Airsoft Magazines

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you desire to dump 350 BBs without the added effort of swapping magazines but don't want to mess with a HPA setup then this is your chance! This WE 350rnd Green Gas Drum Magazine is designed for WE 1911 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines. 

If you have dreams of building an old school SMG-5 but you can't find the right high-cap mags, get them here while they last! The CYMA 200rnd Old School Straight High-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are high-caps for AEGs, meaning extra capacity, less time spent reloading and more opportunities to get kills before refilling. These mags should be compatible with practically any SMG-5 AEG platform out there and also the CM.106, CYMA's AR-9 platform. The mags can be loaded through the fill window at the top of the magazine body by opening the window and pouring BBs in straight from the bottle. With your BBs loaded, all you need to do is to wind the winding wheel on the bottom until it becomes firm, then get shooting!

Whether you are going old school with your SMG-5 build or not, straight mags give this iconic SMG a whole new look and can be a great way to make your SMG-5 platform AEG stand out!

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a tasty 500 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.

Looking for a fast winding high-capacity AK magazine? The NUPROL 500rnd High-Cap Magazine is designed to work with AK47/74 AEG rifles but is a 7.62x39mm style magazine with a significant curve, making it ideal for AK47s and AKM rifles. The mag is a flash magazine high-cap and can be filled through the fill window at the top of the magazine body and is tensioned via the winding cord which is hidden beneath the hinged baseplate and can be accessed by pulling the baseplate down from the front.

This mag holds an impressive 500 BBs, meaning in most cases you will not need to reload in an entire battle round unless you are particularly heavy on the trigger! The magazine is constructed from stamped steel with the classic AK reinforcing ribs stamped into each side, making it great for old-school AK setups and OPFOR loadouts.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

A 145rnd clockwork wound high capacity magazine for the Well R-4 series of SMG-7 styled Airsoft AEP.