's dead. If you're a technician with some prior experience with springers, this could be a decent project for you to figure out...