Airsoft Silencers, Suppressors & Tracer Units

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

The Swiss Arms QD Suppressor will comfortably sit on any M4 Type Bird Cage Flash Hider. It features 4 steel ball bearings which friction lock onto your flash hider to keep the suppressor securely fastened. If you're looking for that sneaky aesthetic, with the option to quickly detach it if you need to, then this is the suppressor for you.

To attach the suppressor to your flash hider loosen the threads and sit it over your flash hider. Then tighten the suppressor until it is firmly attached to your flash hider. To quickly detach the suppressor, simply loosen the threading and it can be pulled off with ease.

The suppressor is constructed from alloy and is compatible with the M4 Type Bird Cage Flash Hider, which can be mounted on any Airsoft platform. Whether you are taking your DMR build in a sneaky direction or creating an assault rifle for stealthy style, the Swiss Arms QD Suppressor is the perfect finishing touch!

If you are looking for an uncommon tracer unit design with muzzle flash functionality, the T238 Griffon Tracer unit is one to watch. This unit has a unique triangular housing giving it a cutting-edge look, styled similarly to the real steel Griffin Blast Shield and is constructed from aluminium with a thick polycarbonate aperture cover on the front. 

This unit offers both tracer and muzzle flash functionality, allowing you to use either muzzle flash, tracer or both, with mode selection applied via the rear "on/off" button. Powered by an internal rechargeable battery charged via micro-USB, this tracer is convenient and economical to run and can support rates of fire up to an absolutely epic 50 rounds per second! No matter how speedy your build is or how much you value realism, this tracer unit has both bases covered!

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

Looking for a mini-suppressor you can add and remove when you feel like it? Check out the Dummy Special Force Sound Suppressor from 5KU! Mimicking a real firearm suppressor, this thing functions more like a sound amplifier for Airsoft purposes and gives your primary and intimidating muzzle report.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

If you're interested in going sneaky on the cheap, the Big Dragon 135x34mm Dummy Suppressor; 14mm CCW & CW should suit your needs. This aluminium dummy suppressor is equipped with 14mm CCW threading at one end and 14mm CW threading at the other, meaning it can be used on both common CCW barrels and awkward CW barrels. 

Featuring a foam internal filling stabilised with a steel spring, the Dummy Suppressor should slightly muffle the muzzle report of your AEG or GBB, though its main purpose is to provide sneaky looks. Weighing in at 117 grams approximately, this suppressor is ideal for AEG and GBB rifles but can still be used on GBB pistols, potentially with a slight reduction in gas efficiency. 

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel. 

If you are building a modernised AK rifle and you want the sneaky special forces look the PUTNIK suppressor from 5KU would be the best thing for it. This suppressor is based on the real steel Zenitco PUTNIK and can be attached to any Airsoft AEG with 14mm CCW male threads via the included steel adapter, and its built-in threads allow it to be fitted to 24mm CW male threads found on some Airsoft AKs. The suppressor is constructed from alloy and has a foam filling which will slightly dampen the muzzle report of your AEG or GBB, and the suppressor can also be disassembled if you want to add an inner barrel extension. For the modern suppressed AK look there is no better suppressor!

If you're looking for a suppressor which departs from the norm with a futuristic profile, the Novritsch Rectangular Modular Suppressor V2 is the one. This CNC aluminium suppressor boasts an acoustic foam filling for effective sound dampening and can be reconfigured into 3 different lengths to suit any build objective. 

This version of the Modular Suppressor V2 mounts to either 14mm CCW male threaded outer barrels or 16mm CW threaded outer barrels depending on the variant you choose, meaning an easy fit on most AEG assault rifles and SMGs and a specific variant for MK23 and SSX23 NBBs. Its lightweight nature makes it ideal for GBB pistols with tilting barrels, and we recommend using the shortest configuration for the best possible gas efficiency. Included in the set are a pair of additional bolts, allowing you to use the suppressor at full-length (170mm), mid-length (110mm) and ultra-short (80mm) configurations. If you need a suppressor with a modern look to suit your cutting-edge build, the Novritsch Modular Suppressor V2 is ideal!

If you need some tracer action in your life but you run a shotgun, the 5KU Tracer Choke for Shotguns is what you want! This aggressively styled tracer unit mimics real steel shotgun breaching chokes and provides muzzle flash and tracer functionality to any Airsoft shotgun with an outer barrel with a 22.5mm or 23.5mm outer diameter.

The tracer mounts via 4 grub screws on the collar using friction, and we recommend ensuring the screws are properly tight and the unit is mounted straight before testing it out. The activation button is located underneath the rear collar, as is the USB Type-C charger port for the integral rechargeable battery, requiring the rear collar to be unscrewed to access. Available modes include tracer with muzzle flash, tracer only and muzzle flash only, ideal for those who want all the fire but none of the tracer and those who want tracer functions without lighting up the room and giving their location away. 

Two variants of the Tracer Choke are available to suit different shotguns; one for 22.5mm outer diameter barrels and one for 23.5mm. Make sure you measure up before ordering! If you grace CQB sites with a trusty shotgun at your side, the 5KU Tracer Choke for Shotguns is a must!

If you need some tracer action in your life but you run a shotgun, the 5KU Tracer Choke for Shotguns is what you want! This aggressively styled tracer unit mimics real steel shotgun breaching chokes and provides muzzle flash and tracer functionality to any Airsoft shotgun with an outer barrel with a 22.5mm or 23.5mm outer diameter.

The tracer mounts via 4 grub screws on the collar using friction, and we recommend ensuring the screws are properly tight and the unit is mounted straight before testing it out. The activation button is located underneath the rear collar, as is the USB Type-C charger port for the integral rechargeable battery, requiring the rear collar to be unscrewed to access. Available modes include tracer with muzzle flash, tracer only and muzzle flash only, ideal for those who want all the fire but none of the tracer and those who want tracer functions without lighting up the room and giving their location away. 

Two variants of the Tracer Choke are available to suit different shotguns; one for 22.5mm outer diameter barrels and one for 23.5mm. Make sure you measure up before ordering! If you grace CQB sites with a trusty shotgun at your side, the 5KU Tracer Choke for Shotguns is a must!

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot. 

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

The smallest Tracer Unit in the world just got better! Now brighter and more efficient than ever before, the Xcortech XT301 is back in business in its' MK2 form. Compatible with both 14mm CCW and 11mm CW Pistol Threads, the XT301 MK2 will help you to own the night.

The smallest Tracer Unit in the world just got better! Now brighter and more efficient than ever before, the Xcortech XT301 is back in business in its' MK2 form. Compatible with both 14mm CCW and 11mm CW Pistol Threads, the XT301 MK2 will help you to own the night.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

If you're working on a British Army KS-1/L403A1 build or you're into the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your shopping list! This suppressor is constructed from CNC machined aluminium and is flawlessly finished, as we would expect from Angry Gun. The set includes the suppressor itself, the shroud (pre-installed) and the flash hider, making it ready to mount on any 14mm CCW male threaded outer barrel.

The suppressor mounts to the tri-prong flash hider via an innovative QD mechanism which requires you to index the pin on the flash hider with the corresponding groove inside the suppressor collar. With this done, turn the shroud counter-clockwise (with the front of the suppressor facing away) to tighten and lock the suppressor in place. The shroud can be removed from the suppressor but we don't recommend this as it can cause damage and ruin the QDC/MCQ-PRT's beautiful finish, which would be a real shame!

The build quality of this suppressor simply cannot be overhyped; if you put it down next to the real deal you'd be hard-pressed to tell them apart! If you're working on a KS-1 build or you want a squat, menacing suppressor in line with the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your build!

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

If you're looking for a stylish muzzle device which can mount to multiple platforms, the PTS Syndicate Griffin Armament® QD Blast Shield Gen 2 should suit! This Blast Shield is made from CNC machined 6061 aluminium and is licenced by Griffin Armament®, meaning flawless dimensional accuracy and full compatibility with PTS's range of Griffin Armament M4SD muzzle devices.

One of the neat tricks the QD Blast Shield has up its sleeve is the ability to mount to most A2 birdcage style flash hiders, meaning if you don't have a PTS Griffin Armament flash hider there is a high likelihood this will fit your original flash hider. Please note, as tolerances can differ between manufacturers, we cannot guarantee compatibility with all A2 birdcage flash hiders. 

The QD Blast Shield mounts via its Gate-LOK™ QD mechanism, requiring the circular leaf spring at the base of the suppressor to be pulled away from the collar and the QD mech lifted up and out of the device, allowing it to slip over your flash hider and be locked into place. We suggest proceeding with care when installing this device on non-PTS Griffin muzzle devices as you may damage its flawless finish! 

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!