Double Eagle Honey Badger w/ Fire Control System Edition

The gun features an Alloy outer barrel assembly for a strong core, coupled with reinforced Nylon Polymers for the rest of the externals for a tough but lightweight (2kg) overall build - making it a great choice for those who like to rush and get right into the face of the enemy.

If you're looking for an AEG with some truly unique features you've come to the right place: the replica features Double Eagles latest creation, the FALCON EFCS fire control system. Usually only seen in custom builds and high end AEG this feature is a welcome inclusion, allowing for 1-5 round bust mode, a bump fire trigger, as well as various gun and battery protection features to boot. The 1-5 round burst mode and bump fire settings can also be set at the same time, with bump-fire being used in semi-auto mode, and 1-5 round burst replacing the full auto mode. The fire control system is designed to be used with 7.4v Li-Po and 11.1v Li-Po and prevents the replica from firing when it detects a current draw spike, or if the battery voltage is too low. The EFCS fire system is configurable using simple trigger pulls and requires no external tools, special adaptors or a PC to function. For more information please see the Special Instructions Section.

The replica is fully ambidextrous for use during an Airsoft Skirmish, with an ambidextrous fire select and magazine release, something rarely seen in Airsoft M4 replica. The fire select is even raised to make it easier to select your fire mode even when wearing gloves. The mock charging handle is also ambidextrous, as well as the stock adjustment release buttons, with sling loop to the rear. The large block where the buffer tube traditionally would be doubles up as the battery storage compartments, making it perfect for PEQ style 11.1v LiPo battery.

If your looking to modify the furniture on the gun you have plenty of options, with a full top length 20mm RIS / RAS rail for attaching red dots, holographic, and even large sight and scope set ups, and an MLOK hand-guard for attaching modular components. If the stock of the replica isn't to taste it can be removed, as well as the front flash hider for replacing with suppressors and tracer units.

In the box you are supplied with the replica, a 300rnd High Capacity wheel wound magazine, and instructions, as well as a battery adaptor to allow deans batteries to be used, a magazine winding key and replacement deans connector should you want to re-wire the replica straight to deans.

This AEG is great for those Airsoft Skirmishers who are looking for a high end gun, at a mid-range price. With plenty of space for external upgrades and an electronic control system in place this replica has features which will make the mouths water of even the most seasoned Airsoft Skirmishers.

Features

• Features Double Eagles brand new FALCON Electronic Gearbox Design
• Based on the M4 / AR Platform
• Electric powered Airsoft AEG
• Honey Badger CQB Stock
• Compatible with 7.4v and 11.1v battery
• FALCON EFCS Gearbox and Battery Protection
• 1-5 Shot Fire selection mode
• Trigger sensitivity adjustment
• Bump fire trigger mode
• Bump mode for semi-auto trigger mode
• 1-5 Shot fire select for full auto mode
• MLOK handguard
• Removable flash hider
• Mock charging handle which pulls back to reveal the hop-up unit
• Mock bolt release which releases the mock bolt plate
• Mock ambidextrous bolt release
• Ambidextrous magazine release
• Integrated receiver QD Sling loop mount points
• Radial adjustable hop-up unit for accuracy and precision
• Straight, flat trigger
• Flared trigger guard
• Raised fire select switch for easy use even with gloves
• Textured ergonomic pistol grip
• Adjustable motor screw height
• Flip up removable ironsights for 20mm RIS/RAS rail
• Full top length 20mm RIS / RAS rail
• Removable flash hider secured by grub screw
• Three position adjustable PDW style tactical stock
• Rubberised butt plate
• Branded:
  • 'FALCON Fire Control System'
  • 'DE AIRSOFT'

Package Includes

• M904 Honey Badger w/ Fire Control System Edition
• Magazine
• Instruction Manual
• Tamiya to Deans connector
• Deans Female Connector
• Magazine Winding Key

Special Instructions

Please note that the gun's EFCS system is only compatible with LiPo Batteries, and is not compatible with LiFe or NiMh batteries.

Please note that both binary fire and burst modes can be set, as binary fire is applied to semi, and 1-5 fire mode is applied to full auto.

Please note that fitting the supplied deans connector will constitute a modification of the replica, and if you carry out this modification you will not be able to return your replica. 

FALCON EFCS Protection Feature

Gearbox Protection

When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.

If the voltage of the battery is too high the EFCS power supply will automatically disconnect and the motor will vibrate twice.

Battery Protection

The FALCON EFCS has an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. If the voltage of your battery is too low, the FALCON will notify the user via 5 vibrations, then cut the power to protect your battery. 

Vibration Description

• 1 - Power On
• 2 - System Error
• 3 - Voltage too high
• 5 - Low Voltage

Falcon Electronic Fire Control System

1-5 Shot Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger once and release to enter 1-5 shot programming mode, release when the motor makes a sound.
• Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
• Set the fire select to full auto.

Trigger Sensitivity

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger twice and release to enter sensitivity programming mode, release when the motor makes a sound.
• Pull the trigger between 1-3 times for different levels of sensitivity.
  • 1 - Highest Sensitivity
  • 2 - Standard Sensitivity
  • 3 - Low Sensitivity

Binary Fire Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger three times and release to enter bump fire programming mode, release when the motor makes a sound.
• Set the fire selector to semi-auto
• Repeat the same process to disable bump fire

Reset to Default

• Set the fire select to SAFE.
• Pull the trigger and hold for 5 seconds to reset all settings.