Two-Tone Airsoft Submachine Guns

A compact Airsoft Electric Pistol which is a replica of the CZ VZ-61, the perfect backup to another gun or as a Primary Gun for Close Quarter Scenarios.

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

This Airsoft 6mm electric powered SMG-5 is an Alloy and Polymer constructed replica of the traditional SMG-5 layout, favoured by Airsofters doing SAS/Police loadouts.

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

The Thompson M1A1 is a historic World War sub-machine gun, however, it mostly rose to fame in the darkened back alleys of a Mafia-run New York City and was catapulted into infamy as the go-to gun for gangsters and lawmen during the 1920s due to its large magazine capacity and high rate of fire.

The Snow Wolf Thompson M1A1 does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you love a piece of history, you'll love the AGM STEN MK II AEG SMG! This full metal STEN gun replica is based on the real steel STEN MK II, the most commonly produced variant of this legendary British SMG. Constructed almost entirely from steel with all the details a true STEN fan would expect, the AGM STEN is internally equipped with a version 7 gearbox and fixed HOP-up optimised for 0.25g BBs, giving you a simple and reliable platform, just like the real deal. 

Whether you're looking for a base gun for a post-apocalypse build or a STEN for your WW2 OSS, French Resistance or British Army loadout, the AGM STEN MK II is a fantastic choice for a superb price!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

Based off the real world M3 / M3A1 Submachine gun, also known as the 'Grease Gun', this is a high quality replica of an iconic historical weapon.

If you're looking for a lightweight beginner platform and you like sneaky SMGs, this is the one to go for! The Golden Eagle SMG-5 SD6 AEG Submachine Gun Replica is styled after an iconic SMG design we all know and love, constructed from high density polymer so you can run around all day without feeling the burn.

While it may be cheap, the Golden Eagle SMG-5 SD6 doesn't compromise on build quality, being constructed from strong high-density polymer with a matt finish indicative of fibre reinforcement with an aluminium suppressor at the front. Inside, you will find an alloy version 2 gearbox with full Tokyo Marui compatibility, boasting 7mm ball-bearing bushings for a smoother gearbox sound. A 6.03mm tightbore inner barrel is also present, a nice bonus to squeeze a bit more accuracy and FPS out of the platform. If you want a suppressed subgun to match your sneaky playstyle, the Golden Eagle SMG-5 SD6 fits the bill but won't break the bank!

An accurate Airsoft replica of one of the most iconic SMG's of all time, the STEN MK.II was the most common variant of the STEN gun family

If you're looking for an iconic submachine gun to use in World War II re-enacting or fancy skirmishing with a fully functional 6mm BB Airsoft replica that faithfully replicates one of the most iconic guns the era, the STEN MK II has a no-frills and uncomplicated design born out of wartime expediency. 

With full metal construction, the STEN MK.II AEG is the perfect weapon of choice for the history loving Airsofter.

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

If you are looking for a Thomspon SMG but you have very high standards for realism, this should pique your interest! The CyberGun M1A1 Thompson is a gas blowback replica of what is probably one of the most famous submachine guns of World War 2 and boasts full metal construction with flawless Auto-ordnance Corporation trademarks and highly detailed faux wood furniture. 

The insanely iconic SMG-5K, popularised by movies as being every bad guys SMG of choice. This replica has an Alloy body to bring it to a realistic weight, and features a folding stock to make it more useful both indoors and outdoors.

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

Looking for a CQB pocket rocket that can also serve as a sniper's sidearm? The APC9-K from Arrow Arms is a highly modern micro-SMG with fully ambidextrous controls, 20mm rails in all the spots they are needed and pre-upgraded internals for ferocious performance on the battlefield. The APC9-K comes with 3 magazines in the box, and boasts full metal construction with a CNC machined aluminium upper receiver and high density polymer parts with the strong, textured feel indicative of fibre reinforcement.

The real version of this SMG has recently been adopted by the US Army and US Airforce in the VIP protection role and also serves with the Miami Beach Police Department. If you ever wanted to skirmish in a suit, or while wearing garish beach garments you now have your excuse!

An accurate 6mm BB Airsoft Electric Gun replica of an iconic piece of movie history, an all Alloy constructed replica of the Sterling E-11 Blaster. 

A Gas Blowback 6mm BB Airsoft Submachine Gun, designed to be as compact and maneuverable as possible whilst still supplying the same power and features of a full sized rifle.

If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world. 

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!

If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Jing Gong SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.

On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design, Jing Gong has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

If you are looking for an SMG that stands out like a sore thumb, the ARCTURUS PP-19-01 ZTAC SP1 is the one to go for! This AK based SMG is kitted out to the nines with Zco-style furniture including an extended railed handguard, built-in rail riser and PT-1 multi-adjustable stock. The set also includes a DTK-2 style muzzle brake and a DTK Saiga suppressor, giving you the option to rock the stealthy look or run a beastly muzzle brake for the intimidation factor.

The fun doesn't end with the externals either; inside we are treated to the very best parts ARCTURUS has to offer, including a CNC steel 13:1 high speed gearset running on 8mm ball bearing bushings, a steel quick change spring guide and a 24K RPM high torque motor. These high strength, low-friction parts are kept in check by the Perun V3 optical ETU/MOSFET which offers adjustable pre-cocking, burst modes of various durations and rate of fire adjustment, to name but a few. As one of only 500pcs worldwide, if you want this SMG make sure you make it a priority!

An Airsoft replica of the PP-19 Bizon 18mm variant. The Airsoft weapon is constructed almost entirely from Alloy, with a Polymer grip and handguard, meaning its durable & tough and feels great in the hands.

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills!