CYMA Airsoft

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you want to mount a suppressor or tracer unit to your CYMA CM.702 series sniper rifle, this is the adapter you need! Constructed from steel and designed to mount to the CM.702's 20x1mm female barrel threading, the CYMA 14mm CCW Thread Adapter for CM.702 Series Sniper Rifles provides a 14mm CCW male thread at the tip, ready for the most common Airsoft tracer units and suppressors. 

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

If you need a new cylinder head to fix up your Dragunov, check this out! The CYMA Aluminium Cylinder Head for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and is fitted with two O-rings to seal any gaps between it and the cylinder for perfect efficiency and minimal air loss. 

The cylinder head also has a sound dampening pad installed on the rear face which reduces gearbox noise and protects the piston head from the force of repeated impacts. A replacement original part for the CYMA CM.057 SVD/SVU series, this cylinder head is also compatible with the old Real Sword Dragunov SVD!

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD. 

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov. 

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap

For those wanting to get into Airsoft skirmishing on the cheap, without sacrificing anything needed to compete on the field, this one will suit your needs! Introducing the CYMA CM.607 M4A1 AEG, a part alloy part polymer M4 set up to mimic the US Army's current issue carbine, sporting a tight bore inner barrel for maximum accuracy and a well-tuned and smooth running gearbox capable of a mean rate of fire and snappy trigger response!

The CM.623 is the perfect starter gun, coming bundled with a MOSFET, Quick Change Spring, Microswitch Trigger and a reinforced Nylon Fibre body for an amazing price.

Looking for a classic style AK but with some minor modern twists? This might just be what you've been after! Here we have another addition to the battle-proven and bomb-proof CM.045 series. It features stamped steel externals as well as an alloy HOP chamber, steel 7mm bushings, directional piston head and a spring guide w/ bearings.

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle. 

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui. 

This Alloy Suppressor is designed for Airsoft Guns with a 14mm CCW Male Thread, and features Foam Baffles on the inside, supported by a spring core to provide rigidity. The dimpled end cap of the Suppressor can be removed to access the internals. Whether you need to hide an Inner Barrel extension or you just want to add some 'tactical' to your replica, this Suppressor is perfect.

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!

A replacement side mount plate for CMYA AK47/74 series Airsoft AEG weapons, which when fitted allows users to install AK style side-mounted scope mounts. 

If you have dreams of building an old school SMG-5 but you can't find the right high-cap mags, get them here while they last! The CYMA 200rnd Old School Straight High-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are high-caps for AEGs, meaning extra capacity, less time spent reloading and more opportunities to get kills before refilling. These mags should be compatible with practically any SMG-5 AEG platform out there and also the CM.106, CYMA's AR-9 platform. The mags can be loaded through the fill window at the top of the magazine body by opening the window and pouring BBs in straight from the bottle. With your BBs loaded, all you need to do is to wind the winding wheel on the bottom until it becomes firm, then get shooting!

Whether you are going old school with your SMG-5 build or not, straight mags give this iconic SMG a whole new look and can be a great way to make your SMG-5 platform AEG stand out!

Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.

The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

A durable 2 point tactical sling, designed for use with Airsoft AK series weapons, from the AK47 to the various designs based on it.

If you're a sneaky skirmisher seeking an affordable starter pack, the CYMA CM.513 M4 SD AEG Beginner Bundle was made with you in mind! This bundle includes the stealthily styled CM.513 Suppressed M4 SD, 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.

All you have left to buy to get started is your choice of face and eye protection. If you're looking for an easy and affordable way to get into Airsoft, this bundle is it!

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

Fans of the SR-25 platform rejoice! This Airsoft Electric Gun is the finest replica of the firearm we have seen without breaking the bank or doing a tonne of modification out of the box. Featuring a MOSFET, Microswitch Trigger and Quick Change Spring to name a few, this is the perfect out-of-the-box gun.

If you're looking for an affordable way to spice up your build, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great shout. This motor is the standard motor provided in CYMA's top-of-the-line Platinum E-Edition AEGs, a high torque motor powered by Neodymium magnets. Being a high-torque motor, this motor is ideal for DMR builds requiring stronger springs and CQB builds seeking improved trigger response but is easily fast enough to give most AEGs a significant ROF boost!

This version is the Long Shaft model, designed for M4/AR-15, P90, SMG-5 (not the -K model) and G3 AEGs and includes a pre-installed D-type pinion gear constructed from steel. The pinon spring is also included and the motor is pre-wired for spade connectors, meaning there is no need to break out the soldering iron to install it. If you're looking for a snappier trigger, building a DMR or seeking an increase in rate of fire, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great affordable option!