Viewing 480 of 491.
grid
list
99.00 kr.
  • Mid-cap magazine
  • No rattle
  • 80rnd Magazine


For all you AUG lovers out there wanting to keep shooting with the need of winding. This magazine can hold up to 80 rounds and is filled from the top using a speed loader. Featuring a  classic waffle design, the mag makes it easier to grip and quicker to remove from pouches. The magazine works via a spring system, so when filled with BBs will not Rattle, unlike hi-cap magazines.

This is the perfect magazine for those who have a Steyr AUG Airsoft AEG and want more magazines so they can keep playing for longer without reloading.

109.00 kr.
  • Replacement pick n pluck foam
  • For the NUPROL Essentials Rifle Hard Cases
  • Freshen up your hard case!

If you have plucked too much or your case foam has got a bit dirty, NUPROL has the cure! The Essentials Hard Case Replacement PnP Foam is sized to fit their NUPROL Essentials Rifle Hard Cases perfectly and is an easy and affordable way to breath new life into an old and weary hard case.

119.00 kr.
  • 70rnd mid-cap magazine
  • Lightweight polymer design
  • For Tokyo Marui NGRS M4/AR15

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

119.00 kr.
  • 70rnd mid-cap magazine
  • Lightweight polymer design
  • For Tokyo Marui NGRS M4/AR15

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

179.00 kr.
  • 9.9v / 1100mAh / 20C
  • Mini Tamiya Connector
  • For Handguards/Stocks

A 9.9V LiFe (Lithium Iron Phosphate) battery for Airsoft, RC and other hobbies. Ideally suited to sit in a handguard or stock, this battery provides a higher voltage (and rate of fire) over standard Airsoft batteries.

410.00 kr. Pack price
Normally 477.00 kr.
Save 67.00 kr.
  • Battery, charger & charging bag bundle
  • 7.4V 1450mAh Crane LiPo Battery with Deans connector
  • Ideal for M4/AR-15 AEG Crane Stock battery compartments

If you need a battery for your M4/AR-15 AEG Crane stock and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configuration with a Deans connector; an ideal setup for a Deans equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2 cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

99.00 kr.
  • 70rnd Capacity
  • Windowed mag design with mock cartridges
  • For Airsoft AUG AEG rifles

If you need magazines but you also want to add a more realistic look to your AUG the NUPROL W-Mag would be a great choice. This magazine holds 70 BBs and is loaded through its fill/feed port, located on the top of the magazine body, using an Airsoft speed loader.

This mag features a tiled type texture with lower dot pattern for a more modern magazine design to complete your AUG.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft AUG AEG.

99.00 kr.
  • 380rnd Capacity
  • Windowed mag design
  • For Airsoft M4/AR15 AEG rifles

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

99.00 kr.
  • 70 round capacity
  • Mid-cap magazine
  • Lightweight polymer build

NUPROL bring us another variant in the ever popular AK magazine range. With lightweight polymer construction, this mag is that of a mid-cap magazine, meaning that the magazine is filled at the top using a speedloader. Being a mid-cap means that there is no 'battle rattle' meaning that no BBs can be heard rattle around in the mag during skirmishes unlike high-cap magazines.

Holding 70 rounds, this mag has a somewhat unique design as it has a smooth and glossy black aesthetic, that would complement more modern AK loadouts perfectly. The low price point only makes these mags that bit more appealing!

129.00 kr.
  • 420ml Contents
  • Pressurised container
  • Folding application nozzle

A degreasing spray from NUPROL intended primarily for Airsoft applications such as cleaning old grease and grime out of a gearbox, barrel or anywhere else it is that it shouldn't be! This Degreaser can be used on alloy and plastic parts but we do not advise using it on rubber components due to its petroleum content.

299.00 kr.
  • 2200mAh
  • Crane Battery
  • 11.1v 15C LiPo

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

420.00 kr. Pack price
Normally 477.00 kr.
Save 57.00 kr.
  • Battery, charger & charging bag bundle
  • 7.4V 1450mAh LiPo Battery with Mini-Tamiya connector
  • Ideal for M4/AR-15 AEG buffer tubes

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery with a Mini-Tamiya connector; an ideal setup for a Deans equipped rear wired M4/AR-15 AEG with a buffer tube battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 1.3cm x 1.5cm with approximately 9cm of wiring between the battery and connector

420.00 kr. Pack price
Normally 477.00 kr.
Save 57.00 kr.
  • Battery, charger & charging bag bundle
  • 7.4V 1450mAh LiPo Battery with Mini-Tamiya connector
  • Ideal for M4/AR-15 AEG Crane stock battery compartments

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configurations with a Mini-Tamiya connector; an ideal setup for a Mini-Tamiya equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2x cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

179.00 kr.
  • For Right Handed Shooter
  • Belt Paddle System
  • Lightweight Holster

A retention holster designed to fit snugly WE B92 Series Airsoft Pistol and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe.

139.00 kr.
  • 2 x Pieces
  • Easy To Shape
  • Protect Guns & Gear

The must have foam for those looking to protect their gear during transit and storage. Easy to pluck, this foam can wrap around your guns, gear, camera equipment and more very easily.

169.00 kr.
  • 11.1v 2000mAh
  • Stick Configuration
  • Deans or Mini Tamiya

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

229.00 kr.
  • 2 x Pieces
  • Easy To Shape
  • Protect Guns & Gear

A block of pick n pluck foam for the Nuprol Extra Large Wheeled Hard Case series, which can be shaped to fit the contents of your case.

269.00 kr.
  • 3 x Compartments
  • Water & Dust Drainage
  • Wide Adjustable Strapping

An incredibly lightweight storage solution from NUPROL that can store a standard hydration bladder at the same time. There are 2 compartments in total, the front smaller one is ideal for storing your ammo and other small canisters.

229.00 kr.
  • Steel construction
  • Seesaw target array
  • 8 Knock down targets

If you're looking for an exciting way to hone your shooting skills, the NUPROL Seesaw Target is ideal. This seesaw-style target array is constructed entirely from steel, making it well up to the task of surviving a lifetime of getting hammered with BB hits. 

The array is equipped with 8 circular knock-down targets which will fall off when hit, causing the whole array to seesaw back and forth. This makes the next target harder to hit; a fantastic way to practice engaging sudden threats and moving targets. We've already had great fun playing with our sample Seesaw Target, facing off against each other to see who can clear the array the fastest, though it can be very difficult unless you use the right tactics!

Psst...Try to balance the array by shooting targets on alternate sides in succession!

Even if you're shooting solo, this challenging target setup is a fantastic way to get sharp with your shooting and the ideal addition to your home target range!

989.00 kr.
  • 400 Lumens CREE LED 
  • Adjustable red aiming laser
  • Alloy construction with polymer parts

For those who use a pistol as a primary weapon; this would be perfect for your setup! The NUPROL NX400 hybridizes the NX300 tactical pistol flashlight with a red aiming laser which is fully adjustable and can be zeroed effectively thanks to the revised NX400 mount which is machined as part of the body and attaches to your rails using a robust steel thumb screw. The NX400 uses the same intuitive activation switch found on the NX300 and NX200 flashlights but has a spicier 400-lumen CREE LED and a red aiming laser which can be used together with the white light LED or on its own, with the white light locked off for more stealthy work.

The NX400 squeezes a lot of functionality into a compact package and would be perfect for an "offensive handgun" or primary pistol, but can also be used on rifles, and will be particularly well suited to those with a compact front end and limited rail space. 

119.00 kr.
  • Magazine Adapter
  • For NUPROL Fastloader
  • Fits '36' Series Magazines

A Polymer constructed adapter for the NUPROL Fastloaders, which lets you refill '36' series magazines rather than just M4 magazines. This is great news for anyone who runs a '36' series Airsoft Gun and has a tonne of magazines that all need filling up before games. Or maybe you just don't like to carry spare magazines, and need the ability to quickly top up your mags on the move. Either way, if you have a NUPROL Fastloader and want to use it on something other than M4 magazines, you need one of these adapters.

69.00 kr.
  • For 20mm RIS
  • "Go Professional"
  • Allen Key Tightened

A RIS compatible mount for your 'Action Camera', which allows you to mount a wide range of compact cameras to your replica, helmet, or anywhere with a 20mm RIS rail.

89.00 kr.
  • Secure your kit!
  • Small & Robust
  • Thick Metal Shackle

A padlock that is incredibly useful for securing your Airsoft cases and gear. It is designed to work with NUPROL's vast range of hard cases, but can be put to any use with enough imagination.

129.00 kr.
  • Magazine Adapter
  • For NUPROL Fastloader
  • Fits AK Series Magazines

A Polymer constructed adapter for the NUPROL Fastloaders, which lets you refill AK series magazines rather than just M4 magazines. This is great news for anyone who runs an AK platform Airsoft Gun and has a tonne of magazines that all need filling up before games. Or maybe you just don't like to carry spare magazines, and need the ability to quickly top up your mags on the move. Either way, if you have a NUPROL Fastloader and want to use it on something other than M4 magazines, you need one of these adapters.

719.00 kr.
  • 300 Lumens CREE LED 
  • Ambidextrous rocker switch
  • Alloy construction with polymer parts

Having a tactical flashlight mounted on your Airsoft pistol is a great way to gain the upper hand in dark and challenging CQB sites. Tactical flashlights can be used to navigate, and also to disorient the enemy team as you breach a room. The NUPROL NX300 is constructed from alloy, and sports a bright CREE LED with 300 Lumens output. The NX300 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters.

This flashlight is designed to present a switch on either side of the trigger guard of a pistol, but can also be mounted on an Airsoft rifle with a short front end and provide ambidextrous activation for those who like to switch shoulders to make the most of cover when things get up close and personal.

89.00 kr.
  • PnP Foam
  • Case Inserts
  • For NUPROL Pistol Case

A Spare PnP / Pick & Pluck Soft Foam Insert for your NUPROL Pistol Hard Case!

99.00 kr.
  • Highly detailed
  • Moving slide and hammer
  • Spice up your keys!

If you are the type of Airsofter who lets their passion bleed through into everyday life, and you are absolutely unashamed of your awesome hobby, this keyring from NUPROL belongs on your keys. This is the M9G Series Keyring and includes a highly detailed miniature replica pistol with a moving trigger, slide and hammer, and a removable magazine. This keyring is available in several different colours to suit any taste.

539.00 kr.
  • Polymer construction
  • 1200rnd Capacity
  • Auto winding drum magazine for M4/AR15 AEG

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an auto winding design which requires 3x AAA batteries to operate.

539.00 kr.
  • Polymer construction
  • 1200rnd Capacity
  • Auto winding drum magazine for M4/AR15 AEG

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an auto winding design which requires 3x AAA batteries to operate.

119.00 kr.
  • Remote pressure switch
  • For NUPROL NX600 short and long
  • Provides momentary-on functionality

If you have damaged your original pressure switch you are in luck! Knowing what we are like, NUPROL now offers their standard pressure switch for the NX600 series of flashlights as a separate part so you aren't stuck with the tail cap switch if your original switch is damaged. This switch has a standard SF type connector and is designed for the NX600 short or long version, but may also be compatible with other SF style scout lights.

About NUPROL

NUPROL is one of the biggest names in Airsoft, manufacturing well-known brands such as VORSK, RAVEN and of course, NUPROL's own. They are also responsible for distributing many other well-known brands such as G&G, LCT, WE, A&K, BOLT and many more.

As a result, NUPROL provides and produces a wide array of Airsoft products, from Airsoft guns to accessories, parts and batteries, so you can be sure to find what you are looking for in one of NUPROL's many product lines, no matter how specific.

If you need a beginner Airsoft AEG, try the NUPROL Pioneer series, our top beginner platform and an Airsoft M4 AEG series known for reliability, high performance and low cost. If a Gas pistol is more your thing, NUPROL offers a massive range of different styles, from EU series pistols to 1911 and Hi-capa GBBs. 

The NUPROL Airsoft brand is designed to excel in quality and provide each player with a perfect Airsoft combat experience during every skirmish. The NUPROL range has everything you need for a high level of functionality at a reasonable price point.